100% Latest & Updated Juniper JN0-650 Practice Test Questions, Exam Dumps & Verified Answers!
30 Days Free Updates, Instant Download!
Question 930
For this case, select TWO complementary measures or outcome checks that directly resolve the problem: A campus OSPF interface is accidentally placed in area 0 while its neighbor advertises a nonbackbone area, preventing a Full adjacency.
- Change only router IDs while leaving the mismatched interface areas intact.
- Increase every external metric blindly without checking which path should win.
- Record a successful IPv4 echo response as conclusive proof that OSPFv3 is healthy.
- OSPF neighbor state reaches Full and the expected area LSDB receives the neighbor advertisements.
- Compare configured interface areas with the approved topology and put both interfaces in the intended matching area.
Explanation
Correct Answers
D:OSPF neighbor state reaches Full and the expected area LSDB receives the neighbor advertisements. The specific steps required are to compare configured interface areas with the approved topology and put both interfaces in the intended matching area.
E:Compare configured interface areas with the approved topology and put both interfaces in the intended matching area. This addresses the dependency that OSPF neighbors must agree on the area context to form adjacency on the common link.
Incorrect Answers
A:“Change only router IDs while leaving the mismatched interface areas intact” does not address OSPF neighbors must agree on the area context to form adjacency on the common link.
B:“Increase every external metric blindly without checking which path should win” is an unsafe response to a different problem: an OSPF policy update redistributes a route without an appropriate external metric, shifting traffic to a slow backup. It is not a valid fix here.
C:“Record a successful IPv4 echo response as conclusive proof that OSPFv3 is healthy” is an unsafe response to a different problem: an OSPFv3 adjacency on a dual-stack campus changes state because engineers treat IPv4 interface reachability as proof of IPv6 control-plane health. It is not a valid fix here.
Question 931
The team believes it has resolved this Junos issue: A second campus RP is deployed for availability but source-awareness synchronization is omitted where the design requires it. Which observation best verifies the specific intended result?
- RPF counters and expected (S,G) forwarding stabilize after the route change.
- A failure of one RP does not strand subscribers and remaining RPs maintain correct multicast source awareness.
- The selected upstream RPF neighbor and packet arrival interface agree, restoring intended multicast flow.
- Only the specified source delivers data to receivers of the chosen SSM group.
Explanation
Correct Answer
B:A failure of one RP does not strand subscribers and remaining RPs maintain correct multicast source awareness. This checks the relevant result after verify anycast RP address and supported source synchronization method across the participating RP nodes.
Incorrect Answers
A:“RPF counters and expected (S,G) forwarding stabilize after the route change” belongs to a separate IP Multicast issue: a stream uses asymmetric unicast routing; multicast forwarding fails intermittently although individual host routes work. It does not explain the condition tested here.
C:“The selected upstream RPF neighbor and packet arrival interface agree, restoring intended multicast flow” belongs to a separate IP Multicast issue: a multicast team changes unicast routing yet an engineered multicast RPF table still points to an obsolete next hop. It does not explain the condition tested here.
D:“Only the specified source delivers data to receivers of the chosen SSM group” belongs to a separate IP Multicast issue: a streaming application expects a source-specific group to accept traffic from any origin, contrary to its (S,G) subscription. It does not explain the condition tested here.
Question 932
Select THREE complementary corrective, verification, or preventive controls for this scenario: A fabric uses conflicting VLAN-to-VNI mappings on two leaf switches, bridging different tenant segments together.
- Compare VLAN-to-VNI and bridge-domain assignments on all leafs and correct them against the approved tenant map.
- Treat a single learned MAC/IP Type 2 route as guaranteed proof of correct BUM participation for every VTEP.
- Use two unrelated ESIs for one logical Ethernet segment and assume EVPN coordinates them as one.
- Maintain a central VNI registry and test cross-tenant isolation on each leaf rollout.
- Reuse one VNI for unrelated tenants and assume local VLAN names alone prevent overlay mixing.
- Tenant traffic reaches only its intended remote bridge domain and overlapping VLAN IDs remain isolated.
Explanation
Correct Answers
A:Correction: VNI and bridge-domain mapping determines tenant overlay segmentation; misaligned mappings can misdeliver or isolate traffic.
D:Prevention of recurrence: VNI and bridge-domain mapping determines tenant overlay segmentation; misaligned mappings can misdeliver or isolate traffic.
F:Confirmation: Compare VLAN-to-VNI and bridge-domain assignments on all leafs and correct them against the approved tenant map.
Incorrect Answers
B:“Treat a single learned MAC/IP Type 2 route as guaranteed proof of correct BUM participation for every VTEP” is an unsafe response to a different problem: a VNI is active on two leafs but unknown-unicast or broadcast replication never reaches the remote side. It is not a valid fix here.
C:“Use two unrelated ESIs for one logical Ethernet segment and assume EVPN coordinates them as one” is an unsafe response to a different problem: a multihomed CE is attached to two leafs but one leaf advertises a different ESI, preventing expected redundancy behavior. It is not a valid fix here.
E:“Reuse one VNI for unrelated tenants and assume local VLAN names alone prevent overlay mixing” does not address VNI and bridge-domain mapping determines tenant overlay segmentation; misaligned mappings can misdeliver or isolate traffic.
Question 933
To prevent recurrence of this precise networking failure, which practice should be adopted? Equal candidate BGP routes are visible but no multipath forwarding entry is installed because eligibility or policy differs.
- Track every BGP advertise-inactive exception and test cross-protocol route selection.
- Monitor AS-path anomalies and validate inter-AS topology changes before enabling export.
- Test path equivalence, forwarding and failure convergence before enabling transit ECMP.
- Include next-hop reachability tests in iBGP and route-reflector deployment acceptance.
Explanation
Correct Answer
C:Test path equivalence, forwarding and failure convergence before enabling transit ECMP. This guards against BGP equal-cost multipath requires appropriate configured support and matching eligible path attributes, not merely two established sessions.
Incorrect Answers
A:“Track every BGP advertise-inactive exception and test cross-protocol route selection” belongs to a separate Border Gateway Protocol (BGP) issue: an engineer adds advertise-inactive and downstream peers begin receiving a BGP route that loses to an OSPF route locally. It does not explain the condition tested here.
B:“Monitor AS-path anomalies and validate inter-AS topology changes before enabling export” belongs to a separate Border Gateway Protocol (BGP) issue: the local AS appears in a received external BGP AS_PATH and the route is rejected despite valid prefix reachability. It does not explain the condition tested here.
D:“Include next-hop reachability tests in iBGP and route-reflector deployment acceptance” belongs to a separate Border Gateway Protocol (BGP) issue: a new IPv4 BGP prefix has a valid AS path but cannot become active after the IGP stops carrying its next-hop address. It does not explain the condition tested here.
Question 934
To prevent recurrence of this precise networking failure, which practice should be adopted? Two adjacent MSTP switches show different region digests after one has a different VLAN-to-instance map.
- Scope and monitor tunneled L2 control protocols to prevent control-plane abuse.
- Document outer/inner VLAN roles and test tag stripping and preservation at service boundaries.
- Version-control MSTP name, revision and VLAN mapping as one change unit.
- Maintain representative match and nonmatch tests for filter-based VLAN policies.
Explanation
Correct Answer
C:Version-control MSTP name, revision and VLAN mapping as one change unit. This guards against MSTP region membership depends on compatible region parameters such as name, revision and VLAN-to-instance map.
Incorrect Answers
A:“Scope and monitor tunneled L2 control protocols to prevent control-plane abuse” belongs to a separate Ethernet Switching and Spanning Tree issue: an 802.1Q trunk carries customer data through a provider Ethernet segment but fails to forward the required spanning-tree control frames transparently. It does not explain the condition tested here.
B:“Document outer/inner VLAN roles and test tag stripping and preservation at service boundaries” belongs to a separate Ethernet Switching and Spanning Tree issue: an aggregation network sees customer VLAN IDs collide because several tenants share the same single-tagged provider infrastructure. It does not explain the condition tested here.
D:“Maintain representative match and nonmatch tests for filter-based VLAN policies” belongs to a separate Ethernet Switching and Spanning Tree issue: a campus onboarding policy puts cameras on the normal data VLAN even though a targeted filter-based VLAN should steer them. It does not explain the condition tested here.
Question 935
Which suggested shortcut would be especially unsafe for this exact situation? A fabric uses conflicting VLAN-to-VNI mappings on two leaf switches, bridging different tenant segments together.
- Reuse one VNI for unrelated tenants and assume local VLAN names alone prevent overlay mixing.
- Track route import, MAC mobility and aging during host migration tests.
- Validate EVPN Type 2 and Type 3 propagation separately in new VNI bring-up tests.
- Audit ESI consistency and platform-supported multihoming mode across paired leafs.
Explanation
Correct Answer
A:The tempting alternative fails because VNI and bridge-domain mapping determines tenant overlay segmentation; misaligned mappings can misdeliver or isolate traffic. The supported action is to compare VLAN-to-VNI and bridge-domain assignments on all leafs and correct them against the approved tenant map.
Incorrect Answers
B:That prevention measure relates to a new endpoint MAC is learned at a remote VTEP but never reaches the receiving leaf's EVPN control-plane table.; it is not the unsafe shortcut described here.
C:That prevention measure relates to a bridge domain has valid unicast Type 2 entries yet remote VTEPs do not discover a new participating segment for BUM forwarding.; it is not the unsafe shortcut described here.
D:That prevention measure relates to a shared Ethernet segment loses its fast convergence properties after an ESI-LAG peer receives an inconsistent configuration.; it is not the unsafe shortcut described here.
Question 936
To prevent recurrence of this precise networking failure, which practice should be adopted? Video gets dropped under congestion despite spare capacity because its queue has a too-small delay buffer.
- Review queue buffer tradeoffs and regression-test peak loads before tuning schedulers.
- Test both average-rate enforcement and microburst tolerance for new policer profiles.
- Test classifier attachment and DSCP mappings on every access and aggregation ingress template.
- Keep a documented forwarding-class inventory and test default mappings after service changes.
Explanation
Correct Answer
A:Review queue buffer tradeoffs and regression-test peak loads before tuning schedulers. This guards against queue schedulers and buffer parameters influence service rate and delay/drop behavior at congested egress.
Incorrect Answers
B:“Test both average-rate enforcement and microburst tolerance for new policer profiles” belongs to a separate Class of Service (CoS) issue: a traffic policer drops small microbursts despite an acceptable average rate because its configured burst size is too tight. It does not explain the condition tested here.
C:“Test classifier attachment and DSCP mappings on every access and aggregation ingress template” belongs to a separate Class of Service (CoS) issue: voice packets arrive with DSCP EF but are placed into the best-effort queue after a new access interface template is applied. It does not explain the condition tested here.
D:“Keep a documented forwarding-class inventory and test default mappings after service changes” belongs to a separate Class of Service (CoS) issue: a forwarding-class configuration sends critical routing packets to a queue used for bulk backups and adjacency stability degrades under load. It does not explain the condition tested here.
Question 937
Which suggested shortcut would be especially unsafe for this exact situation? A branch receives two external paths with different metric-type assumptions after a policy change and prefers the wrong exit.
- Make physical and logical MTU parity part of transit-link commissioning and review.
- Keep IPv4 and IPv6 routing verification separate for dual-stack maintenance.
- Increase every external metric blindly without checking which path should win.
- Validate per-interface OSPF area assignments from an approved topology matrix before commit.
Explanation
Correct Answer
C:The tempting alternative fails because OSPF external route costs and metric types affect path choice and must reflect intended topology and failover behavior. The supported action is to review external metric type and value at the originator, then apply the documented traffic-engineering policy.
Incorrect Answers
A:That prevention measure relates to a core-router replacement leaves an OSPF adjacency stuck exchanging database descriptions, while the two ends have different Layer 3 MTUs.; it is not the unsafe shortcut described here.
B:That prevention measure relates to an OSPFv3 adjacency on a dual-stack campus changes state because engineers treat IPv4 interface reachability as proof of IPv6 control-plane health.; it is not the unsafe shortcut described here.
D:That prevention measure relates to a campus OSPF interface is accidentally placed in area 0 while its neighbor advertises a nonbackbone area, preventing a Full adjacency.; it is not the unsafe shortcut described here.
Question 938
To prevent recurrence of this precise networking failure, which practice should be adopted? A switch logs EAP timeout while the endpoint has no 802.1X supplicant, yet the operator rotates valid RADIUS passwords repeatedly.
- Review authorization policies for MAC endpoints against a least-privilege access matrix.
- Separate EAP silence, reject and timeout counters in authentication operational monitoring.
- Test fail-open/fail-closed decisions and platform-specific fallback capabilities in disaster recovery exercises.
- Review MAC-device inventory, spoofing exposure and expiry before using MAC-based authorization.
Explanation
Correct Answer
B:Separate EAP silence, reject and timeout counters in authentication operational monitoring. This guards against supplicant absence is a distinct failure from an invalid credential or unreachable authentication server.
Incorrect Answers
A:“Review authorization policies for MAC endpoints against a least-privilege access matrix” belongs to a separate Layer 2 Authentication and Access Control issue: a MAC RADIUS policy authenticates a known camera but applies the broad employee VLAN instead of a camera-only network. It does not explain the condition tested here.
C:“Test fail-open/fail-closed decisions and platform-specific fallback capabilities in disaster recovery exercises” belongs to a separate Layer 2 Authentication and Access Control issue: an enterprise fallback design accidentally places unauthenticated users into the production network when all RADIUS servers fail. It does not explain the condition tested here.
D:“Review MAC-device inventory, spoofing exposure and expiry before using MAC-based authorization” belongs to a separate Layer 2 Authentication and Access Control issue: a non-802.1X network printer is consistently rejected because its access port permits only EAP supplicants. It does not explain the condition tested here.
Question 939
Which suggested shortcut would be especially unsafe for this exact situation? An IPv6 route learned through OSPFv3 is absent from the forwarding table because a more preferred static route covers the same prefix.
- Run prefix-boundary tests before enabling area aggregation on an ABR.
- Document expected external metrics and run primary/backup failover tests during policy changes.
- Reserve router IDs from a centrally managed inventory before zero-touch provisioning.
- Reset OSPFv3 adjacency repeatedly although the route exists as a nonactive candidate.
Explanation
Correct Answer
D:The tempting alternative fails because protocol route advertisement and active-route selection are separate; lower route preference can select a non-OSPF candidate. The supported action is to inspect inet6.0 route detail and route preferences before changing OSPFv3 neighbor configuration.
Incorrect Answers
A:That prevention measure relates to an ABR stops advertising a branch prefix into the backbone after an OSPF area-range summary is configured incorrectly.; it is not the unsafe shortcut described here.
B:That prevention measure relates to a branch receives two external paths with different metric-type assumptions after a policy change and prefers the wrong exit.; it is not the unsafe shortcut described here.
C:That prevention measure relates to a router's OSPF neighbor restarts repeatedly because duplicate router IDs were assigned to different routing nodes.; it is not the unsafe shortcut described here.
Question 940
To prevent recurrence of this precise networking failure, which practice should be adopted? An aggregation network sees customer VLAN IDs collide because several tenants share the same single-tagged provider infrastructure.
- Version-control MSTP name, revision and VLAN mapping as one change unit.
- Document primary/secondary VLAN mappings and test permitted peer groups and isolation boundaries.
- Document outer/inner VLAN roles and test tag stripping and preservation at service boundaries.
- Keep explicit root priority policy and validate elections after device replacement.
Explanation
Correct Answer
C:Document outer/inner VLAN roles and test tag stripping and preservation at service boundaries. This guards against Q-in-Q encapsulation can place a provider outer tag around customer VLAN tags to isolate transport context.
Incorrect Answers
A:“Version-control MSTP name, revision and VLAN mapping as one change unit” belongs to a separate Ethernet Switching and Spanning Tree issue: an uplink becomes a region boundary unexpectedly after an administrator changes an MSTP configuration name on only one switch. It does not explain the condition tested here.
B:“Document primary/secondary VLAN mappings and test permitted peer groups and isolation boundaries” belongs to a separate Ethernet Switching and Spanning Tree issue: members of the same trusted workgroup are accidentally placed in isolated rather than community PVLAN ports and lose peer communication. It does not explain the condition tested here.
D:“Keep explicit root priority policy and validate elections after device replacement” belongs to a separate Ethernet Switching and Spanning Tree issue: a switch with an unexpectedly low bridge priority becomes MSTP root and redirects aggregation traffic through an access closet. It does not explain the condition tested here.
Enterprise Routing and Switching, Professional (JNCIP-ENT) (JN0-650) Practice Tests