Juniper JN0-650 Exam Dumps, Practice Test Questions

100% Latest & Updated Juniper JN0-650 Practice Test Questions, Exam Dumps & Verified Answers!
30 Days Free Updates, Instant Download!

Juniper JN0-650  Premium File
$54.99
$49.99

JN0-650 Premium File

  • Premium File: 107 Questions & Answers. Last update: Nov 7, 2026
  • Latest Questions
  • 100% Accurate Answers
  • Fast Exam Updates

JN0-650 Premium File

Juniper JN0-650  Premium File
  • Premium File: 107 Questions & Answers. Last update: Nov 7, 2026
  • Latest Questions
  • 100% Accurate Answers
  • Fast Exam Updates
$54.99
$49.99

Juniper JN0-650 Practice Test 8

Question 70

The team believes it has resolved this Junos issue: Two equal LOCAL_PREF and AS-path candidates remain tied until MED influences the choice under the applicable comparison rules. Which observation best verifies the specific intended result?

  1. The routing and forwarding tables show the intended multiple next hops only for qualifying routes.
  2. The downstream client learns approved prefixes and cluster-loop checks remain operational.
  3. The route is accepted only after the AS-path loop is removed, with stable forwarding.
  4. The chosen best path follows the documented attribute ordering rather than a single observed MED value.

Explanation

Correct Answer

D:

The chosen best path follows the documented attribute ordering rather than a single observed MED value. This checks the relevant result after read all relevant candidate attributes and apply policy consistent with intended tie-breaker precedence.

Incorrect Answers

A:

“The routing and forwarding tables show the intended multiple next hops only for qualifying routes” belongs to a separate Border Gateway Protocol (BGP) issue: two eBGP sessions over different transports are expected to provide ECMP but only one forwarding next hop appears. It does not explain the condition tested here.

B:

“The downstream client learns approved prefixes and cluster-loop checks remain operational” belongs to a separate Border Gateway Protocol (BGP) issue: a route-reflector topology loses an iBGP-advertised prefix because clients are not configured under the intended reflector cluster. It does not explain the condition tested here.

C:

“The route is accepted only after the AS-path loop is removed, with stable forwarding” belongs to a separate Border Gateway Protocol (BGP) issue: the local AS appears in a received external BGP AS_PATH and the route is rejected despite valid prefix reachability. It does not explain the condition tested here.

Question 71

A Junos enterprise team investigates this incident: A VSTP network intended to send voice and data VLANs over different active paths instead blocks both on the same uplink. Which technical explanation most directly identifies the cause or design principle?

  1. Filter-based VLAN assignment depends on correctly matching the selected traffic and applying the filter at the right ingress point.
  2. Private VLAN isolated ports are designed to limit lateral L2 communication while still reaching the permitted promiscuous uplink.
  3. VSTP provides per-VLAN spanning-tree behavior for compatibility and path control when the design and platform support it.
  4. MVRP registrations can persist where membership state or participation has not been updated consistently.

Explanation

Correct Answer

C:

VSTP provides per-VLAN spanning-tree behavior for compatibility and path control when the design and platform support it. The appropriate response is to inspect VSTP VLAN membership, root priority and port roles, then repair the intended per-VLAN root arrangement.

Incorrect Answers

A:

“Filter-based VLAN assignment depends on correctly matching the selected traffic and applying the filter at the right ingress point” belongs to a separate Ethernet Switching and Spanning Tree issue: a campus onboarding policy puts cameras on the normal data VLAN even though a targeted filter-based VLAN should steer them. It does not explain the condition tested here.

B:

“Private VLAN isolated ports are designed to limit lateral L2 communication while still reaching the permitted promiscuous uplink” belongs to a separate Ethernet Switching and Spanning Tree issue: a shared guest access VLAN allows two untrusted hotel-room ports to communicate directly, violating the isolation design. It does not explain the condition tested here.

D:

“MVRP registrations can persist where membership state or participation has not been updated consistently” belongs to a separate Ethernet Switching and Spanning Tree issue: a campus migration removes a VLAN at the source while a trunk continues advertising it unexpectedly. It does not explain the condition tested here.

Question 72

A network change is required for the following specific situation: A one-to-many lecture stream is configured as separate unicast connections and saturates a WAN link to a remote campus. Which corrective action is most appropriate?

  1. Design a multicast distribution tree with explicit receiver memberships and test only the subscribed delivery paths.
  2. Inspect MSDP peer state and source-active information, then configure the permitted peer relationships.
  3. Identify the configured RPF table and verify the source route and next hop in that table before updating the multicast policy.
  4. Compare source-route preference with actual multicast ingress and restore a consistent authorized upstream path.

Explanation

Correct Answer

A:

IP multicast replicates streams at forwarding branches instead of requiring a separate source-to-receiver unicast stream. Verify this by checking that backbone utilization reflects one upstream multicast copy per tree branch while interested receivers obtain the stream.

Incorrect Answers

B:

“Inspect MSDP peer state and source-active information, then configure the permitted peer relationships” belongs to a separate IP Multicast issue: a receiver domain requires discovery of sources known behind another RP, yet inter-RP source information exchange is absent. It does not explain the condition tested here.

C:

“Identify the configured RPF table and verify the source route and next hop in that table before updating the multicast policy” belongs to a separate IP Multicast issue: a campus uses a separate inet.2 multicast RPF table and investigators inspect only inet.0, overlooking a stale source route. It does not explain the condition tested here.

D:

“Compare source-route preference with actual multicast ingress and restore a consistent authorized upstream path” belongs to a separate IP Multicast issue: a redundant network changes the preferred route to the source while packets keep arriving on the other physical link. It does not explain the condition tested here.

Question 73

A Junos enterprise team investigates this incident: A campus changes a telephone port but LLDP-MED location data remains mapped to an old floor. Which technical explanation most directly identifies the cause or design principle?

  1. PoE availability depends on the supported per-port power class and total switch power budget, not just Ethernet link status.
  2. LLDP-MED location metadata can support telephony location services and must match actual switch-port placement.
  3. Physical PoE delivery and negotiated device power requirements must match switch and endpoint capabilities.
  4. Voice VLAN placement and CoS marking are related but separate; correct VLAN tagging does not guarantee priority handling.

Explanation

Correct Answer

B:

LLDP-MED location metadata can support telephony location services and must match actual switch-port placement. The appropriate response is to update the approved location mapping and confirm transmitted LLDP-MED location information on the affected port.

Incorrect Answers

A:

“PoE availability depends on the supported per-port power class and total switch power budget, not just Ethernet link status” belongs to a separate IP Telephony Features issue: a high-power phone intermittently reboots whenever all powered endpoints on a switch chassis start simultaneously. It does not explain the condition tested here.

C:

“Physical PoE delivery and negotiated device power requirements must match switch and endpoint capabilities” belongs to a separate IP Telephony Features issue: an emergency intercom can establish Ethernet link but loses power during activity because its PD class is not supported by that port. It does not explain the condition tested here.

D:

“Voice VLAN placement and CoS marking are related but separate; correct VLAN tagging does not guarantee priority handling” belongs to a separate IP Telephony Features issue: a voice VLAN is configured correctly yet the switch's trust and rewrite policy fails to preserve the required phone traffic classification. It does not explain the condition tested here.

Question 74

The team believes it has resolved this Junos issue: A filter-based VLAN security design uses a rule that catches too many packets and steers legitimate devices into quarantine. Which observation best verifies the specific intended result?

  1. The customer control protocol reaches the far endpoint without altering the provider's own spanning-tree topology.
  2. The VLAN registration propagates to the intended downstream trunk and reaches its member ports.
  3. Selected voice and data VLANs use the approved active links without loops.
  4. Only the intended endpoint class is moved while nonmatching hosts retain correct access.

Explanation

Correct Answer

D:

Only the intended endpoint class is moved while nonmatching hosts retain correct access. This checks the relevant result after narrow the match to approved selectors and compare affected packet counters and VLAN assignment.

Incorrect Answers

A:

“The customer control protocol reaches the far endpoint without altering the provider's own spanning-tree topology” belongs to a separate Ethernet Switching and Spanning Tree issue: a private L2 service must extend customer control protocols, yet the provider fabric consumes or drops the customer's BPDUs. It does not explain the condition tested here.

B:

“The VLAN registration propagates to the intended downstream trunk and reaches its member ports” belongs to a separate Ethernet Switching and Spanning Tree issue: a new switch automatically discovers VLAN registrations on one trunk, but an intermediate trunk lacks MVRP participation and blocks the VLAN. It does not explain the condition tested here.

C:

“Selected voice and data VLANs use the approved active links without loops” belongs to a separate Ethernet Switching and Spanning Tree issue: a legacy interop design needs separate per-VLAN spanning-tree compatibility but all VLANs inherit one unsuitable tree. It does not explain the condition tested here.

Question 75

A network change is required for the following specific situation: An access switch is moved to Junos OS Evolved but the team assumes every earlier guest-VLAN feature still exists on L2 802.1X interfaces. Which corrective action is most appropriate?

  1. Inspect switch authenticator state and RADIUS reachability and identity settings, then repair the approved server configuration.
  2. Check returned RADIUS attributes and supported platform software, then enforce a valid authorization assignment.
  3. Consult the target release's official 802.1X support matrix and adapt the authorization design to supported methods.
  4. Inspect switch captive portal attachment, redirect reachability and completion flow for a test guest.

Explanation

Correct Answer

C:

802.1X guest and fallback capabilities are platform and Junos variant specific; unsupported features must not be assumed. Verify this by checking that validation shows only supported options in use and the intended access-denial/fallback behavior.

Incorrect Answers

A:

“Inspect switch authenticator state and RADIUS reachability and identity settings, then repair the approved server configuration” belongs to a separate Layer 2 Authentication and Access Control issue: a corporate laptop presents valid 802.1X credentials but stays unauthorized because the switch is using the wrong RADIUS server profile. It does not explain the condition tested here.

B:

“Check returned RADIUS attributes and supported platform software, then enforce a valid authorization assignment” belongs to a separate Layer 2 Authentication and Access Control issue: a switch receives successful RADIUS Access-Accept but the user still lands in an unexpected VLAN because the dynamic assignment is not supported on that platform. It does not explain the condition tested here.

D:

“Inspect switch captive portal attachment, redirect reachability and completion flow for a test guest” belongs to a separate Layer 2 Authentication and Access Control issue: a visitor portal redirects browser traffic but never releases the user to the approved network after authentication. It does not explain the condition tested here.

Question 76

A Junos enterprise team investigates this incident: A non-802.1X network printer is consistently rejected because its access port permits only EAP supplicants. Which technical explanation most directly identifies the cause or design principle?

  1. MAC RADIUS provides a fallback identity mechanism for suitable non-802.1X devices, with weaker assurance than certificate-based 802.1X.
  2. 802.1X authorization depends on the authenticator, supplicant and authentication-server conversation being correctly connected.
  3. Authentication success and postauthentication VLAN/policy assignment are separate stages whose feature support may vary.
  4. Captive portals presume interactive browser capabilities, making them unsuitable as the sole access method for headless devices.

Explanation

Correct Answer

A:

MAC RADIUS provides a fallback identity mechanism for suitable non-802.1X devices, with weaker assurance than certificate-based 802.1X. The appropriate response is to configure supported MAC RADIUS under least-privilege policy and register the device MAC with the approved service.

Incorrect Answers

B:

“802.1X authorization depends on the authenticator, supplicant and authentication-server conversation being correctly connected” belongs to a separate Layer 2 Authentication and Access Control issue: a campus access interface keeps a compliant supplicant blocked while EAP requests never reach the expected authentication backend. It does not explain the condition tested here.

C:

“Authentication success and postauthentication VLAN/policy assignment are separate stages whose feature support may vary” belongs to a separate Layer 2 Authentication and Access Control issue: a switch receives successful RADIUS Access-Accept but the user still lands in an unexpected VLAN because the dynamic assignment is not supported on that platform. It does not explain the condition tested here.

D:

“Captive portals presume interactive browser capabilities, making them unsuitable as the sole access method for headless devices” belongs to a separate Layer 2 Authentication and Access Control issue: a captive portal requirement is applied to a headless barcode scanner that has no web browser to follow its redirect. It does not explain the condition tested here.

Question 77

Which suggested shortcut would be especially unsafe for this exact situation? A corporate laptop presents valid 802.1X credentials but stays unauthorized because the switch is using the wrong RADIUS server profile.

  1. Test fail-open/fail-closed decisions and platform-specific fallback capabilities in disaster recovery exercises.
  2. Grant unbounded port access to all endpoints instead of diagnosing the RADIUS/EAP path.
  3. Test multi-method paths including success, reject and timeout cases before deployment.
  4. Require inventory ownership and anomaly monitoring for MAC RADIUS exceptions.

Explanation

Correct Answer

B:

The tempting alternative fails because 802.1X authorization depends on the authenticator, supplicant and authentication-server conversation being correctly connected. The supported action is to inspect switch authenticator state and RADIUS reachability and identity settings, then repair the approved server configuration.

Incorrect Answers

A:

That prevention measure relates to an enterprise fallback design accidentally places unauthenticated users into the production network when all RADIUS servers fail.; it is not the unsafe shortcut described here.

C:

That prevention measure relates to two authentication methods are enabled on a shared switch port but fallback ordering bypasses a successful 802.1X result.; it is not the unsafe shortcut described here.

D:

That prevention measure relates to a printer's MAC address is duplicated by an unauthorized endpoint that obtains the same weak MAC-based policy.; it is not the unsafe shortcut described here.

Question 78

A network change is required for the following specific situation: A branch wants to enforce a traffic contract on an incoming service flow yet applies policing to an unrelated egress path. Which corrective action is most appropriate?

  1. Associate the approved scheduler map with the correct egress interface and confirm class queue counters.
  2. Assign the intended service class and scheduler priorities with measured bandwidth needs, then validate.
  3. Apply a correctly scoped ingress policer with tested rate and burst values on the relevant flow.
  4. Map the two packet categories to the intended PLP levels and verify drop-profile response.

Explanation

Correct Answer

C:

A policer enforces traffic rate or burst limits and can discard or mark out-of-profile input; shaping buffers traffic for paced egress. Verify this by checking that measured guest ingress usage remains within policy and permitted business traffic is unaffected.

Incorrect Answers

A:

“Associate the approved scheduler map with the correct egress interface and confirm class queue counters” belongs to a separate Class of Service (CoS) issue: a low-latency queue is correctly classified but voice delays because its egress scheduler map is absent from the trunk. It does not explain the condition tested here.

B:

“Assign the intended service class and scheduler priorities with measured bandwidth needs, then validate” belongs to a separate Class of Service (CoS) issue: two queues use the same scheduler priority, but the business expects one to always win during contention. It does not explain the condition tested here.

D:

“Map the two packet categories to the intended PLP levels and verify drop-profile response” belongs to a separate Class of Service (CoS) issue: packets with two different drop precedence values are treated as equally discardable during congestion. It does not explain the condition tested here.

Question 79

Which suggested shortcut would be especially unsafe for this exact situation? A dual-attached Ethernet segment experiences persistent duplicates during link recovery because multihoming election or ESI state differs.

  1. Enable independent active forwarding on every multihomed link while ignoring ESI and DF controls.
  2. Validate EVPN Type 2 and Type 3 propagation separately in new VNI bring-up tests.
  3. Include underlay loopback reachability and MTU checks in VXLAN overlay deployment QA.
  4. Maintain a central VNI registry and test cross-tenant isolation on each leaf rollout.

Explanation

Correct Answer

A:

The tempting alternative fails because EVPN multihoming uses Ethernet segment identification and designated-forwarder or split-horizon rules to avoid loops. The supported action is to inspect shared ESI, DF election and Ethernet-segment routes, then correct the multihoming configuration.

Incorrect Answers

B:

That prevention measure relates to a bridge domain has valid unicast Type 2 entries yet remote VTEPs do not discover a new participating segment for BUM forwarding.; it is not the unsafe shortcut described here.

C:

That prevention measure relates to a VXLAN overlay's BGP EVPN routes are present, but the underlay cannot route to a remote VTEP loopback.; it is not the unsafe shortcut described here.

D:

“Maintain a central VNI registry and test cross-tenant isolation on each leaf rollout” instead concerns another network scenario: A fabric uses conflicting VLAN-to-VNI mappings on two leaf switches, bridging different tenant segments together. It does not address the requirement here.

Question 80

To prevent recurrence of this precise networking failure, which practice should be adopted? A route-reflector client receives an external destination but lacks the underlay path to the advertised next hop.

  1. Audit prefix and mask-length boundaries with positive and negative routing-policy tests.
  2. Test expected best-path behavior before modifying LOCAL_PREF across internal peers.
  3. Review next-hop propagation and IGP coverage whenever an eBGP route enters iBGP.
  4. Include show route hidden and policy term hit checks in BGP troubleshooting playbooks.

Explanation

Correct Answer

C:

Review next-hop propagation and IGP coverage whenever an eBGP route enters iBGP. This guards against a reachable BGP peering session does not itself make a third-party route next hop recursively resolvable.

Incorrect Answers

A:

“Audit prefix and mask-length boundaries with positive and negative routing-policy tests” belongs to a separate Border Gateway Protocol (BGP) issue: a prefix-list matches a broad aggregate but accepts unwanted subprefixes from a new external neighbor. It does not explain the condition tested here.

B:

“Test expected best-path behavior before modifying LOCAL_PREF across internal peers” belongs to a separate Border Gateway Protocol (BGP) issue: an enterprise chooses a different BGP exit after import policy assigns a higher local preference to the backup path. It does not explain the condition tested here.

D:

“Include show route hidden and policy term hit checks in BGP troubleshooting playbooks” belongs to a separate Border Gateway Protocol (BGP) issue: a Junos route is hidden by import policy, but the team troubleshoots only local physical interfaces. It does not explain the condition tested here.

Enterprise Routing and Switching, Professional (JNCIP-ENT) (JN0-650) Practice Tests

UP

SPECIAL OFFER: GET 10% OFF

This is ONE TIME OFFER

ExamSnap Discount Offer
Enter Your Email Address to Receive Your 10% Off Discount Code

A confirmation link will be sent to this email address to verify your login. *We value your privacy. We will not rent or sell your email address.

Download Free Demo of VCE Exam Simulator

Experience Avanset VCE Exam Simulator for yourself.

Simply submit your e-mail address below to get started with our interactive software demo of your free trial.

Free Demo Limits: In the demo version you will be able to access only first 5 questions from exam.