100% Latest & Updated Juniper JN0-650 Practice Test Questions, Exam Dumps & Verified Answers!
30 Days Free Updates, Instant Download!
Question 560
The team believes it has resolved this Junos issue: A forwarding-class configuration sends critical routing packets to a queue used for bulk backups and adjacency stability degrades under load. Which observation best verifies the specific intended result?
- Drop counters and queue utilization follow the intended curve through increasing load.
- Packet captures show the intended DSCP or 802.1p fields on outbound voice, video and data traffic.
- Outgoing traffic conforms to the contracted rate with acceptable delay and fewer burst losses.
- Control-plane-related traffic receives the expected queue treatment under simulated load.
Explanation
Correct Answer
D:Control-plane-related traffic receives the expected queue treatment under simulated load. This checks the relevant result after review the forwarding class and queue map for control and data traffic and apply the intended assignments.
Incorrect Answers
A:“Drop counters and queue utilization follow the intended curve through increasing load” belongs to a separate Class of Service (CoS) issue: a RED drop profile is applied too aggressively and drops packets even under moderate load. It does not explain the condition tested here.
B:“Packet captures show the intended DSCP or 802.1p fields on outbound voice, video and data traffic” belongs to a separate Class of Service (CoS) issue: a provider handoff expects specific code-point markings yet a trunk rewrites every service class to default behavior. It does not explain the condition tested here.
C:“Outgoing traffic conforms to the contracted rate with acceptable delay and fewer burst losses” belongs to a separate Class of Service (CoS) issue: a WAN customer requires smooth outbound transmission but an ingress drop policer creates unnecessary burst loss. It does not explain the condition tested here.
Question 561
A network change is required for the following specific situation: A branch egress rewriter incorrectly gives bulk backups the same DSCP as real-time voice. Which corrective action is most appropriate?
- Associate the approved scheduler map with the correct egress interface and confirm class queue counters.
- Define a controlled rewrite map for each class and verify high-priority markings remain restricted.
- Review queue buffer and scheduler allocations against traffic measurements and apply a bounded adjustment.
- Measure burst patterns and adjust the policer burst configuration within the authorized service contract.
Explanation
Correct Answer
B:CoS rewrite must reflect trusted classifications and intended forwarding policy, not arbitrary source markings. Verify this by checking that only approved media streams leave with high-priority code points; backup traffic uses its designated mark.
Incorrect Answers
A:“Associate the approved scheduler map with the correct egress interface and confirm class queue counters” belongs to a separate Class of Service (CoS) issue: a low-latency queue is correctly classified but voice delays because its egress scheduler map is absent from the trunk. It does not explain the condition tested here.
C:“Review queue buffer and scheduler allocations against traffic measurements and apply a bounded adjustment” belongs to a separate Class of Service (CoS) issue: a backup traffic queue consumes too much buffer and latency-sensitive applications starve during peak bursts. It does not explain the condition tested here.
D:“Measure burst patterns and adjust the policer burst configuration within the authorized service contract” belongs to a separate Class of Service (CoS) issue: a traffic policer drops small microbursts despite an acceptable average rate because its configured burst size is too tight. It does not explain the condition tested here.
Question 562
To prevent recurrence of this precise networking failure, which practice should be adopted? A campus access interface keeps a compliant supplicant blocked while EAP requests never reach the expected authentication backend.
- Test captive-portal redirects, session expiry and post-login VLAN access in guest-network acceptance.
- Test fail-open/fail-closed decisions and platform-specific fallback capabilities in disaster recovery exercises.
- Monitor RADIUS reachability and validate each switch's authentication server profile during onboarding.
- Require inventory ownership and anomaly monitoring for MAC RADIUS exceptions.
Explanation
Correct Answer
C:Monitor RADIUS reachability and validate each switch's authentication server profile during onboarding. This guards against 802.1X authorization depends on the authenticator, supplicant and authentication-server conversation being correctly connected.
Incorrect Answers
A:“Test captive-portal redirects, session expiry and post-login VLAN access in guest-network acceptance” belongs to a separate Layer 2 Authentication and Access Control issue: guest users on an EX switch see no captive login page because browser HTTP redirects are not being applied on the intended VLAN. It does not explain the condition tested here.
B:“Test fail-open/fail-closed decisions and platform-specific fallback capabilities in disaster recovery exercises” belongs to a separate Layer 2 Authentication and Access Control issue: an enterprise fallback design accidentally places unauthenticated users into the production network when all RADIUS servers fail. It does not explain the condition tested here.
D:“Require inventory ownership and anomaly monitoring for MAC RADIUS exceptions” belongs to a separate Layer 2 Authentication and Access Control issue: a MAC RADIUS device changes its network adapter and can no longer authenticate because its registered identifier is stale. It does not explain the condition tested here.
Question 563
A Junos enterprise team investigates this incident: An emergency intercom can establish Ethernet link but loses power during activity because its PD class is not supported by that port. Which technical explanation most directly identifies the cause or design principle?
- Voice/data split depends on compatible VLAN membership, accepted 802.1Q tagging and endpoint network policy.
- Physical PoE delivery and negotiated device power requirements must match switch and endpoint capabilities.
- LLDP-MED location metadata can support telephony location services and must match actual switch-port placement.
- Base LLDP discovery and LLDP-MED telephony advertisement are distinct capabilities and may require separate enablement.
Explanation
Correct Answer
B:Physical PoE delivery and negotiated device power requirements must match switch and endpoint capabilities. The appropriate response is to inspect PoE class, per-port priority and available chassis budget, and move to a supported powered port if needed.
Incorrect Answers
A:“Voice/data split depends on compatible VLAN membership, accepted 802.1Q tagging and endpoint network policy” belongs to a separate IP Telephony Features issue: a phone-with-PC desk deployment lets the PC reach data services while the tagged voice stream is dropped by VLAN membership. It does not explain the condition tested here.
C:“LLDP-MED location metadata can support telephony location services and must match actual switch-port placement” belongs to a separate IP Telephony Features issue: an IP phone uses the wrong location information for emergency response after a switch move. It does not explain the condition tested here.
D:“Base LLDP discovery and LLDP-MED telephony advertisement are distinct capabilities and may require separate enablement” belongs to a separate IP Telephony Features issue: a powered endpoint detects a Junos switch but fails to negotiate voice prioritization because only ordinary LLDP is enabled. It does not explain the condition tested here.
Question 564
Which suggested shortcut would be especially unsafe for this exact situation? A replacement router has IPv6 OSPFv3 adjacency yet does not advertise the loopback subnet required for monitoring.
- Reserve router IDs from a centrally managed inventory before zero-touch provisioning.
- Record both LSDB presence and local RIB installation in OSPF troubleshooting runbooks.
- Restart the entire OSPFv2 process and assume this fixes a missing OSPFv3 loopback.
- Make physical and logical MTU parity part of transit-link commissioning and review.
Explanation
Correct Answer
C:The tempting alternative fails because an established OSPFv3 neighbor does not prove every desired IPv6 interface prefix is included in the protocol topology. The supported action is to inspect IPv6 interface addresses and OSPFv3 interface participation, then add the intended loopback advertisement within policy.
Incorrect Answers
A:That prevention measure relates to a router's OSPF neighbor restarts repeatedly because duplicate router IDs were assigned to different routing nodes.; it is not the unsafe shortcut described here.
B:That prevention measure relates to an OSPF import policy hides external routes on one device while neighbors retain them, confusing the team reviewing reachability.; it is not the unsafe shortcut described here.
D:That prevention measure relates to a core-router replacement leaves an OSPF adjacency stuck exchanging database descriptions, while the two ends have different Layer 3 MTUs.; it is not the unsafe shortcut described here.
Question 565
Which suggested shortcut would be especially unsafe for this exact situation? An ABR stops advertising a branch prefix into the backbone after an OSPF area-range summary is configured incorrectly.
- Include a checklist of advertised IPv6 service and loopback addresses in OSPFv3 acceptance.
- Document expected external metrics and run primary/backup failover tests during policy changes.
- Verify both protocol RIB candidates and active next-hop selection in dual-stack change tests.
- Advertise an arbitrary wide aggregate that includes unrelated networks to make the missing route disappear.
Explanation
Correct Answer
D:The tempting alternative fails because area summarization scope must correctly cover the intended component networks; the wrong range can suppress or misrepresent reachability. The supported action is to verify the aggregate range, component prefixes and ABR advertisements, then correct the summary policy to the approved address plan.
Incorrect Answers
A:That prevention measure relates to OSPFv3 peering comes up but the desired IPv6 loopback is not in the routing database after a rollout.; it is not the unsafe shortcut described here.
B:That prevention measure relates to a branch receives two external paths with different metric-type assumptions after a policy change and prefers the wrong exit.; it is not the unsafe shortcut described here.
C:That prevention measure relates to an IPv6 route learned through OSPFv3 is absent from the forwarding table because a more preferred static route covers the same prefix.; it is not the unsafe shortcut described here.
Question 566
The team believes it has resolved this Junos issue: An eBGP import policy unexpectedly accepts more-specific prefixes outside the approved customer allocation. Which observation best verifies the specific intended result?
- The IPv6 BGP route becomes eligible and forwards over an IPv6-resolvable next hop.
- The previously hidden BGP prefix resolves its next hop and becomes an eligible route.
- Allowed customer prefixes are received while unauthorized longer prefixes are absent from accepted routes.
- The expected IPv6 prefix is received in inet6.0 while IPv4 route exchange remains unchanged.
Explanation
Correct Answer
C:Allowed customer prefixes are received while unauthorized longer prefixes are absent from accepted routes. This checks the relevant result after use precise route-filter match conditions and explicit rejection of unauthorized more-specific routes.
Incorrect Answers
A:“The IPv6 BGP route becomes eligible and forwards over an IPv6-resolvable next hop” belongs to a separate Border Gateway Protocol (BGP) issue: an IPv6 BGP peer receives a route with an unreachable IPv6 next hop despite an otherwise valid inet6 unicast advertisement. It does not explain the condition tested here.
B:“The previously hidden BGP prefix resolves its next hop and becomes an eligible route” belongs to a separate Border Gateway Protocol (BGP) issue: an iBGP route is received from a reflector but hidden because its third-party next hop is unreachable in inet.0. It does not explain the condition tested here.
D:“The expected IPv6 prefix is received in inet6.0 while IPv4 route exchange remains unchanged” belongs to a separate Border Gateway Protocol (BGP) issue: BGP peers exchange IPv4 NLRI correctly but a planned IPv6 customer route never appears in inet6.0. It does not explain the condition tested here.
Question 567
Which suggested shortcut would be especially unsafe for this exact situation? A legacy printer can join after MAC authentication yet is allowed to reach sensitive management segments.
- Separate EAP silence, reject and timeout counters in authentication operational monitoring.
- Give MAC-authenticated devices the same unrestricted access as strongly authenticated employees.
- Classify interactive and headless endpoint requirements before choosing the access method.
- Include downstream device count and authentication method in desk-port templates.
Explanation
Correct Answer
B:The tempting alternative fails because MAC authorization should couple weak identity to constrained role-based network access, not just a successful RADIUS decision. The supported action is to assign the authenticated device to the authorized restricted network profile and verify effective VLAN/filter.
Incorrect Answers
A:That prevention measure relates to a RADIUS server reports no Access-Request for a silent legacy terminal, while switch timers show no EAP response.; it is not the unsafe shortcut described here.
C:That prevention measure relates to a captive portal requirement is applied to a headless barcode scanner that has no web browser to follow its redirect.; it is not the unsafe shortcut described here.
D:That prevention measure relates to an access port is placed in single-supplicant mode but a desk phone and PC must authenticate separately behind the same port.; it is not the unsafe shortcut described here.
Question 568
For this case, select TWO complementary measures or outcome checks that directly resolve the problem: Guest users on an EX switch see no captive login page because browser HTTP redirects are not being applied on the intended VLAN.
- Add a static DNS record and assume it substitutes for captive-portal authentication and authorization.
- The user sees a valid login prompt and receives only the approved post-login policy.
- Inspect switch captive portal attachment, redirect reachability and completion flow for a test guest.
- Rotate every user's password without checking whether the endpoint sent an EAP response at all.
- Give MAC-authenticated devices the same unrestricted access as strongly authenticated employees.
Explanation
Correct Answers
B:The user sees a valid login prompt and receives only the approved post-login policy. The specific steps required are to inspect switch captive portal attachment, redirect reachability and completion flow for a test guest.
C:Inspect switch captive portal attachment, redirect reachability and completion flow for a test guest. This addresses the dependency that captive portal requires a supported browser interception and authentication-to-authorization sequence.
Incorrect Answers
A:“Add a static DNS record and assume it substitutes for captive-portal authentication and authorization” does not address captive portal requires a supported browser interception and authentication-to-authorization sequence.
D:“Rotate every user's password without checking whether the endpoint sent an EAP response at all” is an unsafe response to a different problem: a RADIUS server reports no Access-Request for a silent legacy terminal, while switch timers show no EAP response. It is not a valid fix here.
E:“Give MAC-authenticated devices the same unrestricted access as strongly authenticated employees” is an unsafe response to a different problem: a legacy printer can join after MAC authentication yet is allowed to reach sensitive management segments. It is not a valid fix here.
Question 569
For this case, select TWO complementary measures or outcome checks that directly resolve the problem: A WAN customer requires smooth outbound transmission but an ingress drop policer creates unnecessary burst loss.
- Outgoing traffic conforms to the contracted rate with acceptable delay and fewer burst losses.
- Assume any policing rule provides the same paced, buffered behavior as egress shaping.
- Increase every queue buffer without considering latency, memory or scheduling priority.
- Let all untrusted clients self-select expedited forwarding marks without verification.
- Configure supported egress shaping at the bottleneck and verify throughput and queue behavior.
Explanation
Correct Answers
A:Outgoing traffic conforms to the contracted rate with acceptable delay and fewer burst losses. The specific steps required are to configure supported egress shaping at the bottleneck and verify throughput and queue behavior.
E:Configure supported egress shaping at the bottleneck and verify throughput and queue behavior. This addresses the dependency that shaping buffers and schedules outgoing traffic to a rate, unlike policing which marks or discards traffic exceeding a contract.
Incorrect Answers
B:“Assume any policing rule provides the same paced, buffered behavior as egress shaping” does not address shaping buffers and schedules outgoing traffic to a rate, unlike policing which marks or discards traffic exceeding a contract.
C:“Increase every queue buffer without considering latency, memory or scheduling priority” is an unsafe response to a different problem: video gets dropped under congestion despite spare capacity because its queue has a too-small delay buffer. It is not a valid fix here.
D:“Let all untrusted clients self-select expedited forwarding marks without verification” is an unsafe response to a different problem: a branch egress rewriter incorrectly gives bulk backups the same DSCP as real-time voice. It is not a valid fix here.
Question 570
For this case, select TWO complementary measures or outcome checks that directly resolve the problem: A campus extension carries the right VXLAN outer header but directs frames to the wrong tenant bridge domain due to bad VNI mapping.
- Assume a data-plane VXLAN tunnel automatically updates every remote leaf's EVPN MAC reachability without Type 2 control-plane exchange.
- Read a Type 1 Ethernet auto-discovery update as the definitive source of every individual host MAC address.
- Compare VLAN-to-VNI and bridge-domain assignments on all leafs and correct them against the approved tenant map.
- Tenant traffic reaches only its intended remote bridge domain and overlapping VLAN IDs remain isolated.
- Reuse one VNI for unrelated tenants and assume local VLAN names alone prevent overlay mixing.
Explanation
Correct Answers
C:Compare VLAN-to-VNI and bridge-domain assignments on all leafs and correct them against the approved tenant map. This addresses the dependency that VNI and bridge-domain mapping determines tenant overlay segmentation; misaligned mappings can misdeliver or isolate traffic.
D:Tenant traffic reaches only its intended remote bridge domain and overlapping VLAN IDs remain isolated. The specific steps required are to compare VLAN-to-VNI and bridge-domain assignments on all leafs and correct them against the approved tenant map.
Incorrect Answers
A:“Assume a data-plane VXLAN tunnel automatically updates every remote leaf's EVPN MAC reachability without Type 2 control-plane exchange” is an unsafe response to a different problem: a new endpoint MAC is learned at a remote VTEP but never reaches the receiving leaf's EVPN control-plane table. It is not a valid fix here.
B:“Read a Type 1 Ethernet auto-discovery update as the definitive source of every individual host MAC address” is an unsafe response to a different problem: a troubleshooting team expects EVPN Ethernet auto-discovery route Type 1 to carry all host MAC/IP bindings. It is not a valid fix here.
E:“Reuse one VNI for unrelated tenants and assume local VLAN names alone prevent overlay mixing” does not address VNI and bridge-domain mapping determines tenant overlay segmentation; misaligned mappings can misdeliver or isolate traffic.
Enterprise Routing and Switching, Professional (JNCIP-ENT) (JN0-650) Practice Tests