Juniper JN0-650 Exam Dumps, Practice Test Questions

100% Latest & Updated Juniper JN0-650 Practice Test Questions, Exam Dumps & Verified Answers!
30 Days Free Updates, Instant Download!

Juniper JN0-650  Premium File
$54.99
$49.99

JN0-650 Premium File

  • Premium File: 107 Questions & Answers. Last update: Nov 7, 2026
  • Latest Questions
  • 100% Accurate Answers
  • Fast Exam Updates

JN0-650 Premium File

Juniper JN0-650  Premium File
  • Premium File: 107 Questions & Answers. Last update: Nov 7, 2026
  • Latest Questions
  • 100% Accurate Answers
  • Fast Exam Updates
$54.99
$49.99

Juniper JN0-650 Practice Test 87

Question 860

The team believes it has resolved this Junos issue: A noninteractive sensor is trapped in captive-portal onboarding because operators selected browser authentication for all endpoints. Which observation best verifies the specific intended result?

  1. The switch reports an authorized session with the intended VLAN and access policy.
  2. The scanner authenticates through the approved method without any browser step, while unknown devices stay denied.
  3. A known-good supplicant completes EAP/RADIUS authentication and the port reaches its intended authorized state.
  4. A nonresponding guest gets its intended limited VLAN while invalid credentials never receive guest privilege.

Explanation

Correct Answer

B:

The scanner authenticates through the approved method without any browser step, while unknown devices stay denied. This checks the relevant result after choose a documented compatible nonbrowser method such as supported MAC RADIUS under narrow access controls.

Incorrect Answers

A:

“The switch reports an authorized session with the intended VLAN and access policy” belongs to a separate Layer 2 Authentication and Access Control issue: an EAP-compliant endpoint authenticates while the required policy attribute is absent or ignored in switch port authorization. It does not explain the condition tested here.

C:

“A known-good supplicant completes EAP/RADIUS authentication and the port reaches its intended authorized state” belongs to a separate Layer 2 Authentication and Access Control issue: a campus access interface keeps a compliant supplicant blocked while EAP requests never reach the expected authentication backend. It does not explain the condition tested here.

D:

“A nonresponding guest gets its intended limited VLAN while invalid credentials never receive guest privilege” belongs to a separate Layer 2 Authentication and Access Control issue: a credential-rejected user is sent to the guest VLAN even though the planned design reserves guest VLAN for silent non-supplicants. It does not explain the condition tested here.

Question 861

A Junos enterprise team investigates this incident: An engineer incorrectly assumes a lower MED overrides a larger LOCAL_PREF, when both transit candidates are eligible. Which technical explanation most directly identifies the cause or design principle?

  1. BGP address-family negotiation controls which IPv4 or IPv6 NLRI can be exchanged independently of session state.
  2. BGP next-hop resolution must use the appropriate address family; IPv4 routes do not automatically resolve IPv6 next hops.
  3. MED has lower precedence than LOCAL_PREF and AS-path in common BGP best-path selection and must be compared under supported conditions.
  4. BGP route selection first requires the BGP next hop to resolve through the appropriate routing table.

Explanation

Correct Answer

C:

MED has lower precedence than LOCAL_PREF and AS-path in common BGP best-path selection and must be compared under supported conditions. The appropriate response is to read all relevant candidate attributes and apply policy consistent with intended tie-breaker precedence.

Incorrect Answers

A:

“BGP address-family negotiation controls which IPv4 or IPv6 NLRI can be exchanged independently of session state” belongs to a separate Border Gateway Protocol (BGP) issue: a campus router's BGP IPv6 session is Established yet peers advertise only inet unicast family routes. It does not explain the condition tested here.

B:

“BGP next-hop resolution must use the appropriate address family; IPv4 routes do not automatically resolve IPv6 next hops” belongs to a separate Border Gateway Protocol (BGP) issue: an IPv6 transit prefix is hidden because its next-hop address is absent from the correct IPv6 routing table. It does not explain the condition tested here.

D:

“BGP route selection first requires the BGP next hop to resolve through the appropriate routing table” belongs to a separate Border Gateway Protocol (BGP) issue: a new IPv4 BGP prefix has a valid AS path but cannot become active after the IGP stops carrying its next-hop address. It does not explain the condition tested here.

Question 862

The team believes it has resolved this Junos issue: An OSPF policy update redistributes a route without an appropriate external metric, shifting traffic to a slow backup. Which observation best verifies the specific intended result?

  1. Neighbor states and DR/BDR assignments match the approved design following a managed election.
  2. The preferred primary route wins when healthy and the backup becomes active on a controlled failure.
  3. The backbone receives the intended aggregate and routers can reach all included component subnets.
  4. Stable Hellos and Full neighbor state persist through repeated protocol interval checks.

Explanation

Correct Answer

B:

The preferred primary route wins when healthy and the backup becomes active on a controlled failure. This checks the relevant result after review external metric type and value at the originator, then apply the documented traffic-engineering policy.

Incorrect Answers

A:

“Neighbor states and DR/BDR assignments match the approved design following a managed election” belongs to a separate Interior Gateway Protocols (IGPs) issue: an aggregation broadcast VLAN has a DR/BDR placement that conflicts with the approved design after a maintenance reboot. It does not explain the condition tested here.

C:

“The backbone receives the intended aggregate and routers can reach all included component subnets” belongs to a separate Interior Gateway Protocols (IGPs) issue: an ABR stops advertising a branch prefix into the backbone after an OSPF area-range summary is configured incorrectly. It does not explain the condition tested here.

D:

“Stable Hellos and Full neighbor state persist through repeated protocol interval checks” belongs to a separate Interior Gateway Protocols (IGPs) issue: two OSPF routers on a shared transit segment report different Hello and dead intervals and never establish adjacency. It does not explain the condition tested here.

Question 863

The team believes it has resolved this Junos issue: A streaming application expects a source-specific group to accept traffic from any origin, contrary to its (S,G) subscription. Which observation best verifies the specific intended result?

  1. Subscribed receivers get the stream without unnecessary flood to ports that did not join.
  2. The required PIM neighbors appear and downstream join state tracks active interested receivers.
  3. The selected upstream RPF neighbor and packet arrival interface agree, restoring intended multicast flow.
  4. Only the specified source delivers data to receivers of the chosen SSM group.

Explanation

Correct Answer

D:

Only the specified source delivers data to receivers of the chosen SSM group. This checks the relevant result after update receiver memberships to use the approved source and group, and validate end-to-end (S,G) trees.

Incorrect Answers

A:

“Subscribed receivers get the stream without unnecessary flood to ports that did not join” belongs to a separate IP Multicast issue: an access VLAN floods every multicast packet because IGMP snooping state was lost during migration. It does not explain the condition tested here.

B:

“The required PIM neighbors appear and downstream join state tracks active interested receivers” belongs to a separate IP Multicast issue: a new L3 VLAN permits unicast connectivity but the PIM Hello adjacency remains absent on the active path. It does not explain the condition tested here.

C:

“The selected upstream RPF neighbor and packet arrival interface agree, restoring intended multicast flow” belongs to a separate IP Multicast issue: a multicast team changes unicast routing yet an engineered multicast RPF table still points to an obsolete next hop. It does not explain the condition tested here.

Question 864

A Junos enterprise team investigates this incident: Guest users on an EX switch see no captive login page because browser HTTP redirects are not being applied on the intended VLAN. Which technical explanation most directly identifies the cause or design principle?

  1. Authentication success and postauthentication VLAN/policy assignment are separate stages whose feature support may vary.
  2. Supplicant absence is a distinct failure from an invalid credential or unreachable authentication server.
  3. Captive portal requires a supported browser interception and authentication-to-authorization sequence.
  4. Server-fail fallback must be an explicitly scoped authorization policy; availability cannot justify unbounded access.

Explanation

Correct Answer

C:

Captive portal requires a supported browser interception and authentication-to-authorization sequence. The appropriate response is to inspect switch captive portal attachment, redirect reachability and completion flow for a test guest.

Incorrect Answers

A:

“Authentication success and postauthentication VLAN/policy assignment are separate stages whose feature support may vary” belongs to a separate Layer 2 Authentication and Access Control issue: a switch receives successful RADIUS Access-Accept but the user still lands in an unexpected VLAN because the dynamic assignment is not supported on that platform. It does not explain the condition tested here.

B:

“Supplicant absence is a distinct failure from an invalid credential or unreachable authentication server” belongs to a separate Layer 2 Authentication and Access Control issue: a RADIUS server reports no Access-Request for a silent legacy terminal, while switch timers show no EAP response. It does not explain the condition tested here.

D:

“Server-fail fallback must be an explicitly scoped authorization policy; availability cannot justify unbounded access” belongs to a separate Layer 2 Authentication and Access Control issue: after a RADIUS outage, the access switch opens ports broadly instead of applying the approved restricted server-fail VLAN. It does not explain the condition tested here.

Question 865

For this case, select TWO complementary measures or outcome checks that directly resolve the problem: An OSPF policy update redistributes a route without an appropriate external metric, shifting traffic to a slow backup.

  1. Review external metric type and value at the originator, then apply the documented traffic-engineering policy.
  2. Record a successful IPv4 echo response as conclusive proof that OSPFv3 is healthy.
  3. Raise interface OSPF costs without resolving the duplicated router IDs.
  4. Increase every external metric blindly without checking which path should win.
  5. The preferred primary route wins when healthy and the backup becomes active on a controlled failure.

Explanation

Correct Answers

A:

Review external metric type and value at the originator, then apply the documented traffic-engineering policy. This addresses the dependency that OSPF external route costs and metric types affect path choice and must reflect intended topology and failover behavior.

E:

The preferred primary route wins when healthy and the backup becomes active on a controlled failure. The specific steps required are to review external metric type and value at the originator, then apply the documented traffic-engineering policy.

Incorrect Answers

B:

“Record a successful IPv4 echo response as conclusive proof that OSPFv3 is healthy” is an unsafe response to a different problem: an OSPFv3 adjacency on a dual-stack campus changes state because engineers treat IPv4 interface reachability as proof of IPv6 control-plane health. It is not a valid fix here.

C:

“Raise interface OSPF costs without resolving the duplicated router IDs” is an unsafe response to a different problem: a router's OSPF neighbor restarts repeatedly because duplicate router IDs were assigned to different routing nodes. It is not a valid fix here.

D:

“Increase every external metric blindly without checking which path should win” does not address OSPF external route costs and metric types affect path choice and must reflect intended topology and failover behavior.

Question 866

To prevent recurrence of this precise networking failure, which practice should be adopted? A campus mistakenly enables edge behavior on a switch-to-switch trunk and a loop appears when a backup link activates.

  1. Audit edge classifications and apply appropriate BPDU protection on true client-facing ports.
  2. Include MVRP adjacency and registration checks in trunk-change reviews.
  3. Maintain representative match and nonmatch tests for filter-based VLAN policies.
  4. Include packet-capture verification of S-tag and C-tag transformation in provider handoffs.

Explanation

Correct Answer

A:

Audit edge classifications and apply appropriate BPDU protection on true client-facing ports. This guards against spanning-tree edge-port assumptions are intended for non-switching endpoints, not redundant bridging connections.

Incorrect Answers

B:

“Include MVRP adjacency and registration checks in trunk-change reviews” belongs to a separate Ethernet Switching and Spanning Tree issue: a shared uplink carries dynamically registered VLANs until one device has MVRP disabled during an upgrade. It does not explain the condition tested here.

C:

“Maintain representative match and nonmatch tests for filter-based VLAN policies” belongs to a separate Ethernet Switching and Spanning Tree issue: a campus onboarding policy puts cameras on the normal data VLAN even though a targeted filter-based VLAN should steer them. It does not explain the condition tested here.

D:

“Include packet-capture verification of S-tag and C-tag transformation in provider handoffs” belongs to a separate Ethernet Switching and Spanning Tree issue: a Q-in-Q service works across transport but the far-end access handoff presents unexpected double tags. It does not explain the condition tested here.

Question 867

To prevent recurrence of this precise networking failure, which practice should be adopted? A route policy lacks an explicit intended default action, and unmatched BGP prefixes behave differently than planned.

  1. Include inet6-specific next-hop verification in dual-stack BGP peer checklists.
  2. Validate all required BGP address families during dual-stack peer commissioning.
  3. Test expected best-path behavior before modifying LOCAL_PREF across internal peers.
  4. Review fall-through behavior with traceable policy test cases before changes reach production.

Explanation

Correct Answer

D:

Review fall-through behavior with traceable policy test cases before changes reach production. This guards against routing-policy evaluation depends on term matches, flow-control actions and the policy chain, including what happens on no match.

Incorrect Answers

A:

“Include inet6-specific next-hop verification in dual-stack BGP peer checklists” belongs to a separate Border Gateway Protocol (BGP) issue: an IPv6 BGP peer receives a route with an unreachable IPv6 next hop despite an otherwise valid inet6 unicast advertisement. It does not explain the condition tested here.

B:

“Validate all required BGP address families during dual-stack peer commissioning” belongs to a separate Border Gateway Protocol (BGP) issue: BGP peers exchange IPv4 NLRI correctly but a planned IPv6 customer route never appears in inet6.0. It does not explain the condition tested here.

C:

“Test expected best-path behavior before modifying LOCAL_PREF across internal peers” instead concerns another network scenario: Two iBGP exits offer equal reachable routes but the one with higher LOCAL_PREF is not the egress an operator expected. It does not address the requirement here.

Question 868

Select THREE complementary corrective, verification, or preventive controls for this scenario: A campus summarization change hides a needed subnet because the configured address range omits it.

  1. Increase every external metric blindly without checking which path should win.
  2. Verify the aggregate range, component prefixes and ABR advertisements, then correct the summary policy to the approved address plan.
  3. The backbone receives the intended aggregate and routers can reach all included component subnets.
  4. Configure IPv4 OSPFv2 alone and expect it to populate IPv6 unicast routes automatically.
  5. Advertise an arbitrary wide aggregate that includes unrelated networks to make the missing route disappear.
  6. Run prefix-boundary tests before enabling area aggregation on an ABR.

Explanation

Correct Answers

B:

Correction: Area summarization scope must correctly cover the intended component networks; the wrong range can suppress or misrepresent reachability.

C:

Confirmation: Verify the aggregate range, component prefixes and ABR advertisements, then correct the summary policy to the approved address plan.

F:

Prevention of recurrence: Area summarization scope must correctly cover the intended component networks; the wrong range can suppress or misrepresent reachability.

Incorrect Answers

A:

“Increase every external metric blindly without checking which path should win” is an unsafe response to a different problem: a branch receives two external paths with different metric-type assumptions after a policy change and prefers the wrong exit. It is not a valid fix here.

D:

“Configure IPv4 OSPFv2 alone and expect it to populate IPv6 unicast routes automatically” is an unsafe response to a different problem: an IPv6-only branch has OSPFv3 Hellos on the wrong logical unit after interface renumbering, so no IPv6 routes appear. It is not a valid fix here.

E:

“Advertise an arbitrary wide aggregate that includes unrelated networks to make the missing route disappear” does not address area summarization scope must correctly cover the intended component networks; the wrong range can suppress or misrepresent reachability.

Question 869

A network change is required for the following specific situation: An ASM video distribution has valid listener memberships yet PIM joins never converge toward the configured RP. Which corrective action is most appropriate?

  1. Update receiver memberships to use the approved source and group, and validate end-to-end (S,G) trees.
  2. Select an appropriate SSM group range and verify source-specific IGMPv3/PIM signaling on the supported platform.
  3. Check group-to-RP mapping and RP reachability, then repair the RP discovery or explicit mapping.
  4. Configure group-aware multicast routing policy and boundary filters at intended exits, then verify forwarding.

Explanation

Correct Answer

C:

PIM sparse-mode ASM builds shared-tree state toward a reachable RP, and an incorrect RP mapping can prevent service. Verify this by checking that PIM joins build the intended shared tree and the requested group begins forwarding to subscribers.

Incorrect Answers

A:

“Update receiver memberships to use the approved source and group, and validate end-to-end (S,G) trees” belongs to a separate IP Multicast issue: a campus multicast application migrates ASM clients to SSM but does not update the source-qualified membership requests. It does not explain the condition tested here.

B:

“Select an appropriate SSM group range and verify source-specific IGMPv3/PIM signaling on the supported platform” belongs to a separate IP Multicast issue: a video source is known and receivers support IGMPv3, but engineers configure ASM and an RP unnecessarily for the source-specific application. It does not explain the condition tested here.

D:

“Configure group-aware multicast routing policy and boundary filters at intended exits, then verify forwarding” belongs to a separate IP Multicast issue: a financial multicast feed intended for one campus crosses the WAN because no boundary controls are configured. It does not explain the condition tested here.

Question 870

To prevent recurrence of this precise networking failure, which practice should be adopted? A shared guest access VLAN allows two untrusted hotel-room ports to communicate directly, violating the isolation design.

  1. Test each critical VLAN's root bridge and forwarding path after VSTP updates.
  2. Test private-port isolation and uplink reachability after access topology changes.
  3. Include MVRP adjacency and registration checks in trunk-change reviews.
  4. Scope and monitor tunneled L2 control protocols to prevent control-plane abuse.

Explanation

Correct Answer

B:

Test private-port isolation and uplink reachability after access topology changes. This guards against private VLAN isolated ports are designed to limit lateral L2 communication while still reaching the permitted promiscuous uplink.

Incorrect Answers

A:

“Test each critical VLAN's root bridge and forwarding path after VSTP updates” belongs to a separate Ethernet Switching and Spanning Tree issue: a VSTP network intended to send voice and data VLANs over different active paths instead blocks both on the same uplink. It does not explain the condition tested here.

C:

“Include MVRP adjacency and registration checks in trunk-change reviews” belongs to a separate Ethernet Switching and Spanning Tree issue: a new switch automatically discovers VLAN registrations on one trunk, but an intermediate trunk lacks MVRP participation and blocks the VLAN. It does not explain the condition tested here.

D:

“Scope and monitor tunneled L2 control protocols to prevent control-plane abuse” belongs to a separate Ethernet Switching and Spanning Tree issue: an 802.1Q trunk carries customer data through a provider Ethernet segment but fails to forward the required spanning-tree control frames transparently. It does not explain the condition tested here.

Enterprise Routing and Switching, Professional (JNCIP-ENT) (JN0-650) Practice Tests

UP

SPECIAL OFFER: GET 10% OFF

This is ONE TIME OFFER

ExamSnap Discount Offer
Enter Your Email Address to Receive Your 10% Off Discount Code

A confirmation link will be sent to this email address to verify your login. *We value your privacy. We will not rent or sell your email address.

Download Free Demo of VCE Exam Simulator

Experience Avanset VCE Exam Simulator for yourself.

Simply submit your e-mail address below to get started with our interactive software demo of your free trial.

Free Demo Limits: In the demo version you will be able to access only first 5 questions from exam.