100% Latest & Updated Juniper JN0-650 Practice Test Questions, Exam Dumps & Verified Answers!
30 Days Free Updates, Instant Download!
Question 850
For this case, select TWO complementary measures or outcome checks that directly resolve the problem: An OSPF export term filters routes based on the wrong protocol, so an intended static default is not originated.
- Restart the entire OSPFv2 process and assume this fixes a missing OSPFv3 loopback.
- Inspect the active local default and export term conditions; match only the authorized static default source.
- A designated external default appears at downstream routers without leaking unrelated static prefixes.
- Configure IPv4 OSPFv2 alone and expect it to populate IPv6 unicast routes automatically.
- Add a catch-all accept at the end of the policy to bypass the source-type error.
Explanation
Correct Answers
B:Inspect the active local default and export term conditions; match only the authorized static default source. This addresses the dependency that routing-policy match criteria must align with the source route type and the intended OSPF export behavior.
C:A designated external default appears at downstream routers without leaking unrelated static prefixes. The specific steps required are to inspect the active local default and export term conditions; match only the authorized static default source.
Incorrect Answers
A:“Restart the entire OSPFv2 process and assume this fixes a missing OSPFv3 loopback” is an unsafe response to a different problem: OSPFv3 peering comes up but the desired IPv6 loopback is not in the routing database after a rollout. It is not a valid fix here.
D:“Configure IPv4 OSPFv2 alone and expect it to populate IPv6 unicast routes automatically” is an unsafe response to a different problem: an IPv6-only branch has OSPFv3 Hellos on the wrong logical unit after interface renumbering, so no IPv6 routes appear. It is not a valid fix here.
E:“Add a catch-all accept at the end of the policy to bypass the source-type error” does not address routing-policy match criteria must align with the source route type and the intended OSPF export behavior.
Question 851
For this case, select TWO complementary measures or outcome checks that directly resolve the problem: Voice packets arrive with DSCP EF but are placed into the best-effort queue after a new access interface template is applied.
- Apply an approved behavior-aggregate classifier with the intended DSCP-to-class mapping on the real ingress interface.
- Configure egress rewriting alone and assume it classifies all incoming traffic into voice queues.
- Assume any policing rule provides the same paced, buffered behavior as egress shaping.
- Observed queue counters show voice packets in the designated forwarding class after classification.
- Assume a correct internal forwarding class guarantees outgoing DSCP is preserved without rewrite policy.
Explanation
Correct Answers
A:Apply an approved behavior-aggregate classifier with the intended DSCP-to-class mapping on the real ingress interface. This addresses the dependency that Junos ingress classifiers map packet header code points to forwarding classes and packet loss priority, subject to interface attachment.
D:Observed queue counters show voice packets in the designated forwarding class after classification. The specific steps required are to apply an approved behavior-aggregate classifier with the intended DSCP-to-class mapping on the real ingress interface.
Incorrect Answers
B:“Configure egress rewriting alone and assume it classifies all incoming traffic into voice queues” does not address Junos ingress classifiers map packet header code points to forwarding classes and packet loss priority, subject to interface attachment.
C:“Assume any policing rule provides the same paced, buffered behavior as egress shaping” is an unsafe response to a different problem: a WAN customer requires smooth outbound transmission but an ingress drop policer creates unnecessary burst loss. It is not a valid fix here.
E:“Assume a correct internal forwarding class guarantees outgoing DSCP is preserved without rewrite policy” is an unsafe response to a different problem: a boundary router classifies EF voice traffic correctly but sends outbound DSCP zero, so downstream devices undo priority handling. It is not a valid fix here.
Question 852
The team believes it has resolved this Junos issue: After a RADIUS outage, the access switch opens ports broadly instead of applying the approved restricted server-fail VLAN. Which observation best verifies the specific intended result?
- The switch reports an authorized session with the intended VLAN and access policy.
- The scanner authenticates through the approved method without any browser step, while unknown devices stay denied.
- The observed authentication state identifies missing supplicant response, and the approved method onboards the endpoint.
- During a simulated RADIUS outage, endpoints receive only the approved degraded-connectivity policy.
Explanation
Correct Answer
D:During a simulated RADIUS outage, endpoints receive only the approved degraded-connectivity policy. This checks the relevant result after use a supported restricted server-fail policy and validate failure handling on the specific Junos platform.
Incorrect Answers
A:“The switch reports an authorized session with the intended VLAN and access policy” belongs to a separate Layer 2 Authentication and Access Control issue: an EAP-compliant endpoint authenticates while the required policy attribute is absent or ignored in switch port authorization. It does not explain the condition tested here.
B:“The scanner authenticates through the approved method without any browser step, while unknown devices stay denied” belongs to a separate Layer 2 Authentication and Access Control issue: a noninteractive sensor is trapped in captive-portal onboarding because operators selected browser authentication for all endpoints. It does not explain the condition tested here.
C:“The observed authentication state identifies missing supplicant response, and the approved method onboards the endpoint” belongs to a separate Layer 2 Authentication and Access Control issue: a switch logs EAP timeout while the endpoint has no 802.1X supplicant, yet the operator rotates valid RADIUS passwords repeatedly. It does not explain the condition tested here.
Question 853
To prevent recurrence of this precise networking failure, which practice should be adopted? A core-router replacement leaves an OSPF adjacency stuck exchanging database descriptions, while the two ends have different Layer 3 MTUs.
- Validate active logical-interface mappings and IPv6 adjacency as part of change acceptance.
- Keep IPv4 and IPv6 routing verification separate for dual-stack maintenance.
- Make physical and logical MTU parity part of transit-link commissioning and review.
- Test one allowed and one forbidden route against each export policy term before deployment.
Explanation
Correct Answer
C:Make physical and logical MTU parity part of transit-link commissioning and review. This guards against OSPF database-description exchange can stall when adjacent interfaces disagree on MTU even though basic Hello connectivity exists.
Incorrect Answers
A:“Validate active logical-interface mappings and IPv6 adjacency as part of change acceptance” belongs to a separate Interior Gateway Protocols (IGPs) issue: a new IPv6 peering uses OSPFv3 on a retired VLAN unit rather than the active routed transit interface. It does not explain the condition tested here.
B:“Keep IPv4 and IPv6 routing verification separate for dual-stack maintenance” belongs to a separate Interior Gateway Protocols (IGPs) issue: an OSPFv3 adjacency on a dual-stack campus changes state because engineers treat IPv4 interface reachability as proof of IPv6 control-plane health. It does not explain the condition tested here.
D:“Test one allowed and one forbidden route against each export policy term before deployment” belongs to a separate Interior Gateway Protocols (IGPs) issue: a branch default-route injection stops after a policy matches OSPF-learned routes instead of the intended local static. It does not explain the condition tested here.
Question 854
The team believes it has resolved this Junos issue: A customer access switch trusts external CoS bits and redistributes high-priority markings to all guest traffic. Which observation best verifies the specific intended result?
- Only approved media streams leave with high-priority code points; backup traffic uses its designated mark.
- Control-plane-related traffic receives the expected queue treatment under simulated load.
- Voice traffic receives the required scheduled service at the congested egress without starving other classes.
- Controlled traffic probes pass valid bursts without permitting sustained rate violations.
Explanation
Correct Answer
A:Only approved media streams leave with high-priority code points; backup traffic uses its designated mark. This checks the relevant result after define a controlled rewrite map for each class and verify high-priority markings remain restricted.
Incorrect Answers
B:“Control-plane-related traffic receives the expected queue treatment under simulated load” belongs to a separate Class of Service (CoS) issue: a forwarding-class configuration sends critical routing packets to a queue used for bulk backups and adjacency stability degrades under load. It does not explain the condition tested here.
C:“Voice traffic receives the required scheduled service at the congested egress without starving other classes” belongs to a separate Class of Service (CoS) issue: a low-latency queue is correctly classified but voice delays because its egress scheduler map is absent from the trunk. It does not explain the condition tested here.
D:“Controlled traffic probes pass valid bursts without permitting sustained rate violations” belongs to a separate Class of Service (CoS) issue: an uplink meets long-term bandwidth policy but legitimate short bursts exceed the token-bucket allowance. It does not explain the condition tested here.
Question 855
A network change is required for the following specific situation: A captive portal requirement is applied to a headless barcode scanner that has no web browser to follow its redirect. Which corrective action is most appropriate?
- Confirm the actual device and approved MAC record, then restrict the resulting authorization and add compensating controls.
- Configure supported MAC RADIUS under least-privilege policy and register the device MAC with the approved service.
- Check returned RADIUS attributes and supported platform software, then enforce a valid authorization assignment.
- Choose a documented compatible nonbrowser method such as supported MAC RADIUS under narrow access controls.
Explanation
Correct Answer
D:Captive portals presume interactive browser capabilities, making them unsuitable as the sole access method for headless devices. Verify this by checking that the scanner authenticates through the approved method without any browser step, while unknown devices stay denied.
Incorrect Answers
A:“Confirm the actual device and approved MAC record, then restrict the resulting authorization and add compensating controls” belongs to a separate Layer 2 Authentication and Access Control issue: a MAC RADIUS device changes its network adapter and can no longer authenticate because its registered identifier is stale. It does not explain the condition tested here.
B:“Configure supported MAC RADIUS under least-privilege policy and register the device MAC with the approved service” belongs to a separate Layer 2 Authentication and Access Control issue: a non-802.1X network printer is consistently rejected because its access port permits only EAP supplicants. It does not explain the condition tested here.
C:“Check returned RADIUS attributes and supported platform software, then enforce a valid authorization assignment” belongs to a separate Layer 2 Authentication and Access Control issue: a switch receives successful RADIUS Access-Accept but the user still lands in an unexpected VLAN because the dynamic assignment is not supported on that platform. It does not explain the condition tested here.
Question 856
Select THREE complementary corrective, verification, or preventive controls for this scenario: A network uses one VLAN-wide topology but wants two forwarding trees for different groups without an instance for every VLAN.
- Track MSTP instance scale and maintain identical region parameters across participating switches.
- The required VLAN groups follow their designated MSTI paths without per-VLAN instance explosion.
- Disable private VLAN restrictions entirely as a shortcut to reach a single shared uplink service.
- Create an approved MSTP region and VLAN-to-instance mapping, then verify root and port role behavior.
- Enable ordinary Q-in-Q tagging alone and assume every customer control protocol is necessarily tunneled.
- Create an independent VSTP instance for every VLAN without checking platform scaling limits.
Explanation
Correct Answers
A:Prevention of recurrence: MSTP maps VLANs into a smaller set of spanning-tree instances, providing scalable per-group path control.
B:Confirmation: Create an approved MSTP region and VLAN-to-instance mapping, then verify root and port role behavior.
D:Correction: MSTP maps VLANs into a smaller set of spanning-tree instances, providing scalable per-group path control.
Incorrect Answers
C:“Disable private VLAN restrictions entirely as a shortcut to reach a single shared uplink service” is an unsafe response to a different problem: a building's private VLAN design inadvertently limits tenant access to a shared printer uplink while direct tenant communication is supposed to stay blocked. It is not a valid fix here.
E:“Enable ordinary Q-in-Q tagging alone and assume every customer control protocol is necessarily tunneled” is an unsafe response to a different problem: a private L2 service must extend customer control protocols, yet the provider fabric consumes or drops the customer's BPDUs. It is not a valid fix here.
F:“Create an independent VSTP instance for every VLAN without checking platform scaling limits” does not address MSTP maps VLANs into a smaller set of spanning-tree instances, providing scalable per-group path control.
Question 857
To prevent recurrence of this precise networking failure, which practice should be adopted? A campus router's BGP IPv6 session is Established yet peers advertise only inet unicast family routes.
- Validate all required BGP address families during dual-stack peer commissioning.
- Include inet6-specific next-hop verification in dual-stack BGP peer checklists.
- Include show route hidden and policy term hit checks in BGP troubleshooting playbooks.
- Review next-hop propagation and IGP coverage whenever an eBGP route enters iBGP.
Explanation
Correct Answer
A:Validate all required BGP address families during dual-stack peer commissioning. This guards against BGP address-family negotiation controls which IPv4 or IPv6 NLRI can be exchanged independently of session state.
Incorrect Answers
B:“Include inet6-specific next-hop verification in dual-stack BGP peer checklists” belongs to a separate Border Gateway Protocol (BGP) issue: an IPv6 BGP peer receives a route with an unreachable IPv6 next hop despite an otherwise valid inet6 unicast advertisement. It does not explain the condition tested here.
C:“Include show route hidden and policy term hit checks in BGP troubleshooting playbooks” belongs to a separate Border Gateway Protocol (BGP) issue: a remote prefix appears in incoming BGP updates yet never becomes active after a new route policy was applied. It does not explain the condition tested here.
D:“Review next-hop propagation and IGP coverage whenever an eBGP route enters iBGP” belongs to a separate Border Gateway Protocol (BGP) issue: an iBGP egress advertisement forwards a transit next hop that branch routers cannot resolve, creating traffic blackholes. It does not explain the condition tested here.
Question 858
The team believes it has resolved this Junos issue: A controlled one-source data feed requires group membership constrained by both source and group, not arbitrary senders. Which observation best verifies the specific intended result?
- Receivers subscribed to the intended (S,G) get traffic while nonselected sources cannot join that flow.
- The selected upstream RPF neighbor and packet arrival interface agree, restoring intended multicast flow.
- RPF counters and expected (S,G) forwarding stabilize after the route change.
- Remote ASM receivers can discover the intended source and request multicast delivery through the proper tree.
Explanation
Correct Answer
A:Receivers subscribed to the intended (S,G) get traffic while nonselected sources cannot join that flow. This checks the relevant result after select an appropriate SSM group range and verify source-specific IGMPv3/PIM signaling on the supported platform.
Incorrect Answers
B:“The selected upstream RPF neighbor and packet arrival interface agree, restoring intended multicast flow” belongs to a separate IP Multicast issue: a campus uses a separate inet.2 multicast RPF table and investigators inspect only inet.0, overlooking a stale source route. It does not explain the condition tested here.
C:“RPF counters and expected (S,G) forwarding stabilize after the route change” belongs to a separate IP Multicast issue: a stream uses asymmetric unicast routing; multicast forwarding fails intermittently although individual host routes work. It does not explain the condition tested here.
D:“Remote ASM receivers can discover the intended source and request multicast delivery through the proper tree” belongs to a separate IP Multicast issue: a multicast source is active in a different PIM domain but the local ASM RP never learns the source mapping. It does not explain the condition tested here.
Question 859
A network change is required for the following specific situation: A new switch automatically discovers VLAN registrations on one trunk, but an intermediate trunk lacks MVRP participation and blocks the VLAN. Which corrective action is most appropriate?
- Create an approved MSTP region and VLAN-to-instance mapping, then verify root and port role behavior.
- Inspect VSTP VLAN membership, root priority and port roles, then repair the intended per-VLAN root arrangement.
- Inspect MVRP state and permitted VLANs on each trunk; enable supported participation on the missing hop.
- Map the trusted endpoints to the proper community secondary VLAN and keep other groups segregated.
Explanation
Correct Answer
C:MVRP distributes VLAN registration information across participating links; a gap can stop propagation. Verify this by checking that the VLAN registration propagates to the intended downstream trunk and reaches its member ports.
Incorrect Answers
A:“Create an approved MSTP region and VLAN-to-instance mapping, then verify root and port role behavior” belongs to a separate Ethernet Switching and Spanning Tree issue: a large campus places hundreds of VLANs in separate spanning-tree instances and reaches scale or CPU limits. It does not explain the condition tested here.
B:“Inspect VSTP VLAN membership, root priority and port roles, then repair the intended per-VLAN root arrangement” belongs to a separate Ethernet Switching and Spanning Tree issue: a legacy interop design needs separate per-VLAN spanning-tree compatibility but all VLANs inherit one unsuitable tree. It does not explain the condition tested here.
D:“Map the trusted endpoints to the proper community secondary VLAN and keep other groups segregated” belongs to a separate Ethernet Switching and Spanning Tree issue: members of the same trusted workgroup are accidentally placed in isolated rather than community PVLAN ports and lose peer communication. It does not explain the condition tested here.
Question 860
The team believes it has resolved this Junos issue: A noninteractive sensor is trapped in captive-portal onboarding because operators selected browser authentication for all endpoints. Which observation best verifies the specific intended result?
- The switch reports an authorized session with the intended VLAN and access policy.
- The scanner authenticates through the approved method without any browser step, while unknown devices stay denied.
- A known-good supplicant completes EAP/RADIUS authentication and the port reaches its intended authorized state.
- A nonresponding guest gets its intended limited VLAN while invalid credentials never receive guest privilege.
Explanation
Correct Answer
B:The scanner authenticates through the approved method without any browser step, while unknown devices stay denied. This checks the relevant result after choose a documented compatible nonbrowser method such as supported MAC RADIUS under narrow access controls.
Incorrect Answers
A:“The switch reports an authorized session with the intended VLAN and access policy” belongs to a separate Layer 2 Authentication and Access Control issue: an EAP-compliant endpoint authenticates while the required policy attribute is absent or ignored in switch port authorization. It does not explain the condition tested here.
C:“A known-good supplicant completes EAP/RADIUS authentication and the port reaches its intended authorized state” belongs to a separate Layer 2 Authentication and Access Control issue: a campus access interface keeps a compliant supplicant blocked while EAP requests never reach the expected authentication backend. It does not explain the condition tested here.
D:“A nonresponding guest gets its intended limited VLAN while invalid credentials never receive guest privilege” belongs to a separate Layer 2 Authentication and Access Control issue: a credential-rejected user is sent to the guest VLAN even though the planned design reserves guest VLAN for silent non-supplicants. It does not explain the condition tested here.
Enterprise Routing and Switching, Professional (JNCIP-ENT) (JN0-650) Practice Tests