Juniper JN0-650 Exam Dumps, Practice Test Questions

100% Latest & Updated Juniper JN0-650 Practice Test Questions, Exam Dumps & Verified Answers!
30 Days Free Updates, Instant Download!

Juniper JN0-650  Premium File
$54.99
$49.99

JN0-650 Premium File

  • Premium File: 107 Questions & Answers. Last update: Nov 7, 2026
  • Latest Questions
  • 100% Accurate Answers
  • Fast Exam Updates

JN0-650 Premium File

Juniper JN0-650  Premium File
  • Premium File: 107 Questions & Answers. Last update: Nov 7, 2026
  • Latest Questions
  • 100% Accurate Answers
  • Fast Exam Updates
$54.99
$49.99

Juniper JN0-650 Practice Test 7

Question 60

A network change is required for the following specific situation: An OSPF neighbor remains Down because the routed transit interface was left passive after a site template rollout. Which corrective action is most appropriate?

  1. Restrict the export policy to explicit approved route prefixes and protocols, then check external LSAs.
  2. Move OSPFv3 participation to the correct active interface and verify neighbor and IPv6 RIB state.
  3. Check IPv6 link-local addressing, OSPFv3 neighbor state and relevant ICMPv6 connectivity on the actual interface.
  4. Remove passive behavior only from the approved router-to-router transit link and check Hello and neighbor states.

Explanation

Correct Answer

D:

Making a link passive suppresses OSPF adjacency formation even when its prefix remains eligible for advertisement. Verify this by checking that hellos are observed in the routing adjacency and a Full neighbor appears on the intended port.

Incorrect Answers

A:

“Restrict the export policy to explicit approved route prefixes and protocols, then check external LSAs” belongs to a separate Interior Gateway Protocols (IGPs) issue: an ABR starts leaking a management static route into the enterprise IGP after a permissive export term was introduced. It does not explain the condition tested here.

B:

“Move OSPFv3 participation to the correct active interface and verify neighbor and IPv6 RIB state” belongs to a separate Interior Gateway Protocols (IGPs) issue: a new IPv6 peering uses OSPFv3 on a retired VLAN unit rather than the active routed transit interface. It does not explain the condition tested here.

C:

“Check IPv6 link-local addressing, OSPFv3 neighbor state and relevant ICMPv6 connectivity on the actual interface” belongs to a separate Interior Gateway Protocols (IGPs) issue: an IPv6 branch outage is misdiagnosed using only IPv4 pings, despite OSPFv3 neighbors using IPv6 link-local messaging. It does not explain the condition tested here.

Question 61

Which suggested shortcut would be especially unsafe for this exact situation? A phone supports LLDP-MED but the switch sends no med TLVs after a policy template disables the feature.

  1. Test both tagged phone frames and untagged PC frames during phone-port commissioning.
  2. Capacity-plan PoE power classes and reserved headroom before connecting new powered devices.
  3. Assume enabling ordinary LLDP globally is guaranteed to activate every LLDP-MED policy automatically.
  4. Validate PD power profiles and test peak draw rather than idle boot alone.

Explanation

Correct Answer

C:

The tempting alternative fails because base LLDP discovery and LLDP-MED telephony advertisement are distinct capabilities and may require separate enablement. The supported action is to review LLDP and LLDP-MED operational status and enable supported MED policy for phone access.

Incorrect Answers

A:

That prevention measure relates to a phone-with-PC desk deployment lets the PC reach data services while the tagged voice stream is dropped by VLAN membership.; it is not the unsafe shortcut described here.

B:

That prevention measure relates to a high-power phone intermittently reboots whenever all powered endpoints on a switch chassis start simultaneously.; it is not the unsafe shortcut described here.

D:

That prevention measure relates to a phone's LLDP-negotiated power demand exceeds its access port's allocated PoE limit and it repeatedly restarts.; it is not the unsafe shortcut described here.

Question 62

The team believes it has resolved this Junos issue: A distribution node learns connected subnets but never sends Hello packets on its OSPF transit port due to passive-interface policy. Which observation best verifies the specific intended result?

  1. The expected prefix becomes active locally while unwanted external prefixes remain filtered.
  2. An OSPFv3 neighbor forms and approved IPv6 prefixes appear in inet6.0.
  3. The preferred primary route wins when healthy and the backup becomes active on a controlled failure.
  4. Hellos are observed in the routing adjacency and a Full neighbor appears on the intended port.

Explanation

Correct Answer

D:

Hellos are observed in the routing adjacency and a Full neighbor appears on the intended port. This checks the relevant result after remove passive behavior only from the approved router-to-router transit link and check Hello and neighbor states.

Incorrect Answers

A:

“The expected prefix becomes active locally while unwanted external prefixes remain filtered” belongs to a separate Interior Gateway Protocols (IGPs) issue: an OSPF import policy hides external routes on one device while neighbors retain them, confusing the team reviewing reachability. It does not explain the condition tested here.

B:

“An OSPFv3 neighbor forms and approved IPv6 prefixes appear in inet6.0” belongs to a separate Interior Gateway Protocols (IGPs) issue: an IPv6-only branch has OSPFv3 Hellos on the wrong logical unit after interface renumbering, so no IPv6 routes appear. It does not explain the condition tested here.

C:

“The preferred primary route wins when healthy and the backup becomes active on a controlled failure” belongs to a separate Interior Gateway Protocols (IGPs) issue: an OSPF policy update redistributes a route without an appropriate external metric, shifting traffic to a slow backup. It does not explain the condition tested here.

Question 63

Which suggested shortcut would be especially unsafe for this exact situation? Two EX distribution routers in OSPF area 0 remain in ExStart after a new transit VLAN uses inconsistent interface MTUs.

  1. Validate active logical-interface mappings and IPv6 adjacency as part of change acceptance.
  2. Document expected external metrics and run primary/backup failover tests during policy changes.
  3. Disable the MTU check indefinitely without identifying why adjacent links differ.
  4. Keep IPv4 and IPv6 routing verification separate for dual-stack maintenance.

Explanation

Correct Answer

C:

The tempting alternative fails because OSPF database-description exchange can stall when adjacent interfaces disagree on MTU even though basic Hello connectivity exists. The supported action is to compare interface MTUs and OSPF neighbor states, then align the supported interface MTU on both endpoints.

Incorrect Answers

A:

That prevention measure relates to a new IPv6 peering uses OSPFv3 on a retired VLAN unit rather than the active routed transit interface.; it is not the unsafe shortcut described here.

B:

That prevention measure relates to a branch receives two external paths with different metric-type assumptions after a policy change and prefers the wrong exit.; it is not the unsafe shortcut described here.

D:

That prevention measure relates to an IPv6 branch outage is misdiagnosed using only IPv4 pings, despite OSPFv3 neighbors using IPv6 link-local messaging.; it is not the unsafe shortcut described here.

Question 64

A Junos enterprise team investigates this incident: A troubleshooting team expects EVPN Ethernet auto-discovery route Type 1 to carry all host MAC/IP bindings. Which technical explanation most directly identifies the cause or design principle?

  1. EVPN route types carry different information: Type 1 Ethernet auto-discovery, Type 2 MAC/IP, Type 3 inclusive multicast.
  2. VNI and bridge-domain mapping determines tenant overlay segmentation; misaligned mappings can misdeliver or isolate traffic.
  3. VXLAN adds encapsulation overhead, so underlay MTU must accommodate the intended overlay frame size.
  4. VXLAN encapsulates overlay traffic across an IP underlay; VTEP reachability is necessary even with valid BGP EVPN control-plane state.

Explanation

Correct Answer

A:

EVPN route types carry different information: Type 1 Ethernet auto-discovery, Type 2 MAC/IP, Type 3 inclusive multicast. The appropriate response is to inspect the route type appropriate to the claimed control-plane information instead of treating all EVPN NLRIs equally.

Incorrect Answers

B:

“VNI and bridge-domain mapping determines tenant overlay segmentation; misaligned mappings can misdeliver or isolate traffic” belongs to a separate EVPN issue: a campus extension carries the right VXLAN outer header but directs frames to the wrong tenant bridge domain due to bad VNI mapping. It does not explain the condition tested here.

C:

“VXLAN adds encapsulation overhead, so underlay MTU must accommodate the intended overlay frame size” belongs to a separate EVPN issue: an EVPN-VXLAN frame is dropped over a path where the IP underlay MTU was sized only for unencapsulated Ethernet payloads. It does not explain the condition tested here.

D:

“VXLAN encapsulates overlay traffic across an IP underlay; VTEP reachability is necessary even with valid BGP EVPN control-plane state” belongs to a separate EVPN issue: a VXLAN overlay's BGP EVPN routes are present, but the underlay cannot route to a remote VTEP loopback. It does not explain the condition tested here.

Question 65

The team believes it has resolved this Junos issue: A switch rollout splits a team that should communicate within one PVLAN community, while protecting it from another community. Which observation best verifies the specific intended result?

  1. Two customers can use overlapping inner VLAN numbers without traffic mixing on the transport.
  2. The VLAN registration propagates to the intended downstream trunk and reaches its member ports.
  3. Both switches show compatible region membership and intended instance root/port roles.
  4. Community members can communicate as intended while cross-community access remains blocked.

Explanation

Correct Answer

D:

Community members can communicate as intended while cross-community access remains blocked. This checks the relevant result after map the trusted endpoints to the proper community secondary VLAN and keep other groups segregated.

Incorrect Answers

A:

“Two customers can use overlapping inner VLAN numbers without traffic mixing on the transport” belongs to a separate Ethernet Switching and Spanning Tree issue: an aggregation network sees customer VLAN IDs collide because several tenants share the same single-tagged provider infrastructure. It does not explain the condition tested here.

B:

“The VLAN registration propagates to the intended downstream trunk and reaches its member ports” belongs to a separate Ethernet Switching and Spanning Tree issue: a shared uplink carries dynamically registered VLANs until one device has MVRP disabled during an upgrade. It does not explain the condition tested here.

C:

“Both switches show compatible region membership and intended instance root/port roles” belongs to a separate Ethernet Switching and Spanning Tree issue: an uplink becomes a region boundary unexpectedly after an administrator changes an MSTP configuration name on only one switch. It does not explain the condition tested here.

Question 66

Which suggested shortcut would be especially unsafe for this exact situation? A provider-facing policy stops honoring a route-tag community after a new import policy changes the attached communities.

  1. Validate every route-reflector client and failover path in topology inventory before conversion.
  2. Track every BGP advertise-inactive exception and test cross-protocol route selection.
  3. Assume attaching a BGP community automatically prevents all external redistribution without policy.
  4. Include next-hop reachability tests in iBGP and route-reflector deployment acceptance.

Explanation

Correct Answer

C:

The tempting alternative fails because communities are policy metadata; tagging does not enforce advertisement restrictions unless a matching policy acts on it. The supported action is to inspect received communities and export policy terms, then attach a tested community match and reject rule.

Incorrect Answers

A:

That prevention measure relates to a full-mesh iBGP design is converted to route reflection but one peer is treated as an ordinary nonclient and route propagation fails.; it is not the unsafe shortcut described here.

B:

That prevention measure relates to an engineer adds advertise-inactive and downstream peers begin receiving a BGP route that loses to an OSPF route locally.; it is not the unsafe shortcut described here.

D:

That prevention measure relates to an iBGP route is received from a reflector but hidden because its third-party next hop is unreachable in inet.0.; it is not the unsafe shortcut described here.

Question 67

The team believes it has resolved this Junos issue: A campus changes a telephone port but LLDP-MED location data remains mapped to an old floor. Which observation best verifies the specific intended result?

  1. The critical phone remains powered during a simulated shortage while lower-priority devices are shed as designed.
  2. The phone receives stable negotiated power and the chassis stays within its supported budget under peak load.
  3. The device stays powered during peak consumption and Junos reports no power-denial events.
  4. The phone or location service reports the correct emergency location for the new access port.

Explanation

Correct Answer

D:

The phone or location service reports the correct emergency location for the new access port. This checks the relevant result after update the approved location mapping and confirm transmitted LLDP-MED location information on the affected port.

Incorrect Answers

A:

“The critical phone remains powered during a simulated shortage while lower-priority devices are shed as designed” belongs to a separate IP Telephony Features issue: a switch assigns equal PoE power priority to every port and disconnects an emergency phone before low-priority signage during a power shortage. It does not explain the condition tested here.

B:

“The phone receives stable negotiated power and the chassis stays within its supported budget under peak load” belongs to a separate IP Telephony Features issue: a high-power phone intermittently reboots whenever all powered endpoints on a switch chassis start simultaneously. It does not explain the condition tested here.

C:

“The device stays powered during peak consumption and Junos reports no power-denial events” belongs to a separate IP Telephony Features issue: an emergency intercom can establish Ethernet link but loses power during activity because its PD class is not supported by that port. It does not explain the condition tested here.

Question 68

Which suggested shortcut would be especially unsafe for this exact situation? OSPFv3 peering comes up but the desired IPv6 loopback is not in the routing database after a rollout.

  1. Restart the entire OSPFv2 process and assume this fixes a missing OSPFv3 loopback.
  2. Validate per-interface OSPF area assignments from an approved topology matrix before commit.
  3. Make physical and logical MTU parity part of transit-link commissioning and review.
  4. Test one allowed and one forbidden route against each export policy term before deployment.

Explanation

Correct Answer

A:

The tempting alternative fails because an established OSPFv3 neighbor does not prove every desired IPv6 interface prefix is included in the protocol topology. The supported action is to inspect IPv6 interface addresses and OSPFv3 interface participation, then add the intended loopback advertisement within policy.

Incorrect Answers

B:

That prevention measure relates to a campus OSPF interface is accidentally placed in area 0 while its neighbor advertises a nonbackbone area, preventing a Full adjacency.; it is not the unsafe shortcut described here.

C:

That prevention measure relates to two EX distribution routers in OSPF area 0 remain in ExStart after a new transit VLAN uses inconsistent interface MTUs.; it is not the unsafe shortcut described here.

D:

That prevention measure relates to an OSPF export term filters routes based on the wrong protocol, so an intended static default is not originated.; it is not the unsafe shortcut described here.

Question 69

The team believes it has resolved this Junos issue: A VSTP network intended to send voice and data VLANs over different active paths instead blocks both on the same uplink. Which observation best verifies the specific intended result?

  1. Isolated clients reach the shared service but cannot communicate laterally with other isolated clients.
  2. Two isolated tenant ports cannot reach each other but can reach the permitted gateway uplink.
  3. Selected voice and data VLANs use the approved active links without loops.
  4. The customer control protocol reaches the far endpoint without altering the provider's own spanning-tree topology.

Explanation

Correct Answer

C:

Selected voice and data VLANs use the approved active links without loops. This checks the relevant result after inspect VSTP VLAN membership, root priority and port roles, then repair the intended per-VLAN root arrangement.

Incorrect Answers

A:

“Isolated clients reach the shared service but cannot communicate laterally with other isolated clients” belongs to a separate Ethernet Switching and Spanning Tree issue: a private VLAN isolated endpoint reaches the local gateway but cannot access a peer service that should be shared via a permitted promiscuous port. It does not explain the condition tested here.

B:

“Two isolated tenant ports cannot reach each other but can reach the permitted gateway uplink” belongs to a separate Ethernet Switching and Spanning Tree issue: a lab uses one primary VLAN for many tenants but isolated access ports can still exchange Layer 2 frames after a misconfiguration. It does not explain the condition tested here.

D:

“The customer control protocol reaches the far endpoint without altering the provider's own spanning-tree topology” belongs to a separate Ethernet Switching and Spanning Tree issue: a private L2 service must extend customer control protocols, yet the provider fabric consumes or drops the customer's BPDUs. It does not explain the condition tested here.

Question 70

The team believes it has resolved this Junos issue: Two equal LOCAL_PREF and AS-path candidates remain tied until MED influences the choice under the applicable comparison rules. Which observation best verifies the specific intended result?

  1. The routing and forwarding tables show the intended multiple next hops only for qualifying routes.
  2. The downstream client learns approved prefixes and cluster-loop checks remain operational.
  3. The route is accepted only after the AS-path loop is removed, with stable forwarding.
  4. The chosen best path follows the documented attribute ordering rather than a single observed MED value.

Explanation

Correct Answer

D:

The chosen best path follows the documented attribute ordering rather than a single observed MED value. This checks the relevant result after read all relevant candidate attributes and apply policy consistent with intended tie-breaker precedence.

Incorrect Answers

A:

“The routing and forwarding tables show the intended multiple next hops only for qualifying routes” belongs to a separate Border Gateway Protocol (BGP) issue: two eBGP sessions over different transports are expected to provide ECMP but only one forwarding next hop appears. It does not explain the condition tested here.

B:

“The downstream client learns approved prefixes and cluster-loop checks remain operational” belongs to a separate Border Gateway Protocol (BGP) issue: a route-reflector topology loses an iBGP-advertised prefix because clients are not configured under the intended reflector cluster. It does not explain the condition tested here.

C:

“The route is accepted only after the AS-path loop is removed, with stable forwarding” belongs to a separate Border Gateway Protocol (BGP) issue: the local AS appears in a received external BGP AS_PATH and the route is rejected despite valid prefix reachability. It does not explain the condition tested here.

Enterprise Routing and Switching, Professional (JNCIP-ENT) (JN0-650) Practice Tests

UP

SPECIAL OFFER: GET 10% OFF

This is ONE TIME OFFER

ExamSnap Discount Offer
Enter Your Email Address to Receive Your 10% Off Discount Code

A confirmation link will be sent to this email address to verify your login. *We value your privacy. We will not rent or sell your email address.

Download Free Demo of VCE Exam Simulator

Experience Avanset VCE Exam Simulator for yourself.

Simply submit your e-mail address below to get started with our interactive software demo of your free trial.

Free Demo Limits: In the demo version you will be able to access only first 5 questions from exam.