Juniper JN0-650 Exam Dumps, Practice Test Questions

100% Latest & Updated Juniper JN0-650 Practice Test Questions, Exam Dumps & Verified Answers!
30 Days Free Updates, Instant Download!

Juniper JN0-650  Premium File
$54.99
$49.99

JN0-650 Premium File

  • Premium File: 107 Questions & Answers. Last update: Nov 7, 2026
  • Latest Questions
  • 100% Accurate Answers
  • Fast Exam Updates

JN0-650 Premium File

Juniper JN0-650  Premium File
  • Premium File: 107 Questions & Answers. Last update: Nov 7, 2026
  • Latest Questions
  • 100% Accurate Answers
  • Fast Exam Updates
$54.99
$49.99

Juniper JN0-650 Practice Test 71

Question 700

The team believes it has resolved this Junos issue: A shared guest access VLAN allows two untrusted hotel-room ports to communicate directly, violating the isolation design. Which observation best verifies the specific intended result?

  1. Two isolated tenant ports cannot reach each other but can reach the permitted gateway uplink.
  2. The retired VLAN disappears from unintended trunks and valid registered VLANs remain reachable.
  3. The required VLAN groups follow their designated MSTI paths without per-VLAN instance explosion.
  4. Both switches show compatible region membership and intended instance root/port roles.

Explanation

Correct Answer

A:

Two isolated tenant ports cannot reach each other but can reach the permitted gateway uplink. This checks the relevant result after inspect primary and secondary private VLAN roles and port membership; restore approved isolated/community mappings.

Incorrect Answers

B:

“The retired VLAN disappears from unintended trunks and valid registered VLANs remain reachable” belongs to a separate Ethernet Switching and Spanning Tree issue: a dynamic VLAN is removed from one edge but stale MVRP registration keeps an unused VLAN active downstream. It does not explain the condition tested here.

C:

“The required VLAN groups follow their designated MSTI paths without per-VLAN instance explosion” belongs to a separate Ethernet Switching and Spanning Tree issue: a network uses one VLAN-wide topology but wants two forwarding trees for different groups without an instance for every VLAN. It does not explain the condition tested here.

D:

“Both switches show compatible region membership and intended instance root/port roles” belongs to a separate Ethernet Switching and Spanning Tree issue: two adjacent MSTP switches show different region digests after one has a different VLAN-to-instance map. It does not explain the condition tested here.

Question 701

The team believes it has resolved this Junos issue: A fabric uses conflicting VLAN-to-VNI mappings on two leaf switches, bridging different tenant segments together. Which observation best verifies the specific intended result?

  1. BUM traffic reaches only participating VTEPs and the remote endpoint can be discovered.
  2. The expected MAC/IP binding is visible in Type 2 while multihoming and BUM state use their own route types.
  3. The current MAC location is learned and traffic reaches the moved endpoint without persistent old-VTEP forwarding.
  4. Tenant traffic reaches only its intended remote bridge domain and overlapping VLAN IDs remain isolated.

Explanation

Correct Answer

D:

Tenant traffic reaches only its intended remote bridge domain and overlapping VLAN IDs remain isolated. This checks the relevant result after compare VLAN-to-VNI and bridge-domain assignments on all leafs and correct them against the approved tenant map.

Incorrect Answers

A:

“BUM traffic reaches only participating VTEPs and the remote endpoint can be discovered” belongs to a separate EVPN issue: a bridge domain has valid unicast Type 2 entries yet remote VTEPs do not discover a new participating segment for BUM forwarding. It does not explain the condition tested here.

B:

“The expected MAC/IP binding is visible in Type 2 while multihoming and BUM state use their own route types” belongs to a separate EVPN issue: a troubleshooting team expects EVPN Ethernet auto-discovery route Type 1 to carry all host MAC/IP bindings. It does not explain the condition tested here.

C:

“The current MAC location is learned and traffic reaches the moved endpoint without persistent old-VTEP forwarding” belongs to a separate EVPN issue: a host moves between leafs and the destination leaf still forwards toward the previous MAC location. It does not explain the condition tested here.

Question 702

Which suggested shortcut would be especially unsafe for this exact situation? A route-reflector topology loses an iBGP-advertised prefix because clients are not configured under the intended reflector cluster.

  1. Review policy ordering with negative tests and explicit default actions on every change.
  2. Include show route hidden and policy term hit checks in BGP troubleshooting playbooks.
  3. Disable all iBGP loop protection and expect the route-reflector hierarchy to be unnecessary.
  4. Distinguish internal exit selection from inbound inter-AS path influence in routing design reviews.

Explanation

Correct Answer

C:

The tempting alternative fails because iBGP-learned routes are not freely re-advertised to all iBGP neighbors without appropriate reflection or topology. The supported action is to inspect reflector/client relationships and cluster behavior, then correct the intended route-reflector configuration.

Incorrect Answers

A:

That prevention measure relates to a route with a permissive policy term is accepted before a later deny term can block it.; it is not the unsafe shortcut described here.

B:

That prevention measure relates to a Junos route is hidden by import policy, but the team troubleshoots only local physical interfaces.; it is not the unsafe shortcut described here.

D:

That prevention measure relates to a dual-homed site changes internal LOCAL_PREF but sees no change in the other autonomous system's inbound traffic choice.; it is not the unsafe shortcut described here.

Question 703

The team believes it has resolved this Junos issue: Video gets dropped under congestion despite spare capacity because its queue has a too-small delay buffer. Which observation best verifies the specific intended result?

  1. Measured guest ingress usage remains within policy and permitted business traffic is unaffected.
  2. Queue depth, latency and drop statistics meet documented objectives during realistic traffic load.
  3. Controlled traffic probes pass valid bursts without permitting sustained rate violations.
  4. Only approved media streams leave with high-priority code points; backup traffic uses its designated mark.

Explanation

Correct Answer

B:

Queue depth, latency and drop statistics meet documented objectives during realistic traffic load. This checks the relevant result after review queue buffer and scheduler allocations against traffic measurements and apply a bounded adjustment.

Incorrect Answers

A:

“Measured guest ingress usage remains within policy and permitted business traffic is unaffected” belongs to a separate Class of Service (CoS) issue: a guest network should be rate-limited at ingress, but engineers configure only an egress shaper on the uplink. It does not explain the condition tested here.

C:

“Controlled traffic probes pass valid bursts without permitting sustained rate violations” belongs to a separate Class of Service (CoS) issue: a traffic policer drops small microbursts despite an acceptable average rate because its configured burst size is too tight. It does not explain the condition tested here.

D:

“Only approved media streams leave with high-priority code points; backup traffic uses its designated mark” belongs to a separate Class of Service (CoS) issue: a customer access switch trusts external CoS bits and redistributes high-priority markings to all guest traffic. It does not explain the condition tested here.

Question 704

Which suggested shortcut would be especially unsafe for this exact situation? A credential-rejected user is sent to the guest VLAN even though the planned design reserves guest VLAN for silent non-supplicants.

  1. Test captive-portal redirects, session expiry and post-login VLAN access in guest-network acceptance.
  2. Treat rejected credentials and no-supplicant detection as the same unconditional guest-access event.
  3. Separate EAP silence, reject and timeout counters in authentication operational monitoring.
  4. Monitor RADIUS reachability and validate each switch's authentication server profile during onboarding.

Explanation

Correct Answer

B:

The tempting alternative fails because guest, server-reject and server-fail outcomes represent different causes and require distinct supported policies. The supported action is to check authentication result classification and map the rejected user to an appropriate deny or reject response.

Incorrect Answers

A:

That prevention measure relates to guest users on an EX switch see no captive login page because browser HTTP redirects are not being applied on the intended VLAN.; it is not the unsafe shortcut described here.

C:

That prevention measure relates to a switch logs EAP timeout while the endpoint has no 802.1X supplicant, yet the operator rotates valid RADIUS passwords repeatedly.; it is not the unsafe shortcut described here.

D:

That prevention measure relates to a campus access interface keeps a compliant supplicant blocked while EAP requests never reach the expected authentication backend.; it is not the unsafe shortcut described here.

Question 705

A network change is required for the following specific situation: A campus mistakenly enables edge behavior on a switch-to-switch trunk and a loop appears when a backup link activates. Which corrective action is most appropriate?

  1. Remove incorrect edge treatment, validate BPDU reception and restore loop-free port roles.
  2. Inspect the ingress/egress tag-processing configuration and correct the service handoff encapsulation.
  3. Narrow the match to approved selectors and compare affected packet counters and VLAN assignment.
  4. Configure supported L2PT for the required control protocols and verify provider-edge handling.

Explanation

Correct Answer

A:

Spanning-tree edge-port assumptions are intended for non-switching endpoints, not redundant bridging connections. Verify this by checking that the redundant topology converges without sustained broadcast loops during link-failure testing.

Incorrect Answers

B:

“Inspect the ingress/egress tag-processing configuration and correct the service handoff encapsulation” belongs to a separate Ethernet Switching and Spanning Tree issue: customer traffic emerges with the provider service tag still attached and is rejected by an endpoint expecting ordinary Ethernet. It does not explain the condition tested here.

C:

“Narrow the match to approved selectors and compare affected packet counters and VLAN assignment” belongs to a separate Ethernet Switching and Spanning Tree issue: an ingress classification filter for one terminal type inadvertently redirects other hosts using the same uplink. It does not explain the condition tested here.

D:

“Configure supported L2PT for the required control protocols and verify provider-edge handling” belongs to a separate Ethernet Switching and Spanning Tree issue: a private L2 service must extend customer control protocols, yet the provider fabric consumes or drops the customer's BPDUs. It does not explain the condition tested here.

Question 706

To prevent recurrence of this precise networking failure, which practice should be adopted? Guest users on an EX switch see no captive login page because browser HTTP redirects are not being applied on the intended VLAN.

  1. Test multi-method paths including success, reject and timeout cases before deployment.
  2. Document and test EAP timeout, explicit rejection and server-unavailable cases separately.
  3. Test captive-portal redirects, session expiry and post-login VLAN access in guest-network acceptance.
  4. Review MAC-device inventory, spoofing exposure and expiry before using MAC-based authorization.

Explanation

Correct Answer

C:

Test captive-portal redirects, session expiry and post-login VLAN access in guest-network acceptance. This guards against captive portal requires a supported browser interception and authentication-to-authorization sequence.

Incorrect Answers

A:

“Test multi-method paths including success, reject and timeout cases before deployment” belongs to a separate Layer 2 Authentication and Access Control issue: two authentication methods are enabled on a shared switch port but fallback ordering bypasses a successful 802.1X result. It does not explain the condition tested here.

B:

“Document and test EAP timeout, explicit rejection and server-unavailable cases separately” belongs to a separate Layer 2 Authentication and Access Control issue: a switch assigns a misconfigured laptop with incorrect EAP credentials to a VLAN intended only for devices that never attempt 802.1X. It does not explain the condition tested here.

D:

“Review MAC-device inventory, spoofing exposure and expiry before using MAC-based authorization” belongs to a separate Layer 2 Authentication and Access Control issue: an industrial sensor lacks a supplicant but needs restricted network authorization through a centralized identity service. It does not explain the condition tested here.

Question 707

To prevent recurrence of this precise networking failure, which practice should be adopted? A branch dual-transit design sees the higher-preference provider route win even though its AS path has more hops.

  1. Include inet6-specific next-hop verification in dual-stack BGP peer checklists.
  2. Maintain expected BGP attribute decisions for every primary/secondary transit policy.
  3. Validate all required BGP address families during dual-stack peer commissioning.
  4. Review fall-through behavior with traceable policy test cases before changes reach production.

Explanation

Correct Answer

B:

Maintain expected BGP attribute decisions for every primary/secondary transit policy. This guards against for eligible BGP candidates, LOCAL_PREF comparison precedes AS-path length, so AS-path length alone does not determine the winner.

Incorrect Answers

A:

“Include inet6-specific next-hop verification in dual-stack BGP peer checklists” belongs to a separate Border Gateway Protocol (BGP) issue: an IPv6 BGP peer receives a route with an unreachable IPv6 next hop despite an otherwise valid inet6 unicast advertisement. It does not explain the condition tested here.

C:

“Validate all required BGP address families during dual-stack peer commissioning” belongs to a separate Border Gateway Protocol (BGP) issue: BGP peers exchange IPv4 NLRI correctly but a planned IPv6 customer route never appears in inet6.0. It does not explain the condition tested here.

D:

“Review fall-through behavior with traceable policy test cases before changes reach production” belongs to a separate Border Gateway Protocol (BGP) issue: a route policy lacks an explicit intended default action, and unmatched BGP prefixes behave differently than planned. It does not explain the condition tested here.

Question 708

A Junos enterprise team investigates this incident: A multicast source is active in a different PIM domain but the local ASM RP never learns the source mapping. Which technical explanation most directly identifies the cause or design principle?

  1. ASM and SSM use different membership and source-selection semantics; an SSM receiver must identify its desired sender.
  2. Source-specific multicast uses (S,G) membership semantics and generally avoids ASM rendezvous-point discovery for that flow.
  3. Multicast administrative scoping must restrict eligible groups and outgoing boundaries; group addresses alone do not impose all policy.
  4. MSDP is used in applicable ASM inter-RP designs to exchange active-source information between rendezvous points.

Explanation

Correct Answer

D:

MSDP is used in applicable ASM inter-RP designs to exchange active-source information between rendezvous points. The appropriate response is to inspect MSDP peer state and source-active information, then configure the permitted peer relationships.

Incorrect Answers

A:

“ASM and SSM use different membership and source-selection semantics; an SSM receiver must identify its desired sender” belongs to a separate IP Multicast issue: a streaming application expects a source-specific group to accept traffic from any origin, contrary to its (S,G) subscription. It does not explain the condition tested here.

B:

“Source-specific multicast uses (S,G) membership semantics and generally avoids ASM rendezvous-point discovery for that flow” belongs to a separate IP Multicast issue: a controlled one-source data feed requires group membership constrained by both source and group, not arbitrary senders. It does not explain the condition tested here.

C:

“Multicast administrative scoping must restrict eligible groups and outgoing boundaries; group addresses alone do not impose all policy” belongs to a separate IP Multicast issue: a financial multicast feed intended for one campus crosses the WAN because no boundary controls are configured. It does not explain the condition tested here.

Question 709

To prevent recurrence of this precise networking failure, which practice should be adopted? A BGP export configuration has a broad first match so a specific downstream deny never evaluates the target prefix.

  1. Record eBGP peer transport depth and endpoint routing in deployment templates.
  2. Include inet6-specific next-hop verification in dual-stack BGP peer checklists.
  3. Review policy ordering with negative tests and explicit default actions on every change.
  4. Validate all required BGP address families during dual-stack peer commissioning.

Explanation

Correct Answer

C:

Review policy ordering with negative tests and explicit default actions on every change. This guards against routing-policy term order and terminal actions determine whether later conditions are evaluated.

Incorrect Answers

A:

“Record eBGP peer transport depth and endpoint routing in deployment templates” belongs to a separate Border Gateway Protocol (BGP) issue: a transit peering is moved off directly connected interface IPs to loopbacks yet the TTL and reachability design are not updated. It does not explain the condition tested here.

B:

“Include inet6-specific next-hop verification in dual-stack BGP peer checklists” belongs to a separate Border Gateway Protocol (BGP) issue: an IPv6 BGP peer receives a route with an unreachable IPv6 next hop despite an otherwise valid inet6 unicast advertisement. It does not explain the condition tested here.

D:

“Validate all required BGP address families during dual-stack peer commissioning” belongs to a separate Border Gateway Protocol (BGP) issue: BGP peers exchange IPv4 NLRI correctly but a planned IPv6 customer route never appears in inet6.0. It does not explain the condition tested here.

Question 710

A Junos enterprise team investigates this incident: A dynamic VLAN is removed from one edge but stale MVRP registration keeps an unused VLAN active downstream. Which technical explanation most directly identifies the cause or design principle?

  1. Filter-based VLAN assignment depends on correctly matching the selected traffic and applying the filter at the right ingress point.
  2. MVRP registrations can persist where membership state or participation has not been updated consistently.
  3. Private VLAN isolated ports are designed to limit lateral L2 communication while still reaching the permitted promiscuous uplink.
  4. A private VLAN community allows permitted communication within its community; isolated behavior is stricter.

Explanation

Correct Answer

B:

MVRP registrations can persist where membership state or participation has not been updated consistently. The appropriate response is to inspect registration state and remove stale VLAN membership while preserving necessary registrations.

Incorrect Answers

A:

“Filter-based VLAN assignment depends on correctly matching the selected traffic and applying the filter at the right ingress point” belongs to a separate Ethernet Switching and Spanning Tree issue: a campus onboarding policy puts cameras on the normal data VLAN even though a targeted filter-based VLAN should steer them. It does not explain the condition tested here.

C:

“Private VLAN isolated ports are designed to limit lateral L2 communication while still reaching the permitted promiscuous uplink” belongs to a separate Ethernet Switching and Spanning Tree issue: a shared guest access VLAN allows two untrusted hotel-room ports to communicate directly, violating the isolation design. It does not explain the condition tested here.

D:

“A private VLAN community allows permitted communication within its community; isolated behavior is stricter” instead concerns another network scenario: Members of the same trusted workgroup are accidentally placed in isolated rather than community PVLAN ports and lose peer communication. It does not address the requirement here.

Enterprise Routing and Switching, Professional (JNCIP-ENT) (JN0-650) Practice Tests

UP

SPECIAL OFFER: GET 10% OFF

This is ONE TIME OFFER

ExamSnap Discount Offer
Enter Your Email Address to Receive Your 10% Off Discount Code

A confirmation link will be sent to this email address to verify your login. *We value your privacy. We will not rent or sell your email address.

Download Free Demo of VCE Exam Simulator

Experience Avanset VCE Exam Simulator for yourself.

Simply submit your e-mail address below to get started with our interactive software demo of your free trial.

Free Demo Limits: In the demo version you will be able to access only first 5 questions from exam.