Juniper JN0-650 Exam Dumps, Practice Test Questions

100% Latest & Updated Juniper JN0-650 Practice Test Questions, Exam Dumps & Verified Answers!
30 Days Free Updates, Instant Download!

Juniper JN0-650  Premium File
$54.99
$49.99

JN0-650 Premium File

  • Premium File: 107 Questions & Answers. Last update: Nov 7, 2026
  • Latest Questions
  • 100% Accurate Answers
  • Fast Exam Updates

JN0-650 Premium File

Juniper JN0-650  Premium File
  • Premium File: 107 Questions & Answers. Last update: Nov 7, 2026
  • Latest Questions
  • 100% Accurate Answers
  • Fast Exam Updates
$54.99
$49.99

Juniper JN0-650 Practice Test 74

Question 730

For this case, select TWO complementary measures or outcome checks that directly resolve the problem: An IPv6 route learned through OSPFv3 is absent from the forwarding table because a more preferred static route covers the same prefix.

  1. Reset OSPFv3 adjacency repeatedly although the route exists as a nonactive candidate.
  2. Change only router IDs while leaving the mismatched interface areas intact.
  3. The team explains the selected active route and verifies intended failover without disturbing OSPFv3 adjacency.
  4. Inspect inet6.0 route detail and route preferences before changing OSPFv3 neighbor configuration.
  5. Make every edge interface active to OSPF regardless of whether a routing peer exists.

Explanation

Correct Answers

C:

The team explains the selected active route and verifies intended failover without disturbing OSPFv3 adjacency. The specific steps required are to inspect inet6.0 route detail and route preferences before changing OSPFv3 neighbor configuration.

D:

Inspect inet6.0 route detail and route preferences before changing OSPFv3 neighbor configuration. This addresses the dependency that protocol route advertisement and active-route selection are separate; lower route preference can select a non-OSPF candidate.

Incorrect Answers

A:

“Reset OSPFv3 adjacency repeatedly although the route exists as a nonactive candidate” does not address protocol route advertisement and active-route selection are separate; lower route preference can select a non-OSPF candidate.

B:

“Change only router IDs while leaving the mismatched interface areas intact” is an unsafe response to a different problem: a campus OSPF interface is accidentally placed in area 0 while its neighbor advertises a nonbackbone area, preventing a Full adjacency. It is not a valid fix here.

E:

“Make every edge interface active to OSPF regardless of whether a routing peer exists” is an unsafe response to a different problem: an OSPF neighbor remains Down because the routed transit interface was left passive after a site template rollout. It is not a valid fix here.

Question 731

A network change is required for the following specific situation: A visitor portal redirects browser traffic but never releases the user to the approved network after authentication. Which corrective action is most appropriate?

  1. Consult the target release's official 802.1X support matrix and adapt the authorization design to supported methods.
  2. Select a supported multi-supplicant or appropriate phone/PC access mode and test per-device policies.
  3. Inspect switch captive portal attachment, redirect reachability and completion flow for a test guest.
  4. Configure supported MAC RADIUS under least-privilege policy and register the device MAC with the approved service.

Explanation

Correct Answer

C:

Captive portal requires a supported browser interception and authentication-to-authorization sequence. Verify this by checking that the user sees a valid login prompt and receives only the approved post-login policy.

Incorrect Answers

A:

“Consult the target release's official 802.1X support matrix and adapt the authorization design to supported methods” belongs to a separate Layer 2 Authentication and Access Control issue: an engineer copies legacy 802.1X fallback settings to a platform whose supported feature matrix excludes them. It does not explain the condition tested here.

B:

“Select a supported multi-supplicant or appropriate phone/PC access mode and test per-device policies” belongs to a separate Layer 2 Authentication and Access Control issue: an access port is placed in single-supplicant mode but a desk phone and PC must authenticate separately behind the same port. It does not explain the condition tested here.

D:

“Configure supported MAC RADIUS under least-privilege policy and register the device MAC with the approved service” belongs to a separate Layer 2 Authentication and Access Control issue: a non-802.1X network printer is consistently rejected because its access port permits only EAP supplicants. It does not explain the condition tested here.

Question 732

For this case, select TWO complementary measures or outcome checks that directly resolve the problem: A low-latency queue is correctly classified but voice delays because its egress scheduler map is absent from the trunk.

  1. Create a scheduler definition in configuration but never bind the scheduler map to egress interfaces.
  2. Raise the permitted long-term traffic rate indefinitely rather than evaluating burst-size configuration.
  3. Associate the approved scheduler map with the correct egress interface and confirm class queue counters.
  4. Assume more queues automatically improve latency even if control traffic remains mapped to a congested queue.
  5. Voice traffic receives the required scheduled service at the congested egress without starving other classes.

Explanation

Correct Answers

C:

Associate the approved scheduler map with the correct egress interface and confirm class queue counters. This addresses the dependency that egress scheduling requires the intended schedulers and their mapping to be applied on the outgoing interface.

E:

Voice traffic receives the required scheduled service at the congested egress without starving other classes. The specific steps required are to associate the approved scheduler map with the correct egress interface and confirm class queue counters.

Incorrect Answers

A:

“Create a scheduler definition in configuration but never bind the scheduler map to egress interfaces” does not address egress scheduling requires the intended schedulers and their mapping to be applied on the outgoing interface.

B:

“Raise the permitted long-term traffic rate indefinitely rather than evaluating burst-size configuration” is an unsafe response to a different problem: an uplink meets long-term bandwidth policy but legitimate short bursts exceed the token-bucket allowance. It is not a valid fix here.

D:

“Assume more queues automatically improve latency even if control traffic remains mapped to a congested queue” is an unsafe response to a different problem: an access router has many queue definitions but unexpected class-to-queue mappings cause control traffic to be delayed. It is not a valid fix here.

Question 733

A network change is required for the following specific situation: Two eBGP sessions over different transports are expected to provide ECMP but only one forwarding next hop appears. Which corrective action is most appropriate?

  1. Inspect active-route selection and the advertise-inactive configuration; keep it only if the external requirement justifies it.
  2. Put specific deny conditions before broad acceptance, and test the policy with representative routes.
  3. Compare BGP best-path and multipath eligibility conditions, then enable approved multipath behavior and validate forwarding.
  4. Use precise route-filter match conditions and explicit rejection of unauthorized more-specific routes.

Explanation

Correct Answer

C:

BGP equal-cost multipath requires appropriate configured support and matching eligible path attributes, not merely two established sessions. Verify this by checking that the routing and forwarding tables show the intended multiple next hops only for qualifying routes.

Incorrect Answers

A:

“Inspect active-route selection and the advertise-inactive configuration; keep it only if the external requirement justifies it” belongs to a separate Border Gateway Protocol (BGP) issue: an engineer adds advertise-inactive and downstream peers begin receiving a BGP route that loses to an OSPF route locally. It does not explain the condition tested here.

B:

“Put specific deny conditions before broad acceptance, and test the policy with representative routes” belongs to a separate Border Gateway Protocol (BGP) issue: a BGP export configuration has a broad first match so a specific downstream deny never evaluates the target prefix. It does not explain the condition tested here.

D:

“Use precise route-filter match conditions and explicit rejection of unauthorized more-specific routes” belongs to a separate Border Gateway Protocol (BGP) issue: an eBGP import policy unexpectedly accepts more-specific prefixes outside the approved customer allocation. It does not explain the condition tested here.

Question 734

The team believes it has resolved this Junos issue: A new IPv6 peering uses OSPFv3 on a retired VLAN unit rather than the active routed transit interface. Which observation best verifies the specific intended result?

  1. OSPF neighbor state reaches Full and the expected area LSDB receives the neighbor advertisements.
  2. An OSPFv3 neighbor forms and approved IPv6 prefixes appear in inet6.0.
  3. A designated external default appears at downstream routers without leaking unrelated static prefixes.
  4. The preferred primary route wins when healthy and the backup becomes active on a controlled failure.

Explanation

Correct Answer

B:

An OSPFv3 neighbor forms and approved IPv6 prefixes appear in inet6.0. This checks the relevant result after move OSPFv3 participation to the correct active interface and verify neighbor and IPv6 RIB state.

Incorrect Answers

A:

“OSPF neighbor state reaches Full and the expected area LSDB receives the neighbor advertisements” belongs to a separate Interior Gateway Protocols (IGPs) issue: a branch uplink uses area 0.0.0.6 on one router and area 0.0.0.9 on its peer after a template copy. It does not explain the condition tested here.

C:

“A designated external default appears at downstream routers without leaking unrelated static prefixes” belongs to a separate Interior Gateway Protocols (IGPs) issue: an OSPF export term filters routes based on the wrong protocol, so an intended static default is not originated. It does not explain the condition tested here.

D:

“The preferred primary route wins when healthy and the backup becomes active on a controlled failure” belongs to a separate Interior Gateway Protocols (IGPs) issue: an OSPF policy update redistributes a route without an appropriate external metric, shifting traffic to a slow backup. It does not explain the condition tested here.

Question 735

A network change is required for the following specific situation: A prefix-list matches a broad aggregate but accepts unwanted subprefixes from a new external neighbor. Which corrective action is most appropriate?

  1. Use precise route-filter match conditions and explicit rejection of unauthorized more-specific routes.
  2. Inspect received communities and export policy terms, then attach a tested community match and reject rule.
  3. Inspect reflector/client relationships and cluster behavior, then correct the intended route-reflector configuration.
  4. Select a permitted inbound traffic-engineering mechanism with the provider, such as suitable AS-path prepending or agreed communities.

Explanation

Correct Answer

A:

BGP route filters must specify permitted exact or range-based prefix matching semantics deliberately. Verify this by checking that allowed customer prefixes are received while unauthorized longer prefixes are absent from accepted routes.

Incorrect Answers

B:

“Inspect received communities and export policy terms, then attach a tested community match and reject rule” belongs to a separate Border Gateway Protocol (BGP) issue: a provider-facing policy stops honoring a route-tag community after a new import policy changes the attached communities. It does not explain the condition tested here.

C:

“Inspect reflector/client relationships and cluster behavior, then correct the intended route-reflector configuration” belongs to a separate Border Gateway Protocol (BGP) issue: a route-reflector topology loses an iBGP-advertised prefix because clients are not configured under the intended reflector cluster. It does not explain the condition tested here.

D:

“Select a permitted inbound traffic-engineering mechanism with the provider, such as suitable AS-path prepending or agreed communities” belongs to a separate Border Gateway Protocol (BGP) issue: a dual-homed site changes internal LOCAL_PREF but sees no change in the other autonomous system's inbound traffic choice. It does not explain the condition tested here.

Question 736

A Junos enterprise team investigates this incident: A printer's MAC address is duplicated by an unauthorized endpoint that obtains the same weak MAC-based policy. Which technical explanation most directly identifies the cause or design principle?

  1. Authentication success and postauthentication VLAN/policy assignment are separate stages whose feature support may vary.
  2. Supplicant absence is a distinct failure from an invalid credential or unreachable authentication server.
  3. 802.1X guest and fallback capabilities are platform and Junos variant specific; unsupported features must not be assumed.
  4. MAC-based identity is tied to the observed hardware address and can be spoofed; it is not strong user authentication.

Explanation

Correct Answer

D:

MAC-based identity is tied to the observed hardware address and can be spoofed; it is not strong user authentication. The appropriate response is to confirm the actual device and approved MAC record, then restrict the resulting authorization and add compensating controls.

Incorrect Answers

A:

“Authentication success and postauthentication VLAN/policy assignment are separate stages whose feature support may vary” belongs to a separate Layer 2 Authentication and Access Control issue: an EAP-compliant endpoint authenticates while the required policy attribute is absent or ignored in switch port authorization. It does not explain the condition tested here.

B:

“Supplicant absence is a distinct failure from an invalid credential or unreachable authentication server” belongs to a separate Layer 2 Authentication and Access Control issue: a switch logs EAP timeout while the endpoint has no 802.1X supplicant, yet the operator rotates valid RADIUS passwords repeatedly. It does not explain the condition tested here.

C:

“802.1X guest and fallback capabilities are platform and Junos variant specific; unsupported features must not be assumed” belongs to a separate Layer 2 Authentication and Access Control issue: an access switch is moved to Junos OS Evolved but the team assumes every earlier guest-VLAN feature still exists on L2 802.1X interfaces. It does not explain the condition tested here.

Question 737

Select THREE complementary corrective, verification, or preventive controls for this scenario: A switch rollout splits a team that should communicate within one PVLAN community, while protecting it from another community.

  1. Adjust Ethernet cable speed and expect different MSTP region digests to converge automatically.
  2. Enable ordinary Q-in-Q tagging alone and assume every customer control protocol is necessarily tunneled.
  3. Community members can communicate as intended while cross-community access remains blocked.
  4. Make every tenant port promiscuous simply to restore one workgroup's access.
  5. Document primary/secondary VLAN mappings and test permitted peer groups and isolation boundaries.
  6. Map the trusted endpoints to the proper community secondary VLAN and keep other groups segregated.

Explanation

Correct Answers

C:

Confirmation: Map the trusted endpoints to the proper community secondary VLAN and keep other groups segregated.

E:

Prevention of recurrence: A private VLAN community allows permitted communication within its community; isolated behavior is stricter.

F:

Correction: A private VLAN community allows permitted communication within its community; isolated behavior is stricter.

Incorrect Answers

A:

“Adjust Ethernet cable speed and expect different MSTP region digests to converge automatically” is an unsafe response to a different problem: an uplink becomes a region boundary unexpectedly after an administrator changes an MSTP configuration name on only one switch. It is not a valid fix here.

B:

“Enable ordinary Q-in-Q tagging alone and assume every customer control protocol is necessarily tunneled” is an unsafe response to a different problem: a private L2 service must extend customer control protocols, yet the provider fabric consumes or drops the customer's BPDUs. It is not a valid fix here.

D:

“Make every tenant port promiscuous simply to restore one workgroup's access” does not address a private VLAN community allows permitted communication within its community; isolated behavior is stricter.

Question 738

A network change is required for the following specific situation: An iBGP route is received from a reflector but hidden because its third-party next hop is unreachable in inet.0. Which corrective action is most appropriate?

  1. Verify endpoint reachability and configure appropriate multihop session parameters and security controls.
  2. Restore permitted next-hop reachability via IGP or adjust next-hop policy where appropriate; recheck route detail.
  3. Use precise route-filter match conditions and explicit rejection of unauthorized more-specific routes.
  4. Check the advertised AS sequence and correct the peering or routing design instead of bypassing loop checks.

Explanation

Correct Answer

B:

BGP route selection first requires the BGP next hop to resolve through the appropriate routing table. Verify this by checking that the previously hidden BGP prefix resolves its next hop and becomes an eligible route.

Incorrect Answers

A:

“Verify endpoint reachability and configure appropriate multihop session parameters and security controls” belongs to a separate Border Gateway Protocol (BGP) issue: a transit peering is moved off directly connected interface IPs to loopbacks yet the TTL and reachability design are not updated. It does not explain the condition tested here.

C:

“Use precise route-filter match conditions and explicit rejection of unauthorized more-specific routes” belongs to a separate Border Gateway Protocol (BGP) issue: a prefix-list matches a broad aggregate but accepts unwanted subprefixes from a new external neighbor. It does not explain the condition tested here.

D:

“Check the advertised AS sequence and correct the peering or routing design instead of bypassing loop checks” belongs to a separate Border Gateway Protocol (BGP) issue: the local AS appears in a received external BGP AS_PATH and the route is rejected despite valid prefix reachability. It does not explain the condition tested here.

Question 739

The team believes it has resolved this Junos issue: A stream uses asymmetric unicast routing; multicast forwarding fails intermittently although individual host routes work. Which observation best verifies the specific intended result?

  1. The specified groups remain within the approved scope while unrelated enterprise multicast flows continue.
  2. RPF counters and expected (S,G) forwarding stabilize after the route change.
  3. Backbone utilization reflects one upstream multicast copy per tree branch while interested receivers obtain the stream.
  4. Remote ASM receivers can discover the intended source and request multicast delivery through the proper tree.

Explanation

Correct Answer

B:

RPF counters and expected (S,G) forwarding stabilize after the route change. This checks the relevant result after compare source-route preference with actual multicast ingress and restore a consistent authorized upstream path.

Incorrect Answers

A:

“The specified groups remain within the approved scope while unrelated enterprise multicast flows continue” belongs to a separate IP Multicast issue: a laboratory's multicast test group leaks to the corporate backbone despite a requirement to keep it within the lab. It does not explain the condition tested here.

C:

“Backbone utilization reflects one upstream multicast copy per tree branch while interested receivers obtain the stream” belongs to a separate IP Multicast issue: a trading-data sender needs to serve many local subscribers, but each listener receives its own redundant copy over the backbone. It does not explain the condition tested here.

D:

“Remote ASM receivers can discover the intended source and request multicast delivery through the proper tree” belongs to a separate IP Multicast issue: a multicast source is active in a different PIM domain but the local ASM RP never learns the source mapping. It does not explain the condition tested here.

Question 740

Which suggested shortcut would be especially unsafe for this exact situation? A voice handset fails to boot on an EX switch port after new cameras consume the remaining PoE budget.

  1. Review LLDP-MED state and phone compliance during access-switch template audits.
  2. Increase data VLAN bandwidth as the only remedy for a handset that is not receiving enough electrical power.
  3. Test both tagged phone frames and untagged PC frames during phone-port commissioning.
  4. Include LLDP-MED capabilities and network-policy TLVs in phone-vendor acceptance testing.

Explanation

Correct Answer

B:

The tempting alternative fails because PoE availability depends on the supported per-port power class and total switch power budget, not just Ethernet link status. The supported action is to check switch PoE budget, negotiated device requirements and per-port allocation, then rebalance or provision supported power.

Incorrect Answers

A:

That prevention measure relates to a phone supports LLDP-MED but the switch sends no med TLVs after a policy template disables the feature.; it is not the unsafe shortcut described here.

C:

That prevention measure relates to a desk phone sends tagged voice traffic, but the switchport permits only the untagged data VLAN.; it is not the unsafe shortcut described here.

D:

That prevention measure relates to a vendor handset discovers its neighbor using basic LLDP but does not learn the configured network policy for voice tagging.; it is not the unsafe shortcut described here.

Enterprise Routing and Switching, Professional (JNCIP-ENT) (JN0-650) Practice Tests

UP

SPECIAL OFFER: GET 10% OFF

This is ONE TIME OFFER

ExamSnap Discount Offer
Enter Your Email Address to Receive Your 10% Off Discount Code

A confirmation link will be sent to this email address to verify your login. *We value your privacy. We will not rent or sell your email address.

Download Free Demo of VCE Exam Simulator

Experience Avanset VCE Exam Simulator for yourself.

Simply submit your e-mail address below to get started with our interactive software demo of your free trial.

Free Demo Limits: In the demo version you will be able to access only first 5 questions from exam.