100% Latest & Updated Juniper JN0-650 Practice Test Questions, Exam Dumps & Verified Answers!
30 Days Free Updates, Instant Download!
Question 600
Which suggested shortcut would be especially unsafe for this exact situation? An iBGP egress advertisement forwards a transit next hop that branch routers cannot resolve, creating traffic blackholes.
- Track every BGP advertise-inactive exception and test cross-protocol route selection.
- Assume TCP session Established proves every learned prefix has a usable forwarding next hop.
- Review fall-through behavior with traceable policy test cases before changes reach production.
- Distinguish internal exit selection from inbound inter-AS path influence in routing design reviews.
Explanation
Correct Answer
B:The tempting alternative fails because a reachable BGP peering session does not itself make a third-party route next hop recursively resolvable. The supported action is to inspect next-hop attributes and IGP reachability; deliberately choose appropriate next-hop-self policy or add valid underlay routes.
Incorrect Answers
A:That prevention measure relates to a BGP export policy advertises a prefix that exists only as an inactive local candidate, despite an expectation of default active-only behavior.; it is not the unsafe shortcut described here.
C:That prevention measure relates to a route policy lacks an explicit intended default action, and unmatched BGP prefixes behave differently than planned.; it is not the unsafe shortcut described here.
D:That prevention measure relates to a dual-homed site changes internal LOCAL_PREF but sees no change in the other autonomous system's inbound traffic choice.; it is not the unsafe shortcut described here.
Question 601
Which suggested shortcut would be especially unsafe for this exact situation? An engineer adds advertise-inactive and downstream peers begin receiving a BGP route that loses to an OSPF route locally.
- Review policy ordering with negative tests and explicit default actions on every change.
- Test path equivalence, forwarding and failure convergence before enabling transit ECMP.
- Treat advertise-inactive as a universal method to export all hidden and rejected routes.
- Maintain community inventories and test outbound policy outcomes for allowed and denied prefixes.
Explanation
Correct Answer
C:The tempting alternative fails because Junos normally exports active routes; advertise-inactive can expose a best BGP candidate that lost to another protocol. The supported action is to inspect active-route selection and the advertise-inactive configuration; keep it only if the external requirement justifies it.
Incorrect Answers
A:That prevention measure relates to a BGP export configuration has a broad first match so a specific downstream deny never evaluates the target prefix.; it is not the unsafe shortcut described here.
B:That prevention measure relates to equal candidate BGP routes are visible but no multipath forwarding entry is installed because eligibility or policy differs.; it is not the unsafe shortcut described here.
D:That prevention measure relates to a network marks a customer route with a community but an export policy ignores the community, leaking the route to another peer.; it is not the unsafe shortcut described here.
Question 602
Select THREE complementary corrective, verification, or preventive controls for this scenario: An ingress classification filter for one terminal type inadvertently redirects other hosts using the same uplink.
- Create an independent VSTP instance for every VLAN without checking platform scaling limits.
- Check policy coverage and unintended-match cases before activating filter-based steering.
- Narrow the match to approved selectors and compare affected packet counters and VLAN assignment.
- Use a catch-all quarantine match without analyzing which hosts also traverse the interface.
- Only the intended endpoint class is moved while nonmatching hosts retain correct access.
- Remove customer inner VLAN tags at entry and assume overlapping customer IDs remain isolated.
Explanation
Correct Answers
B:Prevention of recurrence: Overbroad match conditions can cause unauthorized VLAN steering and affect both security and reachability.
C:Correction: Overbroad match conditions can cause unauthorized VLAN steering and affect both security and reachability.
E:Confirmation: Narrow the match to approved selectors and compare affected packet counters and VLAN assignment.
Incorrect Answers
A:“Create an independent VSTP instance for every VLAN without checking platform scaling limits” is an unsafe response to a different problem: a network uses one VLAN-wide topology but wants two forwarding trees for different groups without an instance for every VLAN. It is not a valid fix here.
D:“Use a catch-all quarantine match without analyzing which hosts also traverse the interface” does not address overbroad match conditions can cause unauthorized VLAN steering and affect both security and reachability.
F:“Remove customer inner VLAN tags at entry and assume overlapping customer IDs remain isolated” is an unsafe response to a different problem: a service provider must carry multiple customer VLAN IDs transparently over one metro Ethernet handoff. It is not a valid fix here.
Question 603
A network change is required for the following specific situation: An edge router uses a broad multicast filter that blocks valid collaboration groups alongside restricted lab streams. Which corrective action is most appropriate?
- Check group-to-RP mapping and RP reachability, then repair the RP discovery or explicit mapping.
- Refine the relevant multicast policy ranges and inspect forwarding for both permitted and denied groups.
- Identify the configured RPF table and verify the source route and next hop in that table before updating the multicast policy.
- Update receiver memberships to use the approved source and group, and validate end-to-end (S,G) trees.
Explanation
Correct Answer
B:Policy selectors must match the intended multicast group and source ranges so unrelated services are not blocked or leaked. Verify this by checking that restricted groups are stopped at the boundary while approved collaboration streams still reach subscribers.
Incorrect Answers
A:“Check group-to-RP mapping and RP reachability, then repair the RP discovery or explicit mapping” belongs to a separate IP Multicast issue: a PIM sparse-mode receiver has an IGMP join but no multicast traffic because its upstream router cannot resolve the rendezvous point. It does not explain the condition tested here.
C:“Identify the configured RPF table and verify the source route and next hop in that table before updating the multicast policy” belongs to a separate IP Multicast issue: a campus uses a separate inet.2 multicast RPF table and investigators inspect only inet.0, overlooking a stale source route. It does not explain the condition tested here.
D:“Update receiver memberships to use the approved source and group, and validate end-to-end (S,G) trees” belongs to a separate IP Multicast issue: a campus multicast application migrates ASM clients to SSM but does not update the source-qualified membership requests. It does not explain the condition tested here.
Question 604
A Junos enterprise team investigates this incident: An ABR stops advertising a branch prefix into the backbone after an OSPF area-range summary is configured incorrectly. Which technical explanation most directly identifies the cause or design principle?
- Protocol route advertisement and active-route selection are separate; lower route preference can select a non-OSPF candidate.
- Routing-policy match criteria must align with the source route type and the intended OSPF export behavior.
- OSPFv3 adjacency depends on participating interfaces and valid IPv6 link-local neighbor communication.
- Area summarization scope must correctly cover the intended component networks; the wrong range can suppress or misrepresent reachability.
Explanation
Correct Answer
D:Area summarization scope must correctly cover the intended component networks; the wrong range can suppress or misrepresent reachability. The appropriate response is to verify the aggregate range, component prefixes and ABR advertisements, then correct the summary policy to the approved address plan.
Incorrect Answers
A:“Protocol route advertisement and active-route selection are separate; lower route preference can select a non-OSPF candidate” belongs to a separate Interior Gateway Protocols (IGPs) issue: a team wrongly concludes OSPFv3 failed when inet6.0 shows a static route active and the OSPFv3 candidate inactive. It does not explain the condition tested here.
B:“Routing-policy match criteria must align with the source route type and the intended OSPF export behavior” belongs to a separate Interior Gateway Protocols (IGPs) issue: an OSPF export term filters routes based on the wrong protocol, so an intended static default is not originated. It does not explain the condition tested here.
C:“OSPFv3 adjacency depends on participating interfaces and valid IPv6 link-local neighbor communication” belongs to a separate Interior Gateway Protocols (IGPs) issue: a new IPv6 peering uses OSPFv3 on a retired VLAN unit rather than the active routed transit interface. It does not explain the condition tested here.
Question 605
Select THREE complementary corrective, verification, or preventive controls for this scenario: A receiver port stops getting multicast because IGMP membership was not processed by the access switch after an interface move.
- Monitor IGMP membership churn and snooping state when moving clients between VLANs.
- Require multicast forwarding to follow the receiver's shortest downstream path with no regard to source RPF.
- Inspect IGMP joins and snooping membership per VLAN and correct membership handling on the actual access ports.
- Disable IGMP snooping everywhere and assume uncontrolled flooding is equivalent to correct membership delivery.
- Subscribed receivers get the stream without unnecessary flood to ports that did not join.
- Assume an ASM (*,G) join identifies and restricts a unique approved source by itself.
Explanation
Correct Answers
A:Prevention of recurrence: IGMP reports express receiver interest, and IGMP snooping uses that interest to constrain Layer 2 replication.
C:Correction: IGMP reports express receiver interest, and IGMP snooping uses that interest to constrain Layer 2 replication.
E:Confirmation: Inspect IGMP joins and snooping membership per VLAN and correct membership handling on the actual access ports.
Incorrect Answers
B:“Require multicast forwarding to follow the receiver's shortest downstream path with no regard to source RPF” is an unsafe response to a different problem: a stream uses asymmetric unicast routing; multicast forwarding fails intermittently although individual host routes work. It is not a valid fix here.
D:“Disable IGMP snooping everywhere and assume uncontrolled flooding is equivalent to correct membership delivery” does not address IGMP reports express receiver interest, and IGMP snooping uses that interest to constrain Layer 2 replication.
F:“Assume an ASM (*,G) join identifies and restricts a unique approved source by itself” is an unsafe response to a different problem: a controlled one-source data feed requires group membership constrained by both source and group, not arbitrary senders. It is not a valid fix here.
Question 606
Which suggested shortcut would be especially unsafe for this exact situation? Two queues use the same scheduler priority, but the business expects one to always win during contention.
- Document trusted-marking boundaries and test both matched and unmatched multifield traffic.
- Audit DSCP preservation and remarking at untrusted edge boundaries.
- Mark every forwarding class strict-high with no attention to starvation or bounded resource sharing.
- Test both average-rate enforcement and microburst tolerance for new policer profiles.
Explanation
Correct Answer
C:The tempting alternative fails because scheduler priority and bandwidth allocation affect queuing service but must balance fairness and starvation concerns. The supported action is to assign the intended service class and scheduler priorities with measured bandwidth needs, then validate.
Incorrect Answers
A:That prevention measure relates to an application needs priority regardless of incoming DSCP, but an interface uses only a header-based classifier.; it is not the unsafe shortcut described here.
B:That prevention measure relates to a customer access switch trusts external CoS bits and redistributes high-priority markings to all guest traffic.; it is not the unsafe shortcut described here.
D:That prevention measure relates to a traffic policer drops small microbursts despite an acceptable average rate because its configured burst size is too tight.; it is not the unsafe shortcut described here.
Question 607
Which suggested shortcut would be especially unsafe for this exact situation? An OSPF import policy hides external routes on one device while neighbors retain them, confusing the team reviewing reachability.
- Specify preferred OSPF DR candidates on shared transit segments and account for non-preemptive elections.
- Change the remote area's physical cabling before checking local route filtering.
- Run prefix-boundary tests before enabling area aggregation on an ABR.
- Classify loopbacks and user-facing links separately from peer links when applying passive templates.
Explanation
Correct Answer
B:The tempting alternative fails because local import policy can affect installed route visibility independently of the remote origination of LSAs. The supported action is to compare LSDB advertisements with local route policy and inet.0 state; correct the intended import filter.
Incorrect Answers
A:That prevention measure relates to a shared multiaccess segment elects an undesired OSPF DR after new routers are connected, and control-plane load rises.; it is not the unsafe shortcut described here.
C:That prevention measure relates to a campus summarization change hides a needed subnet because the configured address range omits it.; it is not the unsafe shortcut described here.
D:That prevention measure relates to an OSPF neighbor remains Down because the routed transit interface was left passive after a site template rollout.; it is not the unsafe shortcut described here.
Question 608
A network change is required for the following specific situation: A telephony desk requires multiple authenticated identities while the switch policy allows only one active supplicant. Which corrective action is most appropriate?
- Inspect switch captive portal attachment, redirect reachability and completion flow for a test guest.
- Choose a documented compatible nonbrowser method such as supported MAC RADIUS under narrow access controls.
- Consult the target release's official 802.1X support matrix and adapt the authorization design to supported methods.
- Select a supported multi-supplicant or appropriate phone/PC access mode and test per-device policies.
Explanation
Correct Answer
D:802.1X host-mode selection affects whether multiple downstream devices can be independently authenticated and authorized. Verify this by checking that both intended endpoints receive their authorized VLAN/policy without permitting unapproved devices.
Incorrect Answers
A:“Inspect switch captive portal attachment, redirect reachability and completion flow for a test guest” belongs to a separate Layer 2 Authentication and Access Control issue: guest users on an EX switch see no captive login page because browser HTTP redirects are not being applied on the intended VLAN. It does not explain the condition tested here.
B:“Choose a documented compatible nonbrowser method such as supported MAC RADIUS under narrow access controls” belongs to a separate Layer 2 Authentication and Access Control issue: a noninteractive sensor is trapped in captive-portal onboarding because operators selected browser authentication for all endpoints. It does not explain the condition tested here.
C:“Consult the target release's official 802.1X support matrix and adapt the authorization design to supported methods” belongs to a separate Layer 2 Authentication and Access Control issue: an engineer copies legacy 802.1X fallback settings to a platform whose supported feature matrix excludes them. It does not explain the condition tested here.
Question 609
The team believes it has resolved this Junos issue: A RED drop profile is applied too aggressively and drops packets even under moderate load. Which observation best verifies the specific intended result?
- Observed queue counters show voice packets in the designated forwarding class after classification.
- Drop counters and queue utilization follow the intended curve through increasing load.
- Only traffic meeting the defined match receives the intended queue and packet loss priority.
- Only approved media streams leave with high-priority code points; backup traffic uses its designated mark.
Explanation
Correct Answer
B:Drop counters and queue utilization follow the intended curve through increasing load. This checks the relevant result after review configured drop probability versus fill level and align the profile with acceptable congestion targets.
Incorrect Answers
A:“Observed queue counters show voice packets in the designated forwarding class after classification” belongs to a separate Class of Service (CoS) issue: a campus uplink transmits marked video as ordinary data because no behavior-aggregate classifier is attached at ingress. It does not explain the condition tested here.
C:“Only traffic meeting the defined match receives the intended queue and packet loss priority” belongs to a separate Class of Service (CoS) issue: a security function needs to classify a subset of traffic by source and destination criteria rather than trusted external markings. It does not explain the condition tested here.
D:“Only approved media streams leave with high-priority code points; backup traffic uses its designated mark” belongs to a separate Class of Service (CoS) issue: a customer access switch trusts external CoS bits and redistributes high-priority markings to all guest traffic. It does not explain the condition tested here.
Question 610
The team believes it has resolved this Junos issue: A campus uses a separate inet.2 multicast RPF table and investigators inspect only inet.0, overlooking a stale source route. Which observation best verifies the specific intended result?
- The required PIM neighbors appear and downstream join state tracks active interested receivers.
- Only the specified source delivers data to receivers of the chosen SSM group.
- The selected upstream RPF neighbor and packet arrival interface agree, restoring intended multicast flow.
- Backbone utilization reflects one upstream multicast copy per tree branch while interested receivers obtain the stream.
Explanation
Correct Answer
C:The selected upstream RPF neighbor and packet arrival interface agree, restoring intended multicast flow. This checks the relevant result after identify the configured RPF table and verify the source route and next hop in that table before updating the multicast policy.
Incorrect Answers
A:“The required PIM neighbors appear and downstream join state tracks active interested receivers” belongs to a separate IP Multicast issue: a PIM sparse-mode segment cannot maintain neighbor state because PIM is configured on the wrong routed interface. It does not explain the condition tested here.
B:“Only the specified source delivers data to receivers of the chosen SSM group” belongs to a separate IP Multicast issue: a streaming application expects a source-specific group to accept traffic from any origin, contrary to its (S,G) subscription. It does not explain the condition tested here.
D:“Backbone utilization reflects one upstream multicast copy per tree branch while interested receivers obtain the stream” belongs to a separate IP Multicast issue: a trading-data sender needs to serve many local subscribers, but each listener receives its own redundant copy over the backbone. It does not explain the condition tested here.
Enterprise Routing and Switching, Professional (JNCIP-ENT) (JN0-650) Practice Tests