Juniper JN0-650 Exam Dumps, Practice Test Questions

100% Latest & Updated Juniper JN0-650 Practice Test Questions, Exam Dumps & Verified Answers!
30 Days Free Updates, Instant Download!

Juniper JN0-650  Premium File
$54.99
$49.99

JN0-650 Premium File

  • Premium File: 107 Questions & Answers. Last update: Nov 7, 2026
  • Latest Questions
  • 100% Accurate Answers
  • Fast Exam Updates

JN0-650 Premium File

Juniper JN0-650  Premium File
  • Premium File: 107 Questions & Answers. Last update: Nov 7, 2026
  • Latest Questions
  • 100% Accurate Answers
  • Fast Exam Updates
$54.99
$49.99

Juniper JN0-650 Practice Test 95

Question 940

To prevent recurrence of this precise networking failure, which practice should be adopted? An aggregation network sees customer VLAN IDs collide because several tenants share the same single-tagged provider infrastructure.

  1. Version-control MSTP name, revision and VLAN mapping as one change unit.
  2. Document primary/secondary VLAN mappings and test permitted peer groups and isolation boundaries.
  3. Document outer/inner VLAN roles and test tag stripping and preservation at service boundaries.
  4. Keep explicit root priority policy and validate elections after device replacement.

Explanation

Correct Answer

C:

Document outer/inner VLAN roles and test tag stripping and preservation at service boundaries. This guards against Q-in-Q encapsulation can place a provider outer tag around customer VLAN tags to isolate transport context.

Incorrect Answers

A:

“Version-control MSTP name, revision and VLAN mapping as one change unit” belongs to a separate Ethernet Switching and Spanning Tree issue: an uplink becomes a region boundary unexpectedly after an administrator changes an MSTP configuration name on only one switch. It does not explain the condition tested here.

B:

“Document primary/secondary VLAN mappings and test permitted peer groups and isolation boundaries” belongs to a separate Ethernet Switching and Spanning Tree issue: members of the same trusted workgroup are accidentally placed in isolated rather than community PVLAN ports and lose peer communication. It does not explain the condition tested here.

D:

“Keep explicit root priority policy and validate elections after device replacement” belongs to a separate Ethernet Switching and Spanning Tree issue: a switch with an unexpectedly low bridge priority becomes MSTP root and redirects aggregation traffic through an access closet. It does not explain the condition tested here.

Question 941

A network change is required for the following specific situation: A switch receives successful RADIUS Access-Accept but the user still lands in an unexpected VLAN because the dynamic assignment is not supported on that platform. Which corrective action is most appropriate?

  1. Confirm the actual device and approved MAC record, then restrict the resulting authorization and add compensating controls.
  2. Consult the target release's official 802.1X support matrix and adapt the authorization design to supported methods.
  3. Check returned RADIUS attributes and supported platform software, then enforce a valid authorization assignment.
  4. Check authentication result classification and map the rejected user to an appropriate deny or reject response.

Explanation

Correct Answer

C:

Authentication success and postauthentication VLAN/policy assignment are separate stages whose feature support may vary. Verify this by checking that the switch reports an authorized session with the intended VLAN and access policy.

Incorrect Answers

A:

“Confirm the actual device and approved MAC record, then restrict the resulting authorization and add compensating controls” belongs to a separate Layer 2 Authentication and Access Control issue: a printer's MAC address is duplicated by an unauthorized endpoint that obtains the same weak MAC-based policy. It does not explain the condition tested here.

B:

“Consult the target release's official 802.1X support matrix and adapt the authorization design to supported methods” belongs to a separate Layer 2 Authentication and Access Control issue: an engineer copies legacy 802.1X fallback settings to a platform whose supported feature matrix excludes them. It does not explain the condition tested here.

D:

“Check authentication result classification and map the rejected user to an appropriate deny or reject response” belongs to a separate Layer 2 Authentication and Access Control issue: a credential-rejected user is sent to the guest VLAN even though the planned design reserves guest VLAN for silent non-supplicants. It does not explain the condition tested here.

Question 942

A Junos enterprise team investigates this incident: An OSPF import policy hides external routes on one device while neighbors retain them, confusing the team reviewing reachability. Which technical explanation most directly identifies the cause or design principle?

  1. An established OSPFv3 neighbor does not prove every desired IPv6 interface prefix is included in the protocol topology.
  2. Protocol route advertisement and active-route selection are separate; lower route preference can select a non-OSPF candidate.
  3. OSPF identifies routers by unique router ID; collisions can destabilize LSDB and adjacency behavior.
  4. Local import policy can affect installed route visibility independently of the remote origination of LSAs.

Explanation

Correct Answer

D:

Local import policy can affect installed route visibility independently of the remote origination of LSAs. The appropriate response is to compare LSDB advertisements with local route policy and inet.0 state; correct the intended import filter.

Incorrect Answers

A:

“An established OSPFv3 neighbor does not prove every desired IPv6 interface prefix is included in the protocol topology” belongs to a separate Interior Gateway Protocols (IGPs) issue: OSPFv3 peering comes up but the desired IPv6 loopback is not in the routing database after a rollout. It does not explain the condition tested here.

B:

“Protocol route advertisement and active-route selection are separate; lower route preference can select a non-OSPF candidate” belongs to a separate Interior Gateway Protocols (IGPs) issue: an IPv6 route learned through OSPFv3 is absent from the forwarding table because a more preferred static route covers the same prefix. It does not explain the condition tested here.

C:

“OSPF identifies routers by unique router ID; collisions can destabilize LSDB and adjacency behavior” belongs to a separate Interior Gateway Protocols (IGPs) issue: two newly deployed distribution switches report identical OSPF router IDs, causing inconsistent LSAs in the area. It does not explain the condition tested here.

Question 943

A Junos enterprise team investigates this incident: A multicast team changes unicast routing yet an engineered multicast RPF table still points to an obsolete next hop. Which technical explanation most directly identifies the cause or design principle?

  1. ASM and SSM use different membership and source-selection semantics; an SSM receiver must identify its desired sender.
  2. Source-specific multicast uses (S,G) membership semantics and generally avoids ASM rendezvous-point discovery for that flow.
  3. IP multicast replicates streams at forwarding branches instead of requiring a separate source-to-receiver unicast stream.
  4. Junos multicast RPF may use a dedicated routing table, so the effective RPF path must be inspected, not guessed from unicast traffic.

Explanation

Correct Answer

D:

Junos multicast RPF may use a dedicated routing table, so the effective RPF path must be inspected, not guessed from unicast traffic. The appropriate response is to identify the configured RPF table and verify the source route and next hop in that table before updating the multicast policy.

Incorrect Answers

A:

“ASM and SSM use different membership and source-selection semantics; an SSM receiver must identify its desired sender” belongs to a separate IP Multicast issue: a campus multicast application migrates ASM clients to SSM but does not update the source-qualified membership requests. It does not explain the condition tested here.

B:

“Source-specific multicast uses (S,G) membership semantics and generally avoids ASM rendezvous-point discovery for that flow” belongs to a separate IP Multicast issue: a video source is known and receivers support IGMPv3, but engineers configure ASM and an RP unnecessarily for the source-specific application. It does not explain the condition tested here.

C:

“IP multicast replicates streams at forwarding branches instead of requiring a separate source-to-receiver unicast stream” belongs to a separate IP Multicast issue: a trading-data sender needs to serve many local subscribers, but each listener receives its own redundant copy over the backbone. It does not explain the condition tested here.

Question 944

To prevent recurrence of this precise networking failure, which practice should be adopted? A team wrongly concludes OSPFv3 failed when inet6.0 shows a static route active and the OSPFv3 candidate inactive.

  1. Record both LSDB presence and local RIB installation in OSPF troubleshooting runbooks.
  2. Make physical and logical MTU parity part of transit-link commissioning and review.
  3. Verify both protocol RIB candidates and active next-hop selection in dual-stack change tests.
  4. Use named prefix lists and regression tests for approved and denied redistribution cases.

Explanation

Correct Answer

C:

Verify both protocol RIB candidates and active next-hop selection in dual-stack change tests. This guards against protocol route advertisement and active-route selection are separate; lower route preference can select a non-OSPF candidate.

Incorrect Answers

A:

“Record both LSDB presence and local RIB installation in OSPF troubleshooting runbooks” belongs to a separate Interior Gateway Protocols (IGPs) issue: a core node shows a missing route while remote LSDBs include the corresponding external LSA after a local policy change. It does not explain the condition tested here.

B:

“Make physical and logical MTU parity part of transit-link commissioning and review” belongs to a separate Interior Gateway Protocols (IGPs) issue: a core-router replacement leaves an OSPF adjacency stuck exchanging database descriptions, while the two ends have different Layer 3 MTUs. It does not explain the condition tested here.

D:

“Use named prefix lists and regression tests for approved and denied redistribution cases” belongs to a separate Interior Gateway Protocols (IGPs) issue: a redistribution policy injects every static route into OSPF, including a maintenance-only prefix that should stay local. It does not explain the condition tested here.

Question 945

Select THREE complementary corrective, verification, or preventive controls for this scenario: A campus migration removes a VLAN at the source while a trunk continues advertising it unexpectedly.

  1. Create an independent VSTP instance for every VLAN without checking platform scaling limits.
  2. Track VLAN lifecycle and MVRP registration ownership as ports are decommissioned.
  3. Disable private VLAN restrictions entirely as a shortcut to reach a single shared uplink service.
  4. The retired VLAN disappears from unintended trunks and valid registered VLANs remain reachable.
  5. Delete all VLANs from every trunk to clear one stale MVRP registration.
  6. Inspect registration state and remove stale VLAN membership while preserving necessary registrations.

Explanation

Correct Answers

B:

Prevention of recurrence: MVRP registrations can persist where membership state or participation has not been updated consistently.

D:

Confirmation: Inspect registration state and remove stale VLAN membership while preserving necessary registrations.

F:

Correction: MVRP registrations can persist where membership state or participation has not been updated consistently.

Incorrect Answers

A:

“Create an independent VSTP instance for every VLAN without checking platform scaling limits” is an unsafe response to a different problem: a large campus places hundreds of VLANs in separate spanning-tree instances and reaches scale or CPU limits. It is not a valid fix here.

C:

“Disable private VLAN restrictions entirely as a shortcut to reach a single shared uplink service” is an unsafe response to a different problem: a private VLAN isolated endpoint reaches the local gateway but cannot access a peer service that should be shared via a permitted promiscuous port. It is not a valid fix here.

E:

“Delete all VLANs from every trunk to clear one stale MVRP registration” does not address MVRP registrations can persist where membership state or participation has not been updated consistently.

Question 946

The team believes it has resolved this Junos issue: A fabric advertises Type 3 routes and claims this proves specific remote host MACs are reachable. Which observation best verifies the specific intended result?

  1. Full-sized authorized frames traverse the VXLAN tunnel without unexpected fragmentation or blackholing.
  2. The expected MAC/IP binding is visible in Type 2 while multihoming and BUM state use their own route types.
  3. Both peers report a consistent Ethernet segment and failover preserves authorized connectivity.
  4. The remote VTEP becomes reachable and encapsulated packets cross the fabric as intended.

Explanation

Correct Answer

B:

The expected MAC/IP binding is visible in Type 2 while multihoming and BUM state use their own route types. This checks the relevant result after inspect the route type appropriate to the claimed control-plane information instead of treating all EVPN NLRIs equally.

Incorrect Answers

A:

“Full-sized authorized frames traverse the VXLAN tunnel without unexpected fragmentation or blackholing” belongs to a separate EVPN issue: an EVPN-VXLAN frame is dropped over a path where the IP underlay MTU was sized only for unencapsulated Ethernet payloads. It does not explain the condition tested here.

C:

“Both peers report a consistent Ethernet segment and failover preserves authorized connectivity” belongs to a separate EVPN issue: a multihomed CE is attached to two leafs but one leaf advertises a different ESI, preventing expected redundancy behavior. It does not explain the condition tested here.

D:

“The remote VTEP becomes reachable and encapsulated packets cross the fabric as intended” belongs to a separate EVPN issue: a new leaf imports VNI reachability but packets disappear because its VXLAN tunnel endpoint IP is unresolved. It does not explain the condition tested here.

Question 947

Which suggested shortcut would be especially unsafe for this exact situation? An Anycast RP design uses two RP addresses that do not share the intended anycast identity, producing inconsistent joins.

  1. Include source address changes in SSM subscription-management procedures.
  2. Document ASM/SSM selection and receiver-version prerequisites before multicast deployment.
  3. Configure two unrelated RP mappings and assume their failover and source state stay identical automatically.
  4. Document whether multicast RPF uses inet.0 or inet.2 and verify after topology changes.

Explanation

Correct Answer

C:

The tempting alternative fails because anycast RP aims for a stable RP address with multiple nodes; consistent source discovery and RP coordination are essential to the chosen architecture. The supported action is to verify anycast RP address and supported source synchronization method across the participating RP nodes.

Incorrect Answers

A:

That prevention measure relates to a campus multicast application migrates ASM clients to SSM but does not update the source-qualified membership requests.; it is not the unsafe shortcut described here.

B:

That prevention measure relates to a video source is known and receivers support IGMPv3, but engineers configure ASM and an RP unnecessarily for the source-specific application.; it is not the unsafe shortcut described here.

D:

That prevention measure relates to a campus uses a separate inet.2 multicast RPF table and investigators inspect only inet.0, overlooking a stale source route.; it is not the unsafe shortcut described here.

Question 948

Which suggested shortcut would be especially unsafe for this exact situation? Voice packets arrive with DSCP EF but are placed into the best-effort queue after a new access interface template is applied.

  1. Differentiate ingress policing from egress shaping when designing bandwidth controls.
  2. Review queue buffer tradeoffs and regression-test peak loads before tuning schedulers.
  3. Validate classifier, scheduler map and interface association as a complete CoS chain.
  4. Configure egress rewriting alone and assume it classifies all incoming traffic into voice queues.

Explanation

Correct Answer

D:

The tempting alternative fails because Junos ingress classifiers map packet header code points to forwarding classes and packet loss priority, subject to interface attachment. The supported action is to apply an approved behavior-aggregate classifier with the intended DSCP-to-class mapping on the real ingress interface.

Incorrect Answers

A:

That prevention measure relates to a branch wants to enforce a traffic contract on an incoming service flow yet applies policing to an unrelated egress path.; it is not the unsafe shortcut described here.

B:

That prevention measure relates to a backup traffic queue consumes too much buffer and latency-sensitive applications starve during peak bursts.; it is not the unsafe shortcut described here.

C:

That prevention measure relates to a low-latency queue is correctly classified but voice delays because its egress scheduler map is absent from the trunk.; it is not the unsafe shortcut described here.

Question 949

Which suggested shortcut would be especially unsafe for this exact situation? A campus uses a separate inet.2 multicast RPF table and investigators inspect only inet.0, overlooking a stale source route.

  1. Document ASM/SSM selection and receiver-version prerequisites before multicast deployment.
  2. Assume inet.0 always controls PIM RPF even when an alternate multicast RPF table is configured.
  3. Monitor IGMP membership churn and snooping state when moving clients between VLANs.
  4. Keep an approved multicast group allocation and test boundary enforcement after routing changes.

Explanation

Correct Answer

B:

The tempting alternative fails because Junos multicast RPF may use a dedicated routing table, so the effective RPF path must be inspected, not guessed from unicast traffic. The supported action is to identify the configured RPF table and verify the source route and next hop in that table before updating the multicast policy.

Incorrect Answers

A:

That prevention measure relates to a controlled one-source data feed requires group membership constrained by both source and group, not arbitrary senders.; it is not the unsafe shortcut described here.

C:

That prevention measure relates to a receiver port stops getting multicast because IGMP membership was not processed by the access switch after an interface move.; it is not the unsafe shortcut described here.

D:

That prevention measure relates to a laboratory's multicast test group leaks to the corporate backbone despite a requirement to keep it within the lab.; it is not the unsafe shortcut described here.

Question 950

Which suggested shortcut would be especially unsafe for this exact situation? An edge router uses a broad multicast filter that blocks valid collaboration groups alongside restricted lab streams.

  1. Document ASM/SSM selection and receiver-version prerequisites before multicast deployment.
  2. Monitor IGMP membership churn and snooping state when moving clients between VLANs.
  3. Maintain consistent RP mappings and failover tests across multicast routers.
  4. Replace all multicast group filters with a broad permit because at least one approved stream failed.

Explanation

Correct Answer

D:

The tempting alternative fails because policy selectors must match the intended multicast group and source ranges so unrelated services are not blocked or leaked. The supported action is to refine the relevant multicast policy ranges and inspect forwarding for both permitted and denied groups.

Incorrect Answers

A:

That prevention measure relates to a video source is known and receivers support IGMPv3, but engineers configure ASM and an RP unnecessarily for the source-specific application.; it is not the unsafe shortcut described here.

B:

That prevention measure relates to a receiver port stops getting multicast because IGMP membership was not processed by the access switch after an interface move.; it is not the unsafe shortcut described here.

C:

That prevention measure relates to a PIM sparse-mode receiver has an IGMP join but no multicast traffic because its upstream router cannot resolve the rendezvous point.; it is not the unsafe shortcut described here.

Enterprise Routing and Switching, Professional (JNCIP-ENT) (JN0-650) Practice Tests

UP

SPECIAL OFFER: GET 10% OFF

This is ONE TIME OFFER

ExamSnap Discount Offer
Enter Your Email Address to Receive Your 10% Off Discount Code

A confirmation link will be sent to this email address to verify your login. *We value your privacy. We will not rent or sell your email address.

Download Free Demo of VCE Exam Simulator

Experience Avanset VCE Exam Simulator for yourself.

Simply submit your e-mail address below to get started with our interactive software demo of your free trial.

Free Demo Limits: In the demo version you will be able to access only first 5 questions from exam.