100% Latest & Updated Juniper JN0-650 Practice Test Questions, Exam Dumps & Verified Answers!
30 Days Free Updates, Instant Download!
Question 550
A Junos enterprise team investigates this incident: A branch wants to enforce a traffic contract on an incoming service flow yet applies policing to an unrelated egress path. Which technical explanation most directly identifies the cause or design principle?
- Drop profiles and weighted random early detection influence probabilistic discard thresholds as queue fill rises.
- Packet loss priority differentiates drop susceptibility within a forwarding class and works with the configured queue/drop behavior.
- A policer enforces traffic rate or burst limits and can discard or mark out-of-profile input; shaping buffers traffic for paced egress.
- Queue schedulers and buffer parameters influence service rate and delay/drop behavior at congested egress.
Explanation
Correct Answer
C:A policer enforces traffic rate or burst limits and can discard or mark out-of-profile input; shaping buffers traffic for paced egress. The appropriate response is to apply a correctly scoped ingress policer with tested rate and burst values on the relevant flow.
Incorrect Answers
A:“Drop profiles and weighted random early detection influence probabilistic discard thresholds as queue fill rises” belongs to a separate Class of Service (CoS) issue: a RED drop profile is applied too aggressively and drops packets even under moderate load. It does not explain the condition tested here.
B:“Packet loss priority differentiates drop susceptibility within a forwarding class and works with the configured queue/drop behavior” belongs to a separate Class of Service (CoS) issue: packets with two different drop precedence values are treated as equally discardable during congestion. It does not explain the condition tested here.
D:“Queue schedulers and buffer parameters influence service rate and delay/drop behavior at congested egress” belongs to a separate Class of Service (CoS) issue: video gets dropped under congestion despite spare capacity because its queue has a too-small delay buffer. It does not explain the condition tested here.
Question 551
A Junos enterprise team investigates this incident: An iBGP egress advertisement forwards a transit next hop that branch routers cannot resolve, creating traffic blackholes. Which technical explanation most directly identifies the cause or design principle?
- A reachable BGP peering session does not itself make a third-party route next hop recursively resolvable.
- Routing-policy term order and terminal actions determine whether later conditions are evaluated.
- iBGP-learned routes are not freely re-advertised to all iBGP neighbors without appropriate reflection or topology.
- BGP typically prefers a larger LOCAL_PREF among otherwise eligible candidates before later path-selection tie breakers.
Explanation
Correct Answer
A:A reachable BGP peering session does not itself make a third-party route next hop recursively resolvable. The appropriate response is to inspect next-hop attributes and IGP reachability; deliberately choose appropriate next-hop-self policy or add valid underlay routes.
Incorrect Answers
B:“Routing-policy term order and terminal actions determine whether later conditions are evaluated” belongs to a separate Border Gateway Protocol (BGP) issue: a route with a permissive policy term is accepted before a later deny term can block it. It does not explain the condition tested here.
C:“iBGP-learned routes are not freely re-advertised to all iBGP neighbors without appropriate reflection or topology” belongs to a separate Border Gateway Protocol (BGP) issue: a full-mesh iBGP design is converted to route reflection but one peer is treated as an ordinary nonclient and route propagation fails. It does not explain the condition tested here.
D:“BGP typically prefers a larger LOCAL_PREF among otherwise eligible candidates before later path-selection tie breakers” belongs to a separate Border Gateway Protocol (BGP) issue: an enterprise chooses a different BGP exit after import policy assigns a higher local preference to the backup path. It does not explain the condition tested here.
Question 552
To prevent recurrence of this precise networking failure, which practice should be adopted? An ABR starts leaking a management static route into the enterprise IGP after a permissive export term was introduced.
- Validate active logical-interface mappings and IPv6 adjacency as part of change acceptance.
- Validate per-interface OSPF area assignments from an approved topology matrix before commit.
- Use named prefix lists and regression tests for approved and denied redistribution cases.
- Reserve router IDs from a centrally managed inventory before zero-touch provisioning.
Explanation
Correct Answer
C:Use named prefix lists and regression tests for approved and denied redistribution cases. This guards against unrestricted OSPF export policy can originate unintended external routes, changing enterprise reachability.
Incorrect Answers
A:“Validate active logical-interface mappings and IPv6 adjacency as part of change acceptance” belongs to a separate Interior Gateway Protocols (IGPs) issue: a new IPv6 peering uses OSPFv3 on a retired VLAN unit rather than the active routed transit interface. It does not explain the condition tested here.
B:“Validate per-interface OSPF area assignments from an approved topology matrix before commit” belongs to a separate Interior Gateway Protocols (IGPs) issue: a campus OSPF interface is accidentally placed in area 0 while its neighbor advertises a nonbackbone area, preventing a Full adjacency. It does not explain the condition tested here.
D:“Reserve router IDs from a centrally managed inventory before zero-touch provisioning” belongs to a separate Interior Gateway Protocols (IGPs) issue: two newly deployed distribution switches report identical OSPF router IDs, causing inconsistent LSAs in the area. It does not explain the condition tested here.
Question 553
Which suggested shortcut would be especially unsafe for this exact situation? A visitor portal redirects browser traffic but never releases the user to the approved network after authentication.
- Review authorization policies for MAC endpoints against a least-privilege access matrix.
- Add a static DNS record and assume it substitutes for captive-portal authentication and authorization.
- Test multi-method paths including success, reject and timeout cases before deployment.
- Monitor RADIUS reachability and validate each switch's authentication server profile during onboarding.
Explanation
Correct Answer
B:The tempting alternative fails because captive portal requires a supported browser interception and authentication-to-authorization sequence. The supported action is to inspect switch captive portal attachment, redirect reachability and completion flow for a test guest.
Incorrect Answers
A:That prevention measure relates to a legacy printer can join after MAC authentication yet is allowed to reach sensitive management segments.; it is not the unsafe shortcut described here.
C:That prevention measure relates to two authentication methods are enabled on a shared switch port but fallback ordering bypasses a successful 802.1X result.; it is not the unsafe shortcut described here.
D:That prevention measure relates to a campus access interface keeps a compliant supplicant blocked while EAP requests never reach the expected authentication backend.; it is not the unsafe shortcut described here.
Question 554
A Junos enterprise team investigates this incident: An Anycast RP design uses two RP addresses that do not share the intended anycast identity, producing inconsistent joins. Which technical explanation most directly identifies the cause or design principle?
- IP multicast replicates streams at forwarding branches instead of requiring a separate source-to-receiver unicast stream.
- Source-specific multicast uses (S,G) membership semantics and generally avoids ASM rendezvous-point discovery for that flow.
- Anycast RP aims for a stable RP address with multiple nodes; consistent source discovery and RP coordination are essential to the chosen architecture.
- Junos multicast RPF may use a dedicated routing table, so the effective RPF path must be inspected, not guessed from unicast traffic.
Explanation
Correct Answer
C:Anycast RP aims for a stable RP address with multiple nodes; consistent source discovery and RP coordination are essential to the chosen architecture. The appropriate response is to verify anycast RP address and supported source synchronization method across the participating RP nodes.
Incorrect Answers
A:“IP multicast replicates streams at forwarding branches instead of requiring a separate source-to-receiver unicast stream” belongs to a separate IP Multicast issue: a trading-data sender needs to serve many local subscribers, but each listener receives its own redundant copy over the backbone. It does not explain the condition tested here.
B:“Source-specific multicast uses (S,G) membership semantics and generally avoids ASM rendezvous-point discovery for that flow” belongs to a separate IP Multicast issue: a controlled one-source data feed requires group membership constrained by both source and group, not arbitrary senders. It does not explain the condition tested here.
D:“Junos multicast RPF may use a dedicated routing table, so the effective RPF path must be inspected, not guessed from unicast traffic” belongs to a separate IP Multicast issue: a multicast team changes unicast routing yet an engineered multicast RPF table still points to an obsolete next hop. It does not explain the condition tested here.
Question 555
Which suggested shortcut would be especially unsafe for this exact situation? An IPv6-only branch has OSPFv3 Hellos on the wrong logical unit after interface renumbering, so no IPv6 routes appear.
- Configure IPv4 OSPFv2 alone and expect it to populate IPv6 unicast routes automatically.
- Make physical and logical MTU parity part of transit-link commissioning and review.
- Reserve router IDs from a centrally managed inventory before zero-touch provisioning.
- Specify preferred OSPF DR candidates on shared transit segments and account for non-preemptive elections.
Explanation
Correct Answer
A:The tempting alternative fails because OSPFv3 adjacency depends on participating interfaces and valid IPv6 link-local neighbor communication. The supported action is to move OSPFv3 participation to the correct active interface and verify neighbor and IPv6 RIB state.
Incorrect Answers
B:That prevention measure relates to a core-router replacement leaves an OSPF adjacency stuck exchanging database descriptions, while the two ends have different Layer 3 MTUs.; it is not the unsafe shortcut described here.
C:That prevention measure relates to two newly deployed distribution switches report identical OSPF router IDs, causing inconsistent LSAs in the area.; it is not the unsafe shortcut described here.
D:That prevention measure relates to an aggregation broadcast VLAN has a DR/BDR placement that conflicts with the approved design after a maintenance reboot.; it is not the unsafe shortcut described here.
Question 556
The team believes it has resolved this Junos issue: A Q-in-Q service works across transport but the far-end access handoff presents unexpected double tags. Which observation best verifies the specific intended result?
- A packet capture shows the contracted customer tag or untagged frame at the endpoint.
- Matching test traffic enters the quarantine VLAN while ordinary traffic stays in the expected VLAN.
- Selected voice and data VLANs use the approved active links without loops.
- Community members can communicate as intended while cross-community access remains blocked.
Explanation
Correct Answer
A:A packet capture shows the contracted customer tag or untagged frame at the endpoint. This checks the relevant result after inspect the ingress/egress tag-processing configuration and correct the service handoff encapsulation.
Incorrect Answers
B:“Matching test traffic enters the quarantine VLAN while ordinary traffic stays in the expected VLAN” belongs to a separate Ethernet Switching and Spanning Tree issue: a campus onboarding policy puts cameras on the normal data VLAN even though a targeted filter-based VLAN should steer them. It does not explain the condition tested here.
C:“Selected voice and data VLANs use the approved active links without loops” belongs to a separate Ethernet Switching and Spanning Tree issue: a VSTP network intended to send voice and data VLANs over different active paths instead blocks both on the same uplink. It does not explain the condition tested here.
D:“Community members can communicate as intended while cross-community access remains blocked” belongs to a separate Ethernet Switching and Spanning Tree issue: members of the same trusted workgroup are accidentally placed in isolated rather than community PVLAN ports and lose peer communication. It does not explain the condition tested here.
Question 557
A network change is required for the following specific situation: A filter-based VLAN security design uses a rule that catches too many packets and steers legitimate devices into quarantine. Which corrective action is most appropriate?
- Narrow the match to approved selectors and compare affected packet counters and VLAN assignment.
- Compare bridge priority, VLAN or MSTI root and port path costs against design; adjust deliberately.
- Inspect registration state and remove stale VLAN membership while preserving necessary registrations.
- Compare complete region configuration on the peers and restore the approved shared MSTP region values.
Explanation
Correct Answer
A:Overbroad match conditions can cause unauthorized VLAN steering and affect both security and reachability. Verify this by checking that only the intended endpoint class is moved while nonmatching hosts retain correct access.
Incorrect Answers
B:“Compare bridge priority, VLAN or MSTI root and port path costs against design; adjust deliberately” belongs to a separate Ethernet Switching and Spanning Tree issue: a switch with an unexpectedly low bridge priority becomes MSTP root and redirects aggregation traffic through an access closet. It does not explain the condition tested here.
C:“Inspect registration state and remove stale VLAN membership while preserving necessary registrations” belongs to a separate Ethernet Switching and Spanning Tree issue: a dynamic VLAN is removed from one edge but stale MVRP registration keeps an unused VLAN active downstream. It does not explain the condition tested here.
D:“Compare complete region configuration on the peers and restore the approved shared MSTP region values” belongs to a separate Ethernet Switching and Spanning Tree issue: an uplink becomes a region boundary unexpectedly after an administrator changes an MSTP configuration name on only one switch. It does not explain the condition tested here.
Question 558
A Junos enterprise team investigates this incident: Two authentication methods are enabled on a shared switch port but fallback ordering bypasses a successful 802.1X result. Which technical explanation most directly identifies the cause or design principle?
- MAC authorization should couple weak identity to constrained role-based network access, not just a successful RADIUS decision.
- Supplicant absence is a distinct failure from an invalid credential or unreachable authentication server.
- Authentication-method precedence and session state can affect which effective authorization takes hold.
- 802.1X host-mode selection affects whether multiple downstream devices can be independently authenticated and authorized.
Explanation
Correct Answer
C:Authentication-method precedence and session state can affect which effective authorization takes hold. The appropriate response is to inspect supported method sequencing and enforce the approved 802.1X-first and MAC-exception behavior.
Incorrect Answers
A:“MAC authorization should couple weak identity to constrained role-based network access, not just a successful RADIUS decision” belongs to a separate Layer 2 Authentication and Access Control issue: a legacy printer can join after MAC authentication yet is allowed to reach sensitive management segments. It does not explain the condition tested here.
B:“Supplicant absence is a distinct failure from an invalid credential or unreachable authentication server” belongs to a separate Layer 2 Authentication and Access Control issue: a RADIUS server reports no Access-Request for a silent legacy terminal, while switch timers show no EAP response. It does not explain the condition tested here.
D:“802.1X host-mode selection affects whether multiple downstream devices can be independently authenticated and authorized” belongs to a separate Layer 2 Authentication and Access Control issue: a telephony desk requires multiple authenticated identities while the switch policy allows only one active supplicant. It does not explain the condition tested here.
Question 559
For this case, select TWO complementary measures or outcome checks that directly resolve the problem: A MAC RADIUS policy authenticates a known camera but applies the broad employee VLAN instead of a camera-only network.
- Assign the authenticated device to the authorized restricted network profile and verify effective VLAN/filter.
- Assume any RADIUS Access-Accept forces a requested dynamic VLAN on every Junos switch variant.
- Give MAC-authenticated devices the same unrestricted access as strongly authenticated employees.
- The known device reaches only permitted destinations and cannot reach employee or management resources.
- Rotate every user's password without checking whether the endpoint sent an EAP response at all.
Explanation
Correct Answers
A:Assign the authenticated device to the authorized restricted network profile and verify effective VLAN/filter. This addresses the dependency that MAC authorization should couple weak identity to constrained role-based network access, not just a successful RADIUS decision.
D:The known device reaches only permitted destinations and cannot reach employee or management resources. The specific steps required are to assign the authenticated device to the authorized restricted network profile and verify effective VLAN/filter.
Incorrect Answers
B:“Assume any RADIUS Access-Accept forces a requested dynamic VLAN on every Junos switch variant” is an unsafe response to a different problem: an EAP-compliant endpoint authenticates while the required policy attribute is absent or ignored in switch port authorization. It is not a valid fix here.
C:“Give MAC-authenticated devices the same unrestricted access as strongly authenticated employees” does not address MAC authorization should couple weak identity to constrained role-based network access, not just a successful RADIUS decision.
E:“Rotate every user's password without checking whether the endpoint sent an EAP response at all” is an unsafe response to a different problem: a switch logs EAP timeout while the endpoint has no 802.1X supplicant, yet the operator rotates valid RADIUS passwords repeatedly. It is not a valid fix here.
Question 560
The team believes it has resolved this Junos issue: A forwarding-class configuration sends critical routing packets to a queue used for bulk backups and adjacency stability degrades under load. Which observation best verifies the specific intended result?
- Drop counters and queue utilization follow the intended curve through increasing load.
- Packet captures show the intended DSCP or 802.1p fields on outbound voice, video and data traffic.
- Outgoing traffic conforms to the contracted rate with acceptable delay and fewer burst losses.
- Control-plane-related traffic receives the expected queue treatment under simulated load.
Explanation
Correct Answer
D:Control-plane-related traffic receives the expected queue treatment under simulated load. This checks the relevant result after review the forwarding class and queue map for control and data traffic and apply the intended assignments.
Incorrect Answers
A:“Drop counters and queue utilization follow the intended curve through increasing load” belongs to a separate Class of Service (CoS) issue: a RED drop profile is applied too aggressively and drops packets even under moderate load. It does not explain the condition tested here.
B:“Packet captures show the intended DSCP or 802.1p fields on outbound voice, video and data traffic” belongs to a separate Class of Service (CoS) issue: a provider handoff expects specific code-point markings yet a trunk rewrites every service class to default behavior. It does not explain the condition tested here.
C:“Outgoing traffic conforms to the contracted rate with acceptable delay and fewer burst losses” belongs to a separate Class of Service (CoS) issue: a WAN customer requires smooth outbound transmission but an ingress drop policer creates unnecessary burst loss. It does not explain the condition tested here.
Enterprise Routing and Switching, Professional (JNCIP-ENT) (JN0-650) Practice Tests