Juniper JN0-650 Exam Dumps, Practice Test Questions

100% Latest & Updated Juniper JN0-650 Practice Test Questions, Exam Dumps & Verified Answers!
30 Days Free Updates, Instant Download!

Juniper JN0-650  Premium File
$54.99
$49.99

JN0-650 Premium File

  • Premium File: 107 Questions & Answers. Last update: Nov 7, 2026
  • Latest Questions
  • 100% Accurate Answers
  • Fast Exam Updates

JN0-650 Premium File

Juniper JN0-650  Premium File
  • Premium File: 107 Questions & Answers. Last update: Nov 7, 2026
  • Latest Questions
  • 100% Accurate Answers
  • Fast Exam Updates
$54.99
$49.99

Juniper JN0-650 Practice Test 60

Question 590

A network change is required for the following specific situation: An aggregation broadcast VLAN has a DR/BDR placement that conflicts with the approved design after a maintenance reboot. Which corrective action is most appropriate?

  1. Check IPv6 link-local addressing, OSPFv3 neighbor state and relevant ICMPv6 connectivity on the actual interface.
  2. Inspect network type, interface priority and existing election state, then plan a controlled DR/BDR change.
  3. Inspect IPv6 interface addresses and OSPFv3 interface participation, then add the intended loopback advertisement within policy.
  4. Compare LSDB advertisements with local route policy and inet.0 state; correct the intended import filter.

Explanation

Correct Answer

B:

DR/BDR elections on OSPF broadcast networks affect LSA exchange and can be influenced by priority. Verify this by checking that neighbor states and DR/BDR assignments match the approved design following a managed election.

Incorrect Answers

A:

“Check IPv6 link-local addressing, OSPFv3 neighbor state and relevant ICMPv6 connectivity on the actual interface” belongs to a separate Interior Gateway Protocols (IGPs) issue: an OSPFv3 adjacency on a dual-stack campus changes state because engineers treat IPv4 interface reachability as proof of IPv6 control-plane health. It does not explain the condition tested here.

C:

“Inspect IPv6 interface addresses and OSPFv3 interface participation, then add the intended loopback advertisement within policy” belongs to a separate Interior Gateway Protocols (IGPs) issue: a replacement router has IPv6 OSPFv3 adjacency yet does not advertise the loopback subnet required for monitoring. It does not explain the condition tested here.

D:

“Compare LSDB advertisements with local route policy and inet.0 state; correct the intended import filter” belongs to a separate Interior Gateway Protocols (IGPs) issue: a core node shows a missing route while remote LSDBs include the corresponding external LSA after a local policy change. It does not explain the condition tested here.

Question 591

For this case, select TWO complementary measures or outcome checks that directly resolve the problem: A policy-based VLAN filter moves matching device traffic to a quarantine VLAN but a rule fails to match the intended MAC or packet fields.

  1. Create an independent VSTP instance for every VLAN without checking platform scaling limits.
  2. Matching test traffic enters the quarantine VLAN while ordinary traffic stays in the expected VLAN.
  3. Assume the physically fastest switch is always elected as spanning-tree root irrespective of priority.
  4. Inspect match conditions and attachment point, then change the approved filter-based VLAN steering rule.
  5. Assume naming a quarantine VLAN automatically steers matching traffic without an applied filter.

Explanation

Correct Answers

B:

Matching test traffic enters the quarantine VLAN while ordinary traffic stays in the expected VLAN. The specific steps required are to inspect match conditions and attachment point, then change the approved filter-based VLAN steering rule.

D:

Inspect match conditions and attachment point, then change the approved filter-based VLAN steering rule. This addresses the dependency that filter-based VLAN assignment depends on correctly matching the selected traffic and applying the filter at the right ingress point.

Incorrect Answers

A:

“Create an independent VSTP instance for every VLAN without checking platform scaling limits” is an unsafe response to a different problem: a network uses one VLAN-wide topology but wants two forwarding trees for different groups without an instance for every VLAN. It is not a valid fix here.

C:

“Assume the physically fastest switch is always elected as spanning-tree root irrespective of priority” is an unsafe response to a different problem: a switch with an unexpectedly low bridge priority becomes MSTP root and redirects aggregation traffic through an access closet. It is not a valid fix here.

E:

“Assume naming a quarantine VLAN automatically steers matching traffic without an applied filter” does not address filter-based VLAN assignment depends on correctly matching the selected traffic and applying the filter at the right ingress point.

Question 592

A network change is required for the following specific situation: A PIM sparse-mode segment cannot maintain neighbor state because PIM is configured on the wrong routed interface. Which corrective action is most appropriate?

  1. Compare source-route preference with actual multicast ingress and restore a consistent authorized upstream path.
  2. Configure group-aware multicast routing policy and boundary filters at intended exits, then verify forwarding.
  3. Inspect multicast RPF state and the routing table used for source resolution, then correct the underlay or allowed RPF selection.
  4. Enable PIM on the approved routed VLAN interface and inspect neighbor and join state.

Explanation

Correct Answer

D:

PIM routing adjacencies require appropriate protocol participation on the actual routed interfaces used for the distribution tree. Verify this by checking that the required PIM neighbors appear and downstream join state tracks active interested receivers.

Incorrect Answers

A:

“Compare source-route preference with actual multicast ingress and restore a consistent authorized upstream path” belongs to a separate IP Multicast issue: a stream uses asymmetric unicast routing; multicast forwarding fails intermittently although individual host routes work. It does not explain the condition tested here.

B:

“Configure group-aware multicast routing policy and boundary filters at intended exits, then verify forwarding” belongs to a separate IP Multicast issue: a financial multicast feed intended for one campus crosses the WAN because no boundary controls are configured. It does not explain the condition tested here.

C:

“Inspect multicast RPF state and the routing table used for source resolution, then correct the underlay or allowed RPF selection” belongs to a separate IP Multicast issue: multicast packets arrive on the wrong uplink after unicast routing changes and are dropped by the campus core. It does not explain the condition tested here.

Question 593

The team believes it has resolved this Junos issue: A router prefers a longer AS path when a higher LOCAL_PREF makes that route win, surprising the transit team. Which observation best verifies the specific intended result?

  1. The routing and forwarding tables show the intended multiple next hops only for qualifying routes.
  2. The downstream client learns approved prefixes and cluster-loop checks remain operational.
  3. After policy correction, chosen path and attribute ordering match documented routing intent.
  4. The desired received prefix is accepted and active while intentionally blocked prefixes stay rejected.

Explanation

Correct Answer

C:

After policy correction, chosen path and attribute ordering match documented routing intent. This checks the relevant result after examine both attributes in the received route detail and update the explicit routing policy rather than guessing.

Incorrect Answers

A:

“The routing and forwarding tables show the intended multiple next hops only for qualifying routes” belongs to a separate Border Gateway Protocol (BGP) issue: two eBGP sessions over different transports are expected to provide ECMP but only one forwarding next hop appears. It does not explain the condition tested here.

B:

“The downstream client learns approved prefixes and cluster-loop checks remain operational” belongs to a separate Border Gateway Protocol (BGP) issue: a full-mesh iBGP design is converted to route reflection but one peer is treated as an ordinary nonclient and route propagation fails. It does not explain the condition tested here.

D:

“The desired received prefix is accepted and active while intentionally blocked prefixes stay rejected” belongs to a separate Border Gateway Protocol (BGP) issue: a Junos route is hidden by import policy, but the team troubleshoots only local physical interfaces. It does not explain the condition tested here.

Question 594

Which suggested shortcut would be especially unsafe for this exact situation? A trading-data sender needs to serve many local subscribers, but each listener receives its own redundant copy over the backbone.

  1. Enable the same full-bandwidth unicast copy to every receiver and call it multicast optimization.
  2. Test multicast source-path behavior under each failover case, not only unicast ping.
  3. Maintain consistent RP mappings and failover tests across multicast routers.
  4. Test RP failover and synchronization behavior before expanding Anycast RP.

Explanation

Correct Answer

A:

The tempting alternative fails because IP multicast replicates streams at forwarding branches instead of requiring a separate source-to-receiver unicast stream. The supported action is to design a multicast distribution tree with explicit receiver memberships and test only the subscribed delivery paths.

Incorrect Answers

B:

That prevention measure relates to a stream uses asymmetric unicast routing; multicast forwarding fails intermittently although individual host routes work.; it is not the unsafe shortcut described here.

C:

That prevention measure relates to a PIM sparse-mode receiver has an IGMP join but no multicast traffic because its upstream router cannot resolve the rendezvous point.; it is not the unsafe shortcut described here.

D:

That prevention measure relates to an Anycast RP design uses two RP addresses that do not share the intended anycast identity, producing inconsistent joins.; it is not the unsafe shortcut described here.

Question 595

For this case, select TWO complementary measures or outcome checks that directly resolve the problem: A network marks a customer route with a community but an export policy ignores the community, leaking the route to another peer.

  1. Inspect received communities and export policy terms, then attach a tested community match and reject rule.
  2. Lower AS-path length without fixing the unreachable BGP next-hop address.
  3. Assume attaching a BGP community automatically prevents all external redistribution without policy.
  4. Point to a successful IPv4 traceroute as sufficient proof an IPv6 BGP next hop resolves.
  5. A controlled route is withheld from prohibited peers while approved routes retain their expected advertisements.

Explanation

Correct Answers

A:

Inspect received communities and export policy terms, then attach a tested community match and reject rule. This addresses the dependency that communities are policy metadata; tagging does not enforce advertisement restrictions unless a matching policy acts on it.

E:

A controlled route is withheld from prohibited peers while approved routes retain their expected advertisements. The specific steps required are to inspect received communities and export policy terms, then attach a tested community match and reject rule.

Incorrect Answers

B:

“Lower AS-path length without fixing the unreachable BGP next-hop address” is an unsafe response to a different problem: an iBGP route is received from a reflector but hidden because its third-party next hop is unreachable in inet.0. It is not a valid fix here.

C:

“Assume attaching a BGP community automatically prevents all external redistribution without policy” does not address communities are policy metadata; tagging does not enforce advertisement restrictions unless a matching policy acts on it.

D:

“Point to a successful IPv4 traceroute as sufficient proof an IPv6 BGP next hop resolves” is an unsafe response to a different problem: an IPv6 BGP peer receives a route with an unreachable IPv6 next hop despite an otherwise valid inet6 unicast advertisement. It is not a valid fix here.

Question 596

A Junos enterprise team investigates this incident: A campus access interface keeps a compliant supplicant blocked while EAP requests never reach the expected authentication backend. Which technical explanation most directly identifies the cause or design principle?

  1. MAC-based identity is tied to the observed hardware address and can be spoofed; it is not strong user authentication.
  2. MAC authorization should couple weak identity to constrained role-based network access, not just a successful RADIUS decision.
  3. Guest, server-reject and server-fail outcomes represent different causes and require distinct supported policies.
  4. 802.1X authorization depends on the authenticator, supplicant and authentication-server conversation being correctly connected.

Explanation

Correct Answer

D:

802.1X authorization depends on the authenticator, supplicant and authentication-server conversation being correctly connected. The appropriate response is to inspect switch authenticator state and RADIUS reachability and identity settings, then repair the approved server configuration.

Incorrect Answers

A:

“MAC-based identity is tied to the observed hardware address and can be spoofed; it is not strong user authentication” belongs to a separate Layer 2 Authentication and Access Control issue: a printer's MAC address is duplicated by an unauthorized endpoint that obtains the same weak MAC-based policy. It does not explain the condition tested here.

B:

“MAC authorization should couple weak identity to constrained role-based network access, not just a successful RADIUS decision” belongs to a separate Layer 2 Authentication and Access Control issue: a legacy printer can join after MAC authentication yet is allowed to reach sensitive management segments. It does not explain the condition tested here.

C:

“Guest, server-reject and server-fail outcomes represent different causes and require distinct supported policies” belongs to a separate Layer 2 Authentication and Access Control issue: a credential-rejected user is sent to the guest VLAN even though the planned design reserves guest VLAN for silent non-supplicants. It does not explain the condition tested here.

Question 597

To prevent recurrence of this precise networking failure, which practice should be adopted? A finance video queue configured as low priority cannot meet latency targets because competing transfers share the same service policy.

  1. Audit DSCP preservation and remarking at untrusted edge boundaries.
  2. Plan buffer and shaping rates against provider handoff capacity and expected burst size.
  3. Establish congestion thresholds and monitor starvation as part of queue-priority design.
  4. Document trusted-marking boundaries and test both matched and unmatched multifield traffic.

Explanation

Correct Answer

C:

Establish congestion thresholds and monitor starvation as part of queue-priority design. This guards against scheduler priority and bandwidth allocation affect queuing service but must balance fairness and starvation concerns.

Incorrect Answers

A:

“Audit DSCP preservation and remarking at untrusted edge boundaries” belongs to a separate Class of Service (CoS) issue: a branch egress rewriter incorrectly gives bulk backups the same DSCP as real-time voice. It does not explain the condition tested here.

B:

“Plan buffer and shaping rates against provider handoff capacity and expected burst size” belongs to a separate Class of Service (CoS) issue: a branch link should pace scheduled traffic to a slower uplink yet the team only drops excess packets abruptly. It does not explain the condition tested here.

D:

“Document trusted-marking boundaries and test both matched and unmatched multifield traffic” belongs to a separate Class of Service (CoS) issue: a security function needs to classify a subset of traffic by source and destination criteria rather than trusted external markings. It does not explain the condition tested here.

Question 598

A Junos enterprise team investigates this incident: An access-area adjacency drops after one device is changed to shorter OSPF Hello timers but its peer keeps prior settings. Which technical explanation most directly identifies the cause or design principle?

  1. OSPF external route costs and metric types affect path choice and must reflect intended topology and failover behavior.
  2. OSPFv3 adjacency depends on participating interfaces and valid IPv6 link-local neighbor communication.
  3. An established OSPFv3 neighbor does not prove every desired IPv6 interface prefix is included in the protocol topology.
  4. OSPF neighbors require compatible Hello and dead interval settings on the shared interface.

Explanation

Correct Answer

D:

OSPF neighbors require compatible Hello and dead interval settings on the shared interface. The appropriate response is to compare OSPF interface timers and align the two peers to approved Hello and dead values.

Incorrect Answers

A:

“OSPF external route costs and metric types affect path choice and must reflect intended topology and failover behavior” belongs to a separate Interior Gateway Protocols (IGPs) issue: a branch receives two external paths with different metric-type assumptions after a policy change and prefers the wrong exit. It does not explain the condition tested here.

B:

“OSPFv3 adjacency depends on participating interfaces and valid IPv6 link-local neighbor communication” belongs to a separate Interior Gateway Protocols (IGPs) issue: a new IPv6 peering uses OSPFv3 on a retired VLAN unit rather than the active routed transit interface. It does not explain the condition tested here.

C:

“An established OSPFv3 neighbor does not prove every desired IPv6 interface prefix is included in the protocol topology” belongs to a separate Interior Gateway Protocols (IGPs) issue: OSPFv3 peering comes up but the desired IPv6 loopback is not in the routing database after a rollout. It does not explain the condition tested here.

Question 599

To prevent recurrence of this precise networking failure, which practice should be adopted? Two authentication methods are enabled on a shared switch port but fallback ordering bypasses a successful 802.1X result.

  1. Separate EAP silence, reject and timeout counters in authentication operational monitoring.
  2. Test multi-method paths including success, reject and timeout cases before deployment.
  3. Review authorization policies for MAC endpoints against a least-privilege access matrix.
  4. Test captive-portal redirects, session expiry and post-login VLAN access in guest-network acceptance.

Explanation

Correct Answer

B:

Test multi-method paths including success, reject and timeout cases before deployment. This guards against authentication-method precedence and session state can affect which effective authorization takes hold.

Incorrect Answers

A:

“Separate EAP silence, reject and timeout counters in authentication operational monitoring” belongs to a separate Layer 2 Authentication and Access Control issue: a RADIUS server reports no Access-Request for a silent legacy terminal, while switch timers show no EAP response. It does not explain the condition tested here.

C:

“Review authorization policies for MAC endpoints against a least-privilege access matrix” belongs to a separate Layer 2 Authentication and Access Control issue: a MAC RADIUS policy authenticates a known camera but applies the broad employee VLAN instead of a camera-only network. It does not explain the condition tested here.

D:

“Test captive-portal redirects, session expiry and post-login VLAN access in guest-network acceptance” belongs to a separate Layer 2 Authentication and Access Control issue: guest users on an EX switch see no captive login page because browser HTTP redirects are not being applied on the intended VLAN. It does not explain the condition tested here.

Question 600

Which suggested shortcut would be especially unsafe for this exact situation? An iBGP egress advertisement forwards a transit next hop that branch routers cannot resolve, creating traffic blackholes.

  1. Track every BGP advertise-inactive exception and test cross-protocol route selection.
  2. Assume TCP session Established proves every learned prefix has a usable forwarding next hop.
  3. Review fall-through behavior with traceable policy test cases before changes reach production.
  4. Distinguish internal exit selection from inbound inter-AS path influence in routing design reviews.

Explanation

Correct Answer

B:

The tempting alternative fails because a reachable BGP peering session does not itself make a third-party route next hop recursively resolvable. The supported action is to inspect next-hop attributes and IGP reachability; deliberately choose appropriate next-hop-self policy or add valid underlay routes.

Incorrect Answers

A:

That prevention measure relates to a BGP export policy advertises a prefix that exists only as an inactive local candidate, despite an expectation of default active-only behavior.; it is not the unsafe shortcut described here.

C:

That prevention measure relates to a route policy lacks an explicit intended default action, and unmatched BGP prefixes behave differently than planned.; it is not the unsafe shortcut described here.

D:

That prevention measure relates to a dual-homed site changes internal LOCAL_PREF but sees no change in the other autonomous system's inbound traffic choice.; it is not the unsafe shortcut described here.

Enterprise Routing and Switching, Professional (JNCIP-ENT) (JN0-650) Practice Tests

UP

SPECIAL OFFER: GET 10% OFF

This is ONE TIME OFFER

ExamSnap Discount Offer
Enter Your Email Address to Receive Your 10% Off Discount Code

A confirmation link will be sent to this email address to verify your login. *We value your privacy. We will not rent or sell your email address.

Download Free Demo of VCE Exam Simulator

Experience Avanset VCE Exam Simulator for yourself.

Simply submit your e-mail address below to get started with our interactive software demo of your free trial.

Free Demo Limits: In the demo version you will be able to access only first 5 questions from exam.