Juniper JN0-650 Exam Dumps, Practice Test Questions

100% Latest & Updated Juniper JN0-650 Practice Test Questions, Exam Dumps & Verified Answers!
30 Days Free Updates, Instant Download!

Juniper JN0-650  Premium File
$54.99
$49.99

JN0-650 Premium File

  • Premium File: 107 Questions & Answers. Last update: Nov 7, 2026
  • Latest Questions
  • 100% Accurate Answers
  • Fast Exam Updates

JN0-650 Premium File

Juniper JN0-650  Premium File
  • Premium File: 107 Questions & Answers. Last update: Nov 7, 2026
  • Latest Questions
  • 100% Accurate Answers
  • Fast Exam Updates
$54.99
$49.99

Juniper JN0-650 Practice Test 73

Question 720

A Junos enterprise team investigates this incident: A voice handset fails to boot on an EX switch port after new cameras consume the remaining PoE budget. Which technical explanation most directly identifies the cause or design principle?

  1. LLDP-MED location metadata can support telephony location services and must match actual switch-port placement.
  2. PoE availability depends on the supported per-port power class and total switch power budget, not just Ethernet link status.
  3. Base LLDP discovery and LLDP-MED telephony advertisement are distinct capabilities and may require separate enablement.
  4. LLDP-MED extends device discovery with telephony-related network-policy TLVs that need compatible endpoint behavior.

Explanation

Correct Answer

B:

PoE availability depends on the supported per-port power class and total switch power budget, not just Ethernet link status. The appropriate response is to check switch PoE budget, negotiated device requirements and per-port allocation, then rebalance or provision supported power.

Incorrect Answers

A:

“LLDP-MED location metadata can support telephony location services and must match actual switch-port placement” belongs to a separate IP Telephony Features issue: an IP phone uses the wrong location information for emergency response after a switch move. It does not explain the condition tested here.

C:

“Base LLDP discovery and LLDP-MED telephony advertisement are distinct capabilities and may require separate enablement” belongs to a separate IP Telephony Features issue: a phone supports LLDP-MED but the switch sends no med TLVs after a policy template disables the feature. It does not explain the condition tested here.

D:

“LLDP-MED extends device discovery with telephony-related network-policy TLVs that need compatible endpoint behavior” belongs to a separate IP Telephony Features issue: a vendor handset discovers its neighbor using basic LLDP but does not learn the configured network policy for voice tagging. It does not explain the condition tested here.

Question 721

Which suggested shortcut would be especially unsafe for this exact situation? An emergency intercom can establish Ethernet link but loses power during activity because its PD class is not supported by that port.

  1. Include end-to-end marking tests when deploying voice VLANs and new phone models.
  2. Synchronize switchport moves with maintained emergency location records.
  3. Review LLDP-MED state and phone compliance during access-switch template audits.
  4. Assume a green Ethernet link light proves an endpoint has its required operating power.

Explanation

Correct Answer

D:

The tempting alternative fails because physical PoE delivery and negotiated device power requirements must match switch and endpoint capabilities. The supported action is to inspect PoE class, per-port priority and available chassis budget, and move to a supported powered port if needed.

Incorrect Answers

A:

That prevention measure relates to a handset follows LLDP-MED voice VLAN advertisement but sends SIP media with the wrong priority marking for the campus QoS design.; it is not the unsafe shortcut described here.

B:

That prevention measure relates to an IP phone uses the wrong location information for emergency response after a switch move.; it is not the unsafe shortcut described here.

C:

That prevention measure relates to a powered endpoint detects a Junos switch but fails to negotiate voice prioritization because only ordinary LLDP is enabled.; it is not the unsafe shortcut described here.

Question 722

The team believes it has resolved this Junos issue: An enterprise fallback design accidentally places unauthenticated users into the production network when all RADIUS servers fail. Which observation best verifies the specific intended result?

  1. The user sees a valid login prompt and receives only the approved post-login policy.
  2. During a simulated RADIUS outage, endpoints receive only the approved degraded-connectivity policy.
  3. The scanner authenticates through the approved method without any browser step, while unknown devices stay denied.
  4. The observed authentication state identifies missing supplicant response, and the approved method onboards the endpoint.

Explanation

Correct Answer

B:

During a simulated RADIUS outage, endpoints receive only the approved degraded-connectivity policy. This checks the relevant result after use a supported restricted server-fail policy and validate failure handling on the specific Junos platform.

Incorrect Answers

A:

“The user sees a valid login prompt and receives only the approved post-login policy” belongs to a separate Layer 2 Authentication and Access Control issue: guest users on an EX switch see no captive login page because browser HTTP redirects are not being applied on the intended VLAN. It does not explain the condition tested here.

C:

“The scanner authenticates through the approved method without any browser step, while unknown devices stay denied” belongs to a separate Layer 2 Authentication and Access Control issue: a noninteractive sensor is trapped in captive-portal onboarding because operators selected browser authentication for all endpoints. It does not explain the condition tested here.

D:

“The observed authentication state identifies missing supplicant response, and the approved method onboards the endpoint” belongs to a separate Layer 2 Authentication and Access Control issue: a switch logs EAP timeout while the endpoint has no 802.1X supplicant, yet the operator rotates valid RADIUS passwords repeatedly. It does not explain the condition tested here.

Question 723

Select THREE complementary corrective, verification, or preventive controls for this scenario: An IP phone uses the wrong location information for emergency response after a switch move.

  1. Increase data VLAN bandwidth as the only remedy for a handset that is not receiving enough electrical power.
  2. Update the approved location mapping and confirm transmitted LLDP-MED location information on the affected port.
  3. Synchronize switchport moves with maintained emergency location records.
  4. Declare the voice QoS requirement met solely because the handset acquired an address in the voice VLAN.
  5. The phone or location service reports the correct emergency location for the new access port.
  6. Treat the old physical room value as correct because IP addressing did not change.

Explanation

Correct Answers

B:

Correction: LLDP-MED location metadata can support telephony location services and must match actual switch-port placement.

C:

Prevention of recurrence: LLDP-MED location metadata can support telephony location services and must match actual switch-port placement.

E:

Confirmation: Update the approved location mapping and confirm transmitted LLDP-MED location information on the affected port.

Incorrect Answers

A:

“Increase data VLAN bandwidth as the only remedy for a handset that is not receiving enough electrical power” is an unsafe response to a different problem: a high-power phone intermittently reboots whenever all powered endpoints on a switch chassis start simultaneously. It is not a valid fix here.

D:

“Declare the voice QoS requirement met solely because the handset acquired an address in the voice VLAN” is an unsafe response to a different problem: a voice VLAN is configured correctly yet the switch's trust and rewrite policy fails to preserve the required phone traffic classification. It is not a valid fix here.

F:

“Treat the old physical room value as correct because IP addressing did not change” does not address LLDP-MED location metadata can support telephony location services and must match actual switch-port placement.

Question 724

Which suggested shortcut would be especially unsafe for this exact situation? A lab uses one primary VLAN for many tenants but isolated access ports can still exchange Layer 2 frames after a misconfiguration.

  1. Version-control MSTP name, revision and VLAN mapping as one change unit.
  2. Include packet-capture verification of S-tag and C-tag transformation in provider handoffs.
  3. Treat ordinary VLAN membership as equivalent to isolation between every port inside that VLAN.
  4. Track VLAN lifecycle and MVRP registration ownership as ports are decommissioned.

Explanation

Correct Answer

C:

The tempting alternative fails because private VLAN isolated ports are designed to limit lateral L2 communication while still reaching the permitted promiscuous uplink. The supported action is to inspect primary and secondary private VLAN roles and port membership; restore approved isolated/community mappings.

Incorrect Answers

A:

That prevention measure relates to two adjacent MSTP switches show different region digests after one has a different VLAN-to-instance map.; it is not the unsafe shortcut described here.

B:

That prevention measure relates to customer traffic emerges with the provider service tag still attached and is rejected by an endpoint expecting ordinary Ethernet.; it is not the unsafe shortcut described here.

D:

That prevention measure relates to a dynamic VLAN is removed from one edge but stale MVRP registration keeps an unused VLAN active downstream.; it is not the unsafe shortcut described here.

Question 725

Which suggested shortcut would be especially unsafe for this exact situation? An alternate upstream sends multicast on a path different from the router's route back to the source, causing RPF failures.

  1. Test RP failover and synchronization behavior before expanding Anycast RP.
  2. Include routed-interface PIM enrollment in the multicast deployment checklist.
  3. Turn off all RPF checking to accept duplicate or looping multicast packets from arbitrary links.
  4. Review interdomain source-advertisement scope and MSDP peer availability for ASM deployments.

Explanation

Correct Answer

C:

The tempting alternative fails because reverse Path Forwarding checks whether multicast packets arrive on the interface selected toward the source or tree root. The supported action is to inspect multicast RPF state and the routing table used for source resolution, then correct the underlay or allowed RPF selection.

Incorrect Answers

A:

That prevention measure relates to a second campus RP is deployed for availability but source-awareness synchronization is omitted where the design requires it.; it is not the unsafe shortcut described here.

B:

That prevention measure relates to a new L3 VLAN permits unicast connectivity but the PIM Hello adjacency remains absent on the active path.; it is not the unsafe shortcut described here.

D:

That prevention measure relates to a multicast source is active in a different PIM domain but the local ASM RP never learns the source mapping.; it is not the unsafe shortcut described here.

Question 726

A network change is required for the following specific situation: An ABR starts leaking a management static route into the enterprise IGP after a permissive export term was introduced. Which corrective action is most appropriate?

  1. Verify the aggregate range, component prefixes and ABR advertisements, then correct the summary policy to the approved address plan.
  2. Move OSPFv3 participation to the correct active interface and verify neighbor and IPv6 RIB state.
  3. Restrict the export policy to explicit approved route prefixes and protocols, then check external LSAs.
  4. Check IPv6 link-local addressing, OSPFv3 neighbor state and relevant ICMPv6 connectivity on the actual interface.

Explanation

Correct Answer

C:

Unrestricted OSPF export policy can originate unintended external routes, changing enterprise reachability. Verify this by checking that only authorized static prefixes appear as OSPF externals; management prefixes remain local.

Incorrect Answers

A:

“Verify the aggregate range, component prefixes and ABR advertisements, then correct the summary policy to the approved address plan” belongs to a separate Interior Gateway Protocols (IGPs) issue: a campus summarization change hides a needed subnet because the configured address range omits it. It does not explain the condition tested here.

B:

“Move OSPFv3 participation to the correct active interface and verify neighbor and IPv6 RIB state” belongs to a separate Interior Gateway Protocols (IGPs) issue: a new IPv6 peering uses OSPFv3 on a retired VLAN unit rather than the active routed transit interface. It does not explain the condition tested here.

D:

“Check IPv6 link-local addressing, OSPFv3 neighbor state and relevant ICMPv6 connectivity on the actual interface” belongs to a separate Interior Gateway Protocols (IGPs) issue: an IPv6 branch outage is misdiagnosed using only IPv4 pings, despite OSPFv3 neighbors using IPv6 link-local messaging. It does not explain the condition tested here.

Question 727

The team believes it has resolved this Junos issue: A phone-with-PC desk deployment lets the PC reach data services while the tagged voice stream is dropped by VLAN membership. Which observation best verifies the specific intended result?

  1. The phone receives stable negotiated power and the chassis stays within its supported budget under peak load.
  2. The phone or location service reports the correct emergency location for the new access port.
  3. The phone receives voice service on its tagged VLAN and the PC remains on its separate data VLAN.
  4. The handset learns the authorized voice VLAN and traffic is tagged and prioritized according to design.

Explanation

Correct Answer

C:

The phone receives voice service on its tagged VLAN and the PC remains on its separate data VLAN. This checks the relevant result after configure an approved voice VLAN on the port while keeping the PC data VLAN constrained.

Incorrect Answers

A:

“The phone receives stable negotiated power and the chassis stays within its supported budget under peak load” belongs to a separate IP Telephony Features issue: a high-power phone intermittently reboots whenever all powered endpoints on a switch chassis start simultaneously. It does not explain the condition tested here.

B:

“The phone or location service reports the correct emergency location for the new access port” belongs to a separate IP Telephony Features issue: an IP phone uses the wrong location information for emergency response after a switch move. It does not explain the condition tested here.

D:

“The handset learns the authorized voice VLAN and traffic is tagged and prioritized according to design” belongs to a separate IP Telephony Features issue: a newly deployed IP phone joins the data network because the switch does not advertise the intended voice VLAN through LLDP-MED. It does not explain the condition tested here.

Question 728

Select THREE complementary corrective, verification, or preventive controls for this scenario: An industrial sensor lacks a supplicant but needs restricted network authorization through a centralized identity service.

  1. Mark every unknown MAC as trusted and give it unrestricted data-VLAN access.
  2. The registered device is authorized with limited access; an unknown MAC remains blocked.
  3. Configure supported MAC RADIUS under least-privilege policy and register the device MAC with the approved service.
  4. Add a static DNS record and assume it substitutes for captive-portal authentication and authorization.
  5. Configure unrestricted access as the universal RADIUS-outage fallback for sensitive access ports.
  6. Review MAC-device inventory, spoofing exposure and expiry before using MAC-based authorization.

Explanation

Correct Answers

B:

Confirmation: Configure supported MAC RADIUS under least-privilege policy and register the device MAC with the approved service.

C:

Correction: MAC RADIUS provides a fallback identity mechanism for suitable non-802.1X devices, with weaker assurance than certificate-based 802.1X.

F:

Prevention of recurrence: MAC RADIUS provides a fallback identity mechanism for suitable non-802.1X devices, with weaker assurance than certificate-based 802.1X.

Incorrect Answers

A:

“Mark every unknown MAC as trusted and give it unrestricted data-VLAN access” does not address MAC RADIUS provides a fallback identity mechanism for suitable non-802.1X devices, with weaker assurance than certificate-based 802.1X.

D:

“Add a static DNS record and assume it substitutes for captive-portal authentication and authorization” is an unsafe response to a different problem: guest users on an EX switch see no captive login page because browser HTTP redirects are not being applied on the intended VLAN. It is not a valid fix here.

E:

“Configure unrestricted access as the universal RADIUS-outage fallback for sensitive access ports” is an unsafe response to a different problem: an enterprise fallback design accidentally places unauthenticated users into the production network when all RADIUS servers fail. It is not a valid fix here.

Question 729

A network change is required for the following specific situation: A business wants out-of-profile marked traffic to drop earlier than in-profile traffic within one forwarding class. Which corrective action is most appropriate?

  1. Review queue buffer and scheduler allocations against traffic measurements and apply a bounded adjustment.
  2. Apply a correctly scoped ingress policer with tested rate and burst values on the relevant flow.
  3. Map the two packet categories to the intended PLP levels and verify drop-profile response.
  4. Configure supported egress shaping at the bottleneck and verify throughput and queue behavior.

Explanation

Correct Answer

C:

Packet loss priority differentiates drop susceptibility within a forwarding class and works with the configured queue/drop behavior. Verify this by checking that during controlled congestion, out-of-profile traffic experiences earlier drops than in-profile traffic.

Incorrect Answers

A:

“Review queue buffer and scheduler allocations against traffic measurements and apply a bounded adjustment” belongs to a separate Class of Service (CoS) issue: video gets dropped under congestion despite spare capacity because its queue has a too-small delay buffer. It does not explain the condition tested here.

B:

“Apply a correctly scoped ingress policer with tested rate and burst values on the relevant flow” belongs to a separate Class of Service (CoS) issue: a branch wants to enforce a traffic contract on an incoming service flow yet applies policing to an unrelated egress path. It does not explain the condition tested here.

D:

“Configure supported egress shaping at the bottleneck and verify throughput and queue behavior” belongs to a separate Class of Service (CoS) issue: a branch link should pace scheduled traffic to a slower uplink yet the team only drops excess packets abruptly. It does not explain the condition tested here.

Question 730

For this case, select TWO complementary measures or outcome checks that directly resolve the problem: An IPv6 route learned through OSPFv3 is absent from the forwarding table because a more preferred static route covers the same prefix.

  1. Reset OSPFv3 adjacency repeatedly although the route exists as a nonactive candidate.
  2. Change only router IDs while leaving the mismatched interface areas intact.
  3. The team explains the selected active route and verifies intended failover without disturbing OSPFv3 adjacency.
  4. Inspect inet6.0 route detail and route preferences before changing OSPFv3 neighbor configuration.
  5. Make every edge interface active to OSPF regardless of whether a routing peer exists.

Explanation

Correct Answers

C:

The team explains the selected active route and verifies intended failover without disturbing OSPFv3 adjacency. The specific steps required are to inspect inet6.0 route detail and route preferences before changing OSPFv3 neighbor configuration.

D:

Inspect inet6.0 route detail and route preferences before changing OSPFv3 neighbor configuration. This addresses the dependency that protocol route advertisement and active-route selection are separate; lower route preference can select a non-OSPF candidate.

Incorrect Answers

A:

“Reset OSPFv3 adjacency repeatedly although the route exists as a nonactive candidate” does not address protocol route advertisement and active-route selection are separate; lower route preference can select a non-OSPF candidate.

B:

“Change only router IDs while leaving the mismatched interface areas intact” is an unsafe response to a different problem: a campus OSPF interface is accidentally placed in area 0 while its neighbor advertises a nonbackbone area, preventing a Full adjacency. It is not a valid fix here.

E:

“Make every edge interface active to OSPF regardless of whether a routing peer exists” is an unsafe response to a different problem: an OSPF neighbor remains Down because the routed transit interface was left passive after a site template rollout. It is not a valid fix here.

Enterprise Routing and Switching, Professional (JNCIP-ENT) (JN0-650) Practice Tests

UP

SPECIAL OFFER: GET 10% OFF

This is ONE TIME OFFER

ExamSnap Discount Offer
Enter Your Email Address to Receive Your 10% Off Discount Code

A confirmation link will be sent to this email address to verify your login. *We value your privacy. We will not rent or sell your email address.

Download Free Demo of VCE Exam Simulator

Experience Avanset VCE Exam Simulator for yourself.

Simply submit your e-mail address below to get started with our interactive software demo of your free trial.

Free Demo Limits: In the demo version you will be able to access only first 5 questions from exam.