100% Latest & Updated Juniper JN0-650 Practice Test Questions, Exam Dumps & Verified Answers!
30 Days Free Updates, Instant Download!
Question 690
To prevent recurrence of this precise networking failure, which practice should be adopted? A carrier changes an upstream routing arrangement and a downstream Junos router detects its own AS in the advertised AS path.
- Record eBGP peer transport depth and endpoint routing in deployment templates.
- Include next-hop reachability tests in iBGP and route-reflector deployment acceptance.
- Use multivariable path-selection lab tests before changing MED-based policy.
- Monitor AS-path anomalies and validate inter-AS topology changes before enabling export.
Explanation
Correct Answer
D:Monitor AS-path anomalies and validate inter-AS topology changes before enabling export. This guards against the default BGP AS-path loop check rejects routes containing the local autonomous system to prevent loops.
Incorrect Answers
A:“Record eBGP peer transport depth and endpoint routing in deployment templates” belongs to a separate Border Gateway Protocol (BGP) issue: a transit peering is moved off directly connected interface IPs to loopbacks yet the TTL and reachability design are not updated. It does not explain the condition tested here.
B:“Include next-hop reachability tests in iBGP and route-reflector deployment acceptance” belongs to a separate Border Gateway Protocol (BGP) issue: an iBGP route is received from a reflector but hidden because its third-party next hop is unreachable in inet.0. It does not explain the condition tested here.
C:“Use multivariable path-selection lab tests before changing MED-based policy” belongs to a separate Border Gateway Protocol (BGP) issue: two equal LOCAL_PREF and AS-path candidates remain tied until MED influences the choice under the applicable comparison rules. It does not explain the condition tested here.
Question 691
Which suggested shortcut would be especially unsafe for this exact situation? A BGP export policy advertises a prefix that exists only as an inactive local candidate, despite an expectation of default active-only behavior.
- Validate every route-reflector client and failover path in topology inventory before conversion.
- Validate all required BGP address families during dual-stack peer commissioning.
- Treat advertise-inactive as a universal method to export all hidden and rejected routes.
- Include next-hop reachability tests in iBGP and route-reflector deployment acceptance.
Explanation
Correct Answer
C:The tempting alternative fails because Junos normally exports active routes; advertise-inactive can expose a best BGP candidate that lost to another protocol. The supported action is to inspect active-route selection and the advertise-inactive configuration; keep it only if the external requirement justifies it.
Incorrect Answers
A:That prevention measure relates to a route-reflector topology loses an iBGP-advertised prefix because clients are not configured under the intended reflector cluster.; it is not the unsafe shortcut described here.
B:That prevention measure relates to BGP peers exchange IPv4 NLRI correctly but a planned IPv6 customer route never appears in inet6.0.; it is not the unsafe shortcut described here.
D:That prevention measure relates to a new IPv4 BGP prefix has a valid AS path but cannot become active after the IGP stops carrying its next-hop address.; it is not the unsafe shortcut described here.
Question 692
To prevent recurrence of this precise networking failure, which practice should be adopted? A private VLAN isolated endpoint reaches the local gateway but cannot access a peer service that should be shared via a permitted promiscuous port.
- Test gateway and approved shared-service access alongside lateral isolation in PVLAN reviews.
- Track MSTP instance scale and maintain identical region parameters across participating switches.
- Version-control MSTP name, revision and VLAN mapping as one change unit.
- Document outer/inner VLAN roles and test tag stripping and preservation at service boundaries.
Explanation
Correct Answer
A:Test gateway and approved shared-service access alongside lateral isolation in PVLAN reviews. This guards against private VLAN communication depends on permitted mappings to promiscuous ports and permitted community or isolated roles.
Incorrect Answers
B:“Track MSTP instance scale and maintain identical region parameters across participating switches” belongs to a separate Ethernet Switching and Spanning Tree issue: a network uses one VLAN-wide topology but wants two forwarding trees for different groups without an instance for every VLAN. It does not explain the condition tested here.
C:“Version-control MSTP name, revision and VLAN mapping as one change unit” belongs to a separate Ethernet Switching and Spanning Tree issue: an uplink becomes a region boundary unexpectedly after an administrator changes an MSTP configuration name on only one switch. It does not explain the condition tested here.
D:“Document outer/inner VLAN roles and test tag stripping and preservation at service boundaries” belongs to a separate Ethernet Switching and Spanning Tree issue: an aggregation network sees customer VLAN IDs collide because several tenants share the same single-tagged provider infrastructure. It does not explain the condition tested here.
Question 693
A Junos enterprise team investigates this incident: A BGP export policy advertises a prefix that exists only as an inactive local candidate, despite an expectation of default active-only behavior. Which technical explanation most directly identifies the cause or design principle?
- Junos normally exports active routes; advertise-inactive can expose a best BGP candidate that lost to another protocol.
- A reachable BGP peering session does not itself make a third-party route next hop recursively resolvable.
- BGP equal-cost multipath requires appropriate configured support and matching eligible path attributes, not merely two established sessions.
- The default BGP AS-path loop check rejects routes containing the local autonomous system to prevent loops.
Explanation
Correct Answer
A:Junos normally exports active routes; advertise-inactive can expose a best BGP candidate that lost to another protocol. The appropriate response is to inspect active-route selection and the advertise-inactive configuration; keep it only if the external requirement justifies it.
Incorrect Answers
B:“A reachable BGP peering session does not itself make a third-party route next hop recursively resolvable” belongs to a separate Border Gateway Protocol (BGP) issue: a route-reflector client receives an external destination but lacks the underlay path to the advertised next hop. It does not explain the condition tested here.
C:“BGP equal-cost multipath requires appropriate configured support and matching eligible path attributes, not merely two established sessions” belongs to a separate Border Gateway Protocol (BGP) issue: equal candidate BGP routes are visible but no multipath forwarding entry is installed because eligibility or policy differs. It does not explain the condition tested here.
D:“The default BGP AS-path loop check rejects routes containing the local autonomous system to prevent loops” belongs to a separate Border Gateway Protocol (BGP) issue: the local AS appears in a received external BGP AS_PATH and the route is rejected despite valid prefix reachability. It does not explain the condition tested here.
Question 694
To prevent recurrence of this precise networking failure, which practice should be adopted? An access router has many queue definitions but unexpected class-to-queue mappings cause control traffic to be delayed.
- Validate classifier, scheduler map and interface association as a complete CoS chain.
- Plan buffer and shaping rates against provider handoff capacity and expected burst size.
- Differentiate ingress policing from egress shaping when designing bandwidth controls.
- Keep a documented forwarding-class inventory and test default mappings after service changes.
Explanation
Correct Answer
D:Keep a documented forwarding-class inventory and test default mappings after service changes. This guards against forwarding classes select output queues; an incorrect class-to-queue association can cause head-of-line delays.
Incorrect Answers
A:“Validate classifier, scheduler map and interface association as a complete CoS chain” belongs to a separate Class of Service (CoS) issue: a low-latency queue is correctly classified but voice delays because its egress scheduler map is absent from the trunk. It does not explain the condition tested here.
B:“Plan buffer and shaping rates against provider handoff capacity and expected burst size” belongs to a separate Class of Service (CoS) issue: a branch link should pace scheduled traffic to a slower uplink yet the team only drops excess packets abruptly. It does not explain the condition tested here.
C:“Differentiate ingress policing from egress shaping when designing bandwidth controls” belongs to a separate Class of Service (CoS) issue: a branch wants to enforce a traffic contract on an incoming service flow yet applies policing to an unrelated egress path. It does not explain the condition tested here.
Question 695
To prevent recurrence of this precise networking failure, which practice should be adopted? A branch wants to enforce a traffic contract on an incoming service flow yet applies policing to an unrelated egress path.
- Audit DSCP preservation and remarking at untrusted edge boundaries.
- Establish congestion thresholds and monitor starvation as part of queue-priority design.
- Document trusted-marking boundaries and test both matched and unmatched multifield traffic.
- Differentiate ingress policing from egress shaping when designing bandwidth controls.
Explanation
Correct Answer
D:Differentiate ingress policing from egress shaping when designing bandwidth controls. This guards against a policer enforces traffic rate or burst limits and can discard or mark out-of-profile input; shaping buffers traffic for paced egress.
Incorrect Answers
A:“Audit DSCP preservation and remarking at untrusted edge boundaries” belongs to a separate Class of Service (CoS) issue: a branch egress rewriter incorrectly gives bulk backups the same DSCP as real-time voice. It does not explain the condition tested here.
B:“Establish congestion thresholds and monitor starvation as part of queue-priority design” belongs to a separate Class of Service (CoS) issue: two queues use the same scheduler priority, but the business expects one to always win during contention. It does not explain the condition tested here.
C:“Document trusted-marking boundaries and test both matched and unmatched multifield traffic” belongs to a separate Class of Service (CoS) issue: a security function needs to classify a subset of traffic by source and destination criteria rather than trusted external markings. It does not explain the condition tested here.
Question 696
A network change is required for the following specific situation: An IPv6 transit prefix is hidden because its next-hop address is absent from the correct IPv6 routing table. Which corrective action is most appropriate?
- Inspect hidden-route reason, incoming attributes and import-policy decisions, then correct the authorized match.
- Inspect received communities and export policy terms, then attach a tested community match and reject rule.
- Check IPv6 next-hop reachability and inet6.0, then install a permitted IPv6 underlay route or correct next-hop policy.
- Check the advertised AS sequence and correct the peering or routing design instead of bypassing loop checks.
Explanation
Correct Answer
C:BGP next-hop resolution must use the appropriate address family; IPv4 routes do not automatically resolve IPv6 next hops. Verify this by checking that the IPv6 BGP route becomes eligible and forwards over an IPv6-resolvable next hop.
Incorrect Answers
A:“Inspect hidden-route reason, incoming attributes and import-policy decisions, then correct the authorized match” belongs to a separate Border Gateway Protocol (BGP) issue: a Junos route is hidden by import policy, but the team troubleshoots only local physical interfaces. It does not explain the condition tested here.
B:“Inspect received communities and export policy terms, then attach a tested community match and reject rule” belongs to a separate Border Gateway Protocol (BGP) issue: a network marks a customer route with a community but an export policy ignores the community, leaking the route to another peer. It does not explain the condition tested here.
D:“Check the advertised AS sequence and correct the peering or routing design instead of bypassing loop checks” belongs to a separate Border Gateway Protocol (BGP) issue: a carrier changes an upstream routing arrangement and a downstream Junos router detects its own AS in the advertised AS path. It does not explain the condition tested here.
Question 697
For this case, select TWO complementary measures or outcome checks that directly resolve the problem: Two adjacent MSTP switches show different region digests after one has a different VLAN-to-instance map.
- Both switches show compatible region membership and intended instance root/port roles.
- Compare complete region configuration on the peers and restore the approved shared MSTP region values.
- Adjust Ethernet cable speed and expect different MSTP region digests to converge automatically.
- Treat ordinary VLAN membership as equivalent to isolation between every port inside that VLAN.
- Enable ordinary Q-in-Q tagging alone and assume every customer control protocol is necessarily tunneled.
Explanation
Correct Answers
A:Both switches show compatible region membership and intended instance root/port roles. The specific steps required are to compare complete region configuration on the peers and restore the approved shared MSTP region values.
B:Compare complete region configuration on the peers and restore the approved shared MSTP region values. This addresses the dependency that MSTP region membership depends on compatible region parameters such as name, revision and VLAN-to-instance map.
Incorrect Answers
C:“Adjust Ethernet cable speed and expect different MSTP region digests to converge automatically” does not address MSTP region membership depends on compatible region parameters such as name, revision and VLAN-to-instance map.
D:“Treat ordinary VLAN membership as equivalent to isolation between every port inside that VLAN” is an unsafe response to a different problem: a shared guest access VLAN allows two untrusted hotel-room ports to communicate directly, violating the isolation design. It is not a valid fix here.
E:“Enable ordinary Q-in-Q tagging alone and assume every customer control protocol is necessarily tunneled” is an unsafe response to a different problem: a private L2 service must extend customer control protocols, yet the provider fabric consumes or drops the customer's BPDUs. It is not a valid fix here.
Question 698
Which suggested shortcut would be especially unsafe for this exact situation? A non-802.1X network printer is consistently rejected because its access port permits only EAP supplicants.
- Separate EAP silence, reject and timeout counters in authentication operational monitoring.
- Verify RADIUS attribute handling and model/release feature support before rolling out dynamic assignment.
- Classify interactive and headless endpoint requirements before choosing the access method.
- Mark every unknown MAC as trusted and give it unrestricted data-VLAN access.
Explanation
Correct Answer
D:The tempting alternative fails because MAC RADIUS provides a fallback identity mechanism for suitable non-802.1X devices, with weaker assurance than certificate-based 802.1X. The supported action is to configure supported MAC RADIUS under least-privilege policy and register the device MAC with the approved service.
Incorrect Answers
A:That prevention measure relates to a switch logs EAP timeout while the endpoint has no 802.1X supplicant, yet the operator rotates valid RADIUS passwords repeatedly.; it is not the unsafe shortcut described here.
B:That prevention measure relates to an EAP-compliant endpoint authenticates while the required policy attribute is absent or ignored in switch port authorization.; it is not the unsafe shortcut described here.
C:That prevention measure relates to a captive portal requirement is applied to a headless barcode scanner that has no web browser to follow its redirect.; it is not the unsafe shortcut described here.
Question 699
A Junos enterprise team investigates this incident: A prefix-list matches a broad aggregate but accepts unwanted subprefixes from a new external neighbor. Which technical explanation most directly identifies the cause or design principle?
- BGP typically prefers a larger LOCAL_PREF among otherwise eligible candidates before later path-selection tie breakers.
- LOCAL_PREF is an intra-AS BGP attribute, not a value routinely advertised to external BGP neighbors.
- Routing-policy term order and terminal actions determine whether later conditions are evaluated.
- BGP route filters must specify permitted exact or range-based prefix matching semantics deliberately.
Explanation
Correct Answer
D:BGP route filters must specify permitted exact or range-based prefix matching semantics deliberately. The appropriate response is to use precise route-filter match conditions and explicit rejection of unauthorized more-specific routes.
Incorrect Answers
A:“BGP typically prefers a larger LOCAL_PREF among otherwise eligible candidates before later path-selection tie breakers” belongs to a separate Border Gateway Protocol (BGP) issue: an enterprise chooses a different BGP exit after import policy assigns a higher local preference to the backup path. It does not explain the condition tested here.
B:“LOCAL_PREF is an intra-AS BGP attribute, not a value routinely advertised to external BGP neighbors” belongs to a separate Border Gateway Protocol (BGP) issue: a dual-homed site changes internal LOCAL_PREF but sees no change in the other autonomous system's inbound traffic choice. It does not explain the condition tested here.
C:“Routing-policy term order and terminal actions determine whether later conditions are evaluated” belongs to a separate Border Gateway Protocol (BGP) issue: a route with a permissive policy term is accepted before a later deny term can block it. It does not explain the condition tested here.
Question 700
The team believes it has resolved this Junos issue: A shared guest access VLAN allows two untrusted hotel-room ports to communicate directly, violating the isolation design. Which observation best verifies the specific intended result?
- Two isolated tenant ports cannot reach each other but can reach the permitted gateway uplink.
- The retired VLAN disappears from unintended trunks and valid registered VLANs remain reachable.
- The required VLAN groups follow their designated MSTI paths without per-VLAN instance explosion.
- Both switches show compatible region membership and intended instance root/port roles.
Explanation
Correct Answer
A:Two isolated tenant ports cannot reach each other but can reach the permitted gateway uplink. This checks the relevant result after inspect primary and secondary private VLAN roles and port membership; restore approved isolated/community mappings.
Incorrect Answers
B:“The retired VLAN disappears from unintended trunks and valid registered VLANs remain reachable” belongs to a separate Ethernet Switching and Spanning Tree issue: a dynamic VLAN is removed from one edge but stale MVRP registration keeps an unused VLAN active downstream. It does not explain the condition tested here.
C:“The required VLAN groups follow their designated MSTI paths without per-VLAN instance explosion” belongs to a separate Ethernet Switching and Spanning Tree issue: a network uses one VLAN-wide topology but wants two forwarding trees for different groups without an instance for every VLAN. It does not explain the condition tested here.
D:“Both switches show compatible region membership and intended instance root/port roles” belongs to a separate Ethernet Switching and Spanning Tree issue: two adjacent MSTP switches show different region digests after one has a different VLAN-to-instance map. It does not explain the condition tested here.
Enterprise Routing and Switching, Professional (JNCIP-ENT) (JN0-650) Practice Tests