Juniper JN0-650 Exam Dumps, Practice Test Questions

100% Latest & Updated Juniper JN0-650 Practice Test Questions, Exam Dumps & Verified Answers!
30 Days Free Updates, Instant Download!

Juniper JN0-650  Premium File
$54.99
$49.99

JN0-650 Premium File

  • Premium File: 107 Questions & Answers. Last update: Nov 7, 2026
  • Latest Questions
  • 100% Accurate Answers
  • Fast Exam Updates

JN0-650 Premium File

Juniper JN0-650  Premium File
  • Premium File: 107 Questions & Answers. Last update: Nov 7, 2026
  • Latest Questions
  • 100% Accurate Answers
  • Fast Exam Updates
$54.99
$49.99

Juniper JN0-650 Practice Test 55

Question 540

The team believes it has resolved this Junos issue: A video source is known and receivers support IGMPv3, but engineers configure ASM and an RP unnecessarily for the source-specific application. Which observation best verifies the specific intended result?

  1. Subscribed receivers get the stream without unnecessary flood to ports that did not join.
  2. PIM joins build the intended shared tree and the requested group begins forwarding to subscribers.
  3. Restricted groups are stopped at the boundary while approved collaboration streams still reach subscribers.
  4. Receivers subscribed to the intended (S,G) get traffic while nonselected sources cannot join that flow.

Explanation

Correct Answer

D:

Receivers subscribed to the intended (S,G) get traffic while nonselected sources cannot join that flow. This checks the relevant result after select an appropriate SSM group range and verify source-specific IGMPv3/PIM signaling on the supported platform.

Incorrect Answers

A:

“Subscribed receivers get the stream without unnecessary flood to ports that did not join” belongs to a separate IP Multicast issue: an access VLAN floods every multicast packet because IGMP snooping state was lost during migration. It does not explain the condition tested here.

B:

“PIM joins build the intended shared tree and the requested group begins forwarding to subscribers” belongs to a separate IP Multicast issue: an ASM video distribution has valid listener memberships yet PIM joins never converge toward the configured RP. It does not explain the condition tested here.

C:

“Restricted groups are stopped at the boundary while approved collaboration streams still reach subscribers” belongs to a separate IP Multicast issue: an edge router uses a broad multicast filter that blocks valid collaboration groups alongside restricted lab streams. It does not explain the condition tested here.

Question 541

To prevent recurrence of this precise networking failure, which practice should be adopted? A new leaf imports VNI reachability but packets disappear because its VXLAN tunnel endpoint IP is unresolved.

  1. Keep route-type purpose and acceptance checks in EVPN troubleshooting runbooks.
  2. Validate EVPN Type 2 and Type 3 propagation separately in new VNI bring-up tests.
  3. Audit ESI consistency and platform-supported multihoming mode across paired leafs.
  4. Include underlay loopback reachability and MTU checks in VXLAN overlay deployment QA.

Explanation

Correct Answer

D:

Include underlay loopback reachability and MTU checks in VXLAN overlay deployment QA. This guards against VXLAN encapsulates overlay traffic across an IP underlay; VTEP reachability is necessary even with valid BGP EVPN control-plane state.

Incorrect Answers

A:

“Keep route-type purpose and acceptance checks in EVPN troubleshooting runbooks” belongs to a separate EVPN issue: a fabric advertises Type 3 routes and claims this proves specific remote host MACs are reachable. It does not explain the condition tested here.

B:

“Validate EVPN Type 2 and Type 3 propagation separately in new VNI bring-up tests” belongs to a separate EVPN issue: a VNI is active on two leafs but unknown-unicast or broadcast replication never reaches the remote side. It does not explain the condition tested here.

C:

“Audit ESI consistency and platform-supported multihoming mode across paired leafs” belongs to a separate EVPN issue: a multihomed CE is attached to two leafs but one leaf advertises a different ESI, preventing expected redundancy behavior. It does not explain the condition tested here.

Question 542

The team believes it has resolved this Junos issue: Equal candidate BGP routes are visible but no multipath forwarding entry is installed because eligibility or policy differs. Which observation best verifies the specific intended result?

  1. The selected BGP route reflects the intended higher LOCAL_PREF, and traceroute follows the approved exit.
  2. The routing and forwarding tables show the intended multiple next hops only for qualifying routes.
  3. The route is accepted only after the AS-path loop is removed, with stable forwarding.
  4. The previously hidden BGP prefix resolves its next hop and becomes an eligible route.

Explanation

Correct Answer

B:

The routing and forwarding tables show the intended multiple next hops only for qualifying routes. This checks the relevant result after compare BGP best-path and multipath eligibility conditions, then enable approved multipath behavior and validate forwarding.

Incorrect Answers

A:

“The selected BGP route reflects the intended higher LOCAL_PREF, and traceroute follows the approved exit” belongs to a separate Border Gateway Protocol (BGP) issue: an enterprise chooses a different BGP exit after import policy assigns a higher local preference to the backup path. It does not explain the condition tested here.

C:

“The route is accepted only after the AS-path loop is removed, with stable forwarding” belongs to a separate Border Gateway Protocol (BGP) issue: a carrier changes an upstream routing arrangement and a downstream Junos router detects its own AS in the advertised AS path. It does not explain the condition tested here.

D:

“The previously hidden BGP prefix resolves its next hop and becomes an eligible route” belongs to a separate Border Gateway Protocol (BGP) issue: a new IPv4 BGP prefix has a valid AS path but cannot become active after the IGP stops carrying its next-hop address. It does not explain the condition tested here.

Question 543

The team believes it has resolved this Junos issue: An OSPF export term filters routes based on the wrong protocol, so an intended static default is not originated. Which observation best verifies the specific intended result?

  1. The remote inet6.0 table learns the intended loopback and reachability testing succeeds.
  2. The peers advance to Full and successfully exchange database summaries after an approved aligned-MTU change.
  3. A designated external default appears at downstream routers without leaking unrelated static prefixes.
  4. The backbone receives the intended aggregate and routers can reach all included component subnets.

Explanation

Correct Answer

C:

A designated external default appears at downstream routers without leaking unrelated static prefixes. This checks the relevant result after inspect the active local default and export term conditions; match only the authorized static default source.

Incorrect Answers

A:

“The remote inet6.0 table learns the intended loopback and reachability testing succeeds” belongs to a separate Interior Gateway Protocols (IGPs) issue: OSPFv3 peering comes up but the desired IPv6 loopback is not in the routing database after a rollout. It does not explain the condition tested here.

B:

“The peers advance to Full and successfully exchange database summaries after an approved aligned-MTU change” belongs to a separate Interior Gateway Protocols (IGPs) issue: two EX distribution routers in OSPF area 0 remain in ExStart after a new transit VLAN uses inconsistent interface MTUs. It does not explain the condition tested here.

D:

“The backbone receives the intended aggregate and routers can reach all included component subnets” belongs to a separate Interior Gateway Protocols (IGPs) issue: an ABR stops advertising a branch prefix into the backbone after an OSPF area-range summary is configured incorrectly. It does not explain the condition tested here.

Question 544

A Junos enterprise team investigates this incident: An uplink becomes a region boundary unexpectedly after an administrator changes an MSTP configuration name on only one switch. Which technical explanation most directly identifies the cause or design principle?

  1. A private VLAN community allows permitted communication within its community; isolated behavior is stricter.
  2. Layer 2 protocol tunneling preserves selected customer control traffic across a service where ordinary data tagging is not enough.
  3. Private VLAN isolated ports are designed to limit lateral L2 communication while still reaching the permitted promiscuous uplink.
  4. MSTP region membership depends on compatible region parameters such as name, revision and VLAN-to-instance map.

Explanation

Correct Answer

D:

MSTP region membership depends on compatible region parameters such as name, revision and VLAN-to-instance map. The appropriate response is to compare complete region configuration on the peers and restore the approved shared MSTP region values.

Incorrect Answers

A:

“A private VLAN community allows permitted communication within its community; isolated behavior is stricter” belongs to a separate Ethernet Switching and Spanning Tree issue: a switch rollout splits a team that should communicate within one PVLAN community, while protecting it from another community. It does not explain the condition tested here.

B:

“Layer 2 protocol tunneling preserves selected customer control traffic across a service where ordinary data tagging is not enough” belongs to a separate Ethernet Switching and Spanning Tree issue: a private L2 service must extend customer control protocols, yet the provider fabric consumes or drops the customer's BPDUs. It does not explain the condition tested here.

C:

“Private VLAN isolated ports are designed to limit lateral L2 communication while still reaching the permitted promiscuous uplink” belongs to a separate Ethernet Switching and Spanning Tree issue: a shared guest access VLAN allows two untrusted hotel-room ports to communicate directly, violating the isolation design. It does not explain the condition tested here.

Question 545

The team believes it has resolved this Junos issue: An uplink meets long-term bandwidth policy but legitimate short bursts exceed the token-bucket allowance. Which observation best verifies the specific intended result?

  1. Only traffic meeting the defined match receives the intended queue and packet loss priority.
  2. Controlled traffic probes pass valid bursts without permitting sustained rate violations.
  3. Voice traffic receives the required scheduled service at the congested egress without starving other classes.
  4. Control-plane-related traffic receives the expected queue treatment under simulated load.

Explanation

Correct Answer

B:

Controlled traffic probes pass valid bursts without permitting sustained rate violations. This checks the relevant result after measure burst patterns and adjust the policer burst configuration within the authorized service contract.

Incorrect Answers

A:

“Only traffic meeting the defined match receives the intended queue and packet loss priority” belongs to a separate Class of Service (CoS) issue: a security function needs to classify a subset of traffic by source and destination criteria rather than trusted external markings. It does not explain the condition tested here.

C:

“Voice traffic receives the required scheduled service at the congested egress without starving other classes” belongs to a separate Class of Service (CoS) issue: a campus has configured forwarding classes and schedulers but one uplink carries all traffic through default service because association is missing. It does not explain the condition tested here.

D:

“Control-plane-related traffic receives the expected queue treatment under simulated load” belongs to a separate Class of Service (CoS) issue: a forwarding-class configuration sends critical routing packets to a queue used for bulk backups and adjacency stability degrades under load. It does not explain the condition tested here.

Question 546

A Junos enterprise team investigates this incident: An ingress classification filter for one terminal type inadvertently redirects other hosts using the same uplink. Which technical explanation most directly identifies the cause or design principle?

  1. MSTP maps VLANs into a smaller set of spanning-tree instances, providing scalable per-group path control.
  2. Spanning-tree edge-port assumptions are intended for non-switching endpoints, not redundant bridging connections.
  3. Q-in-Q requires deliberate tagging and untagging at service boundaries, with customer tags retained according to the handoff contract.
  4. Overbroad match conditions can cause unauthorized VLAN steering and affect both security and reachability.

Explanation

Correct Answer

D:

Overbroad match conditions can cause unauthorized VLAN steering and affect both security and reachability. The appropriate response is to narrow the match to approved selectors and compare affected packet counters and VLAN assignment.

Incorrect Answers

A:

“MSTP maps VLANs into a smaller set of spanning-tree instances, providing scalable per-group path control” belongs to a separate Ethernet Switching and Spanning Tree issue: a large campus places hundreds of VLANs in separate spanning-tree instances and reaches scale or CPU limits. It does not explain the condition tested here.

B:

“Spanning-tree edge-port assumptions are intended for non-switching endpoints, not redundant bridging connections” belongs to a separate Ethernet Switching and Spanning Tree issue: a redundant L2 topology creates a broadcast storm after an edge port connected to another switch is treated as an endpoint. It does not explain the condition tested here.

C:

“Q-in-Q requires deliberate tagging and untagging at service boundaries, with customer tags retained according to the handoff contract” belongs to a separate Ethernet Switching and Spanning Tree issue: a Q-in-Q service works across transport but the far-end access handoff presents unexpected double tags. It does not explain the condition tested here.

Question 547

For this case, select TWO complementary measures or outcome checks that directly resolve the problem: The local AS appears in a received external BGP AS_PATH and the route is rejected despite valid prefix reachability.

  1. Disable BGP AS-loop safeguards globally to accept any route repeating the local AS.
  2. Check the advertised AS sequence and correct the peering or routing design instead of bypassing loop checks.
  3. Accept every prefix inside the aggregate without evaluating the agreed maximum prefix length.
  4. The route is accepted only after the AS-path loop is removed, with stable forwarding.
  5. Point to a successful IPv4 traceroute as sufficient proof an IPv6 BGP next hop resolves.

Explanation

Correct Answers

B:

Check the advertised AS sequence and correct the peering or routing design instead of bypassing loop checks. This addresses the dependency that the default BGP AS-path loop check rejects routes containing the local autonomous system to prevent loops.

D:

The route is accepted only after the AS-path loop is removed, with stable forwarding. The specific steps required are to check the advertised AS sequence and correct the peering or routing design instead of bypassing loop checks.

Incorrect Answers

A:

“Disable BGP AS-loop safeguards globally to accept any route repeating the local AS” does not address the default BGP AS-path loop check rejects routes containing the local autonomous system to prevent loops.

C:

“Accept every prefix inside the aggregate without evaluating the agreed maximum prefix length” is an unsafe response to a different problem: an eBGP import policy unexpectedly accepts more-specific prefixes outside the approved customer allocation. It is not a valid fix here.

E:

“Point to a successful IPv4 traceroute as sufficient proof an IPv6 BGP next hop resolves” is an unsafe response to a different problem: an IPv6 BGP peer receives a route with an unreachable IPv6 next hop despite an otherwise valid inet6 unicast advertisement. It is not a valid fix here.

Question 548

For this case, select TWO complementary measures or outcome checks that directly resolve the problem: A shared guest access VLAN allows two untrusted hotel-room ports to communicate directly, violating the isolation design.

  1. Create an independent VSTP instance for every VLAN without checking platform scaling limits.
  2. Inspect primary and secondary private VLAN roles and port membership; restore approved isolated/community mappings.
  3. Two isolated tenant ports cannot reach each other but can reach the permitted gateway uplink.
  4. Treat ordinary VLAN membership as equivalent to isolation between every port inside that VLAN.
  5. Enable ordinary Q-in-Q tagging alone and assume every customer control protocol is necessarily tunneled.

Explanation

Correct Answers

B:

Inspect primary and secondary private VLAN roles and port membership; restore approved isolated/community mappings. This addresses the dependency that private VLAN isolated ports are designed to limit lateral L2 communication while still reaching the permitted promiscuous uplink.

C:

Two isolated tenant ports cannot reach each other but can reach the permitted gateway uplink. The specific steps required are to inspect primary and secondary private VLAN roles and port membership; restore approved isolated/community mappings.

Incorrect Answers

A:

“Create an independent VSTP instance for every VLAN without checking platform scaling limits” is an unsafe response to a different problem: a large campus places hundreds of VLANs in separate spanning-tree instances and reaches scale or CPU limits. It is not a valid fix here.

D:

“Treat ordinary VLAN membership as equivalent to isolation between every port inside that VLAN” does not address private VLAN isolated ports are designed to limit lateral L2 communication while still reaching the permitted promiscuous uplink.

E:

“Enable ordinary Q-in-Q tagging alone and assume every customer control protocol is necessarily tunneled” is an unsafe response to a different problem: an 802.1Q trunk carries customer data through a provider Ethernet segment but fails to forward the required spanning-tree control frames transparently. It is not a valid fix here.

Question 549

A Junos enterprise team investigates this incident: Packets with two different drop precedence values are treated as equally discardable during congestion. Which technical explanation most directly identifies the cause or design principle?

  1. Policing behavior depends on both committed rate and burst tolerance; a badly chosen burst parameter can penalize valid traffic.
  2. Junos egress rewrite rules map internal forwarding class and PLP back into supported packet header markings.
  3. CoS rewrite must reflect trusted classifications and intended forwarding policy, not arbitrary source markings.
  4. Packet loss priority differentiates drop susceptibility within a forwarding class and works with the configured queue/drop behavior.

Explanation

Correct Answer

D:

Packet loss priority differentiates drop susceptibility within a forwarding class and works with the configured queue/drop behavior. The appropriate response is to map the two packet categories to the intended PLP levels and verify drop-profile response.

Incorrect Answers

A:

“Policing behavior depends on both committed rate and burst tolerance; a badly chosen burst parameter can penalize valid traffic” belongs to a separate Class of Service (CoS) issue: a traffic policer drops small microbursts despite an acceptable average rate because its configured burst size is too tight. It does not explain the condition tested here.

B:

“Junos egress rewrite rules map internal forwarding class and PLP back into supported packet header markings” belongs to a separate Class of Service (CoS) issue: a boundary router classifies EF voice traffic correctly but sends outbound DSCP zero, so downstream devices undo priority handling. It does not explain the condition tested here.

C:

“CoS rewrite must reflect trusted classifications and intended forwarding policy, not arbitrary source markings” belongs to a separate Class of Service (CoS) issue: a branch egress rewriter incorrectly gives bulk backups the same DSCP as real-time voice. It does not explain the condition tested here.

Question 550

A Junos enterprise team investigates this incident: A branch wants to enforce a traffic contract on an incoming service flow yet applies policing to an unrelated egress path. Which technical explanation most directly identifies the cause or design principle?

  1. Drop profiles and weighted random early detection influence probabilistic discard thresholds as queue fill rises.
  2. Packet loss priority differentiates drop susceptibility within a forwarding class and works with the configured queue/drop behavior.
  3. A policer enforces traffic rate or burst limits and can discard or mark out-of-profile input; shaping buffers traffic for paced egress.
  4. Queue schedulers and buffer parameters influence service rate and delay/drop behavior at congested egress.

Explanation

Correct Answer

C:

A policer enforces traffic rate or burst limits and can discard or mark out-of-profile input; shaping buffers traffic for paced egress. The appropriate response is to apply a correctly scoped ingress policer with tested rate and burst values on the relevant flow.

Incorrect Answers

A:

“Drop profiles and weighted random early detection influence probabilistic discard thresholds as queue fill rises” belongs to a separate Class of Service (CoS) issue: a RED drop profile is applied too aggressively and drops packets even under moderate load. It does not explain the condition tested here.

B:

“Packet loss priority differentiates drop susceptibility within a forwarding class and works with the configured queue/drop behavior” belongs to a separate Class of Service (CoS) issue: packets with two different drop precedence values are treated as equally discardable during congestion. It does not explain the condition tested here.

D:

“Queue schedulers and buffer parameters influence service rate and delay/drop behavior at congested egress” belongs to a separate Class of Service (CoS) issue: video gets dropped under congestion despite spare capacity because its queue has a too-small delay buffer. It does not explain the condition tested here.

Enterprise Routing and Switching, Professional (JNCIP-ENT) (JN0-650) Practice Tests

UP

SPECIAL OFFER: GET 10% OFF

This is ONE TIME OFFER

ExamSnap Discount Offer
Enter Your Email Address to Receive Your 10% Off Discount Code

A confirmation link will be sent to this email address to verify your login. *We value your privacy. We will not rent or sell your email address.

Download Free Demo of VCE Exam Simulator

Experience Avanset VCE Exam Simulator for yourself.

Simply submit your e-mail address below to get started with our interactive software demo of your free trial.

Free Demo Limits: In the demo version you will be able to access only first 5 questions from exam.