100% Latest & Updated Juniper JN0-650 Practice Test Questions, Exam Dumps & Verified Answers!
30 Days Free Updates, Instant Download!
Question 210
The team believes it has resolved this Junos issue: A provider-facing policy stops honoring a route-tag community after a new import policy changes the attached communities. Which observation best verifies the specific intended result?
- The expected IPv6 prefix is received in inet6.0 while IPv4 route exchange remains unchanged.
- The previously hidden BGP prefix resolves its next hop and becomes an eligible route.
- The advertised set matches the documented inactive-BGP exception without changing local forwarding selection.
- A controlled route is withheld from prohibited peers while approved routes retain their expected advertisements.
Explanation
Correct Answer
D:A controlled route is withheld from prohibited peers while approved routes retain their expected advertisements. This checks the relevant result after inspect received communities and export policy terms, then attach a tested community match and reject rule.
Incorrect Answers
A:“The expected IPv6 prefix is received in inet6.0 while IPv4 route exchange remains unchanged” belongs to a separate Border Gateway Protocol (BGP) issue: BGP peers exchange IPv4 NLRI correctly but a planned IPv6 customer route never appears in inet6.0. It does not explain the condition tested here.
B:“The previously hidden BGP prefix resolves its next hop and becomes an eligible route” belongs to a separate Border Gateway Protocol (BGP) issue: a new IPv4 BGP prefix has a valid AS path but cannot become active after the IGP stops carrying its next-hop address. It does not explain the condition tested here.
C:“The advertised set matches the documented inactive-BGP exception without changing local forwarding selection” belongs to a separate Border Gateway Protocol (BGP) issue: an engineer adds advertise-inactive and downstream peers begin receiving a BGP route that loses to an OSPF route locally. It does not explain the condition tested here.
Question 211
The team believes it has resolved this Junos issue: An uplink becomes a region boundary unexpectedly after an administrator changes an MSTP configuration name on only one switch. Which observation best verifies the specific intended result?
- The VLAN registration propagates to the intended downstream trunk and reaches its member ports.
- Both switches show compatible region membership and intended instance root/port roles.
- Two customers can use overlapping inner VLAN numbers without traffic mixing on the transport.
- Two isolated tenant ports cannot reach each other but can reach the permitted gateway uplink.
Explanation
Correct Answer
B:Both switches show compatible region membership and intended instance root/port roles. This checks the relevant result after compare complete region configuration on the peers and restore the approved shared MSTP region values.
Incorrect Answers
A:“The VLAN registration propagates to the intended downstream trunk and reaches its member ports” belongs to a separate Ethernet Switching and Spanning Tree issue: a shared uplink carries dynamically registered VLANs until one device has MVRP disabled during an upgrade. It does not explain the condition tested here.
C:“Two customers can use overlapping inner VLAN numbers without traffic mixing on the transport” belongs to a separate Ethernet Switching and Spanning Tree issue: a service provider must carry multiple customer VLAN IDs transparently over one metro Ethernet handoff. It does not explain the condition tested here.
D:“Two isolated tenant ports cannot reach each other but can reach the permitted gateway uplink” instead concerns another network scenario: A shared guest access VLAN allows two untrusted hotel-room ports to communicate directly, violating the isolation design. It does not address the requirement here.
Question 212
For this case, select TWO complementary measures or outcome checks that directly resolve the problem: A captive portal requirement is applied to a headless barcode scanner that has no web browser to follow its redirect.
- Rotate every user's password without checking whether the endpoint sent an EAP response at all.
- Choose a documented compatible nonbrowser method such as supported MAC RADIUS under narrow access controls.
- The scanner authenticates through the approved method without any browser step, while unknown devices stay denied.
- Require the scanner to open a login web page even though the device has no web client.
- Assume any RADIUS Access-Accept forces a requested dynamic VLAN on every Junos switch variant.
Explanation
Correct Answers
B:Choose a documented compatible nonbrowser method such as supported MAC RADIUS under narrow access controls. This addresses the dependency that captive portals presume interactive browser capabilities, making them unsuitable as the sole access method for headless devices.
C:The scanner authenticates through the approved method without any browser step, while unknown devices stay denied. The specific steps required are to choose a documented compatible nonbrowser method such as supported MAC RADIUS under narrow access controls.
Incorrect Answers
A:“Rotate every user's password without checking whether the endpoint sent an EAP response at all” is an unsafe response to a different problem: a switch logs EAP timeout while the endpoint has no 802.1X supplicant, yet the operator rotates valid RADIUS passwords repeatedly. It is not a valid fix here.
D:“Require the scanner to open a login web page even though the device has no web client” does not address captive portals presume interactive browser capabilities, making them unsuitable as the sole access method for headless devices.
E:“Assume any RADIUS Access-Accept forces a requested dynamic VLAN on every Junos switch variant” is an unsafe response to a different problem: a switch receives successful RADIUS Access-Accept but the user still lands in an unexpected VLAN because the dynamic assignment is not supported on that platform. It is not a valid fix here.
Question 213
The team believes it has resolved this Junos issue: A dynamic VLAN is removed from one edge but stale MVRP registration keeps an unused VLAN active downstream. Which observation best verifies the specific intended result?
- The redundant topology converges without sustained broadcast loops during link-failure testing.
- The retired VLAN disappears from unintended trunks and valid registered VLANs remain reachable.
- Root and forwarding roles match the approved topology under normal and failover conditions.
- Isolated clients reach the shared service but cannot communicate laterally with other isolated clients.
Explanation
Correct Answer
B:The retired VLAN disappears from unintended trunks and valid registered VLANs remain reachable. This checks the relevant result after inspect registration state and remove stale VLAN membership while preserving necessary registrations.
Incorrect Answers
A:“The redundant topology converges without sustained broadcast loops during link-failure testing” belongs to a separate Ethernet Switching and Spanning Tree issue: a redundant L2 topology creates a broadcast storm after an edge port connected to another switch is treated as an endpoint. It does not explain the condition tested here.
C:“Root and forwarding roles match the approved topology under normal and failover conditions” belongs to a separate Ethernet Switching and Spanning Tree issue: a network replacement changes VSTP root elections, causing backup links to forward for a critical VLAN. It does not explain the condition tested here.
D:“Isolated clients reach the shared service but cannot communicate laterally with other isolated clients” belongs to a separate Ethernet Switching and Spanning Tree issue: a building's private VLAN design inadvertently limits tenant access to a shared printer uplink while direct tenant communication is supposed to stay blocked. It does not explain the condition tested here.
Question 214
For this case, select TWO complementary measures or outcome checks that directly resolve the problem: A new leaf imports VNI reachability but packets disappear because its VXLAN tunnel endpoint IP is unresolved.
- Increase a tenant VLAN identifier and expect it to fix an unreachable underlay VTEP IP.
- Repair authorized underlay routing to remote VTEPs and check tunnel reachability before changing EVPN policies.
- The remote VTEP becomes reachable and encapsulated packets cross the fabric as intended.
- Use two unrelated ESIs for one logical Ethernet segment and assume EVPN coordinates them as one.
- Treat a single learned MAC/IP Type 2 route as guaranteed proof of correct BUM participation for every VTEP.
Explanation
Correct Answers
B:Repair authorized underlay routing to remote VTEPs and check tunnel reachability before changing EVPN policies. This addresses the dependency that VXLAN encapsulates overlay traffic across an IP underlay; VTEP reachability is necessary even with valid BGP EVPN control-plane state.
C:The remote VTEP becomes reachable and encapsulated packets cross the fabric as intended. The specific steps required are to repair authorized underlay routing to remote VTEPs and check tunnel reachability before changing EVPN policies.
Incorrect Answers
A:“Increase a tenant VLAN identifier and expect it to fix an unreachable underlay VTEP IP” does not address VXLAN encapsulates overlay traffic across an IP underlay; VTEP reachability is necessary even with valid BGP EVPN control-plane state.
D:“Use two unrelated ESIs for one logical Ethernet segment and assume EVPN coordinates them as one” is an unsafe response to a different problem: a multihomed CE is attached to two leafs but one leaf advertises a different ESI, preventing expected redundancy behavior. It is not a valid fix here.
E:“Treat a single learned MAC/IP Type 2 route as guaranteed proof of correct BUM participation for every VTEP” is an unsafe response to a different problem: a VNI is active on two leafs but unknown-unicast or broadcast replication never reaches the remote side. It is not a valid fix here.
Question 215
A Junos enterprise team investigates this incident: A redistribution policy injects every static route into OSPF, including a maintenance-only prefix that should stay local. Which technical explanation most directly identifies the cause or design principle?
- An established OSPFv3 neighbor does not prove every desired IPv6 interface prefix is included in the protocol topology.
- Area summarization scope must correctly cover the intended component networks; the wrong range can suppress or misrepresent reachability.
- Unrestricted OSPF export policy can originate unintended external routes, changing enterprise reachability.
- OSPF neighbors must agree on the area context to form adjacency on the common link.
Explanation
Correct Answer
C:Unrestricted OSPF export policy can originate unintended external routes, changing enterprise reachability. The appropriate response is to restrict the export policy to explicit approved route prefixes and protocols, then check external LSAs.
Incorrect Answers
A:“An established OSPFv3 neighbor does not prove every desired IPv6 interface prefix is included in the protocol topology” belongs to a separate Interior Gateway Protocols (IGPs) issue: a replacement router has IPv6 OSPFv3 adjacency yet does not advertise the loopback subnet required for monitoring. It does not explain the condition tested here.
B:“Area summarization scope must correctly cover the intended component networks; the wrong range can suppress or misrepresent reachability” belongs to a separate Interior Gateway Protocols (IGPs) issue: a campus summarization change hides a needed subnet because the configured address range omits it. It does not explain the condition tested here.
D:“OSPF neighbors must agree on the area context to form adjacency on the common link” belongs to a separate Interior Gateway Protocols (IGPs) issue: a campus OSPF interface is accidentally placed in area 0 while its neighbor advertises a nonbackbone area, preventing a Full adjacency. It does not explain the condition tested here.
Question 216
The team believes it has resolved this Junos issue: A VXLAN overlay's BGP EVPN routes are present, but the underlay cannot route to a remote VTEP loopback. Which observation best verifies the specific intended result?
- The current MAC location is learned and traffic reaches the moved endpoint without persistent old-VTEP forwarding.
- BUM traffic reaches only participating VTEPs and the remote endpoint can be discovered.
- The remote VTEP becomes reachable and encapsulated packets cross the fabric as intended.
- Both peers report a consistent Ethernet segment and failover preserves authorized connectivity.
Explanation
Correct Answer
C:The remote VTEP becomes reachable and encapsulated packets cross the fabric as intended. This checks the relevant result after repair authorized underlay routing to remote VTEPs and check tunnel reachability before changing EVPN policies.
Incorrect Answers
A:“The current MAC location is learned and traffic reaches the moved endpoint without persistent old-VTEP forwarding” belongs to a separate EVPN issue: a new endpoint MAC is learned at a remote VTEP but never reaches the receiving leaf's EVPN control-plane table. It does not explain the condition tested here.
B:“BUM traffic reaches only participating VTEPs and the remote endpoint can be discovered” belongs to a separate EVPN issue: a VNI is active on two leafs but unknown-unicast or broadcast replication never reaches the remote side. It does not explain the condition tested here.
D:“Both peers report a consistent Ethernet segment and failover preserves authorized connectivity” belongs to a separate EVPN issue: a shared Ethernet segment loses its fast convergence properties after an ESI-LAG peer receives an inconsistent configuration. It does not explain the condition tested here.
Question 217
A Junos enterprise team investigates this incident: An uplink meets long-term bandwidth policy but legitimate short bursts exceed the token-bucket allowance. Which technical explanation most directly identifies the cause or design principle?
- Policing behavior depends on both committed rate and burst tolerance; a badly chosen burst parameter can penalize valid traffic.
- Queue schedulers and buffer parameters influence service rate and delay/drop behavior at congested egress.
- Packet loss priority differentiates drop susceptibility within a forwarding class and works with the configured queue/drop behavior.
- Junos ingress classifiers map packet header code points to forwarding classes and packet loss priority, subject to interface attachment.
Explanation
Correct Answer
A:Policing behavior depends on both committed rate and burst tolerance; a badly chosen burst parameter can penalize valid traffic. The appropriate response is to measure burst patterns and adjust the policer burst configuration within the authorized service contract.
Incorrect Answers
B:“Queue schedulers and buffer parameters influence service rate and delay/drop behavior at congested egress” belongs to a separate Class of Service (CoS) issue: a backup traffic queue consumes too much buffer and latency-sensitive applications starve during peak bursts. It does not explain the condition tested here.
C:“Packet loss priority differentiates drop susceptibility within a forwarding class and works with the configured queue/drop behavior” belongs to a separate Class of Service (CoS) issue: a business wants out-of-profile marked traffic to drop earlier than in-profile traffic within one forwarding class. It does not explain the condition tested here.
D:“Junos ingress classifiers map packet header code points to forwarding classes and packet loss priority, subject to interface attachment” belongs to a separate Class of Service (CoS) issue: a campus uplink transmits marked video as ordinary data because no behavior-aggregate classifier is attached at ingress. It does not explain the condition tested here.
Question 218
A Junos enterprise team investigates this incident: A phone's LLDP-negotiated power demand exceeds its access port's allocated PoE limit and it repeatedly restarts. Which technical explanation most directly identifies the cause or design principle?
- Voice/data split depends on compatible VLAN membership, accepted 802.1Q tagging and endpoint network policy.
- LLDP-MED extends device discovery with telephony-related network-policy TLVs that need compatible endpoint behavior.
- Base LLDP discovery and LLDP-MED telephony advertisement are distinct capabilities and may require separate enablement.
- Physical PoE delivery and negotiated device power requirements must match switch and endpoint capabilities.
Explanation
Correct Answer
D:Physical PoE delivery and negotiated device power requirements must match switch and endpoint capabilities. The appropriate response is to inspect PoE class, per-port priority and available chassis budget, and move to a supported powered port if needed.
Incorrect Answers
A:“Voice/data split depends on compatible VLAN membership, accepted 802.1Q tagging and endpoint network policy” belongs to a separate IP Telephony Features issue: a desk phone sends tagged voice traffic, but the switchport permits only the untagged data VLAN. It does not explain the condition tested here.
B:“LLDP-MED extends device discovery with telephony-related network-policy TLVs that need compatible endpoint behavior” belongs to a separate IP Telephony Features issue: a vendor handset discovers its neighbor using basic LLDP but does not learn the configured network policy for voice tagging. It does not explain the condition tested here.
C:“Base LLDP discovery and LLDP-MED telephony advertisement are distinct capabilities and may require separate enablement” belongs to a separate IP Telephony Features issue: a powered endpoint detects a Junos switch but fails to negotiate voice prioritization because only ordinary LLDP is enabled. It does not explain the condition tested here.
Question 219
To prevent recurrence of this precise networking failure, which practice should be adopted? A corporate laptop presents valid 802.1X credentials but stays unauthorized because the switch is using the wrong RADIUS server profile.
- Test fail-open/fail-closed decisions and platform-specific fallback capabilities in disaster recovery exercises.
- Monitor RADIUS reachability and validate each switch's authentication server profile during onboarding.
- Track hardware, software edition and port family when standardizing access policies.
- Require inventory ownership and anomaly monitoring for MAC RADIUS exceptions.
Explanation
Correct Answer
B:Monitor RADIUS reachability and validate each switch's authentication server profile during onboarding. This guards against 802.1X authorization depends on the authenticator, supplicant and authentication-server conversation being correctly connected.
Incorrect Answers
A:“Test fail-open/fail-closed decisions and platform-specific fallback capabilities in disaster recovery exercises” belongs to a separate Layer 2 Authentication and Access Control issue: after a RADIUS outage, the access switch opens ports broadly instead of applying the approved restricted server-fail VLAN. It does not explain the condition tested here.
C:“Track hardware, software edition and port family when standardizing access policies” belongs to a separate Layer 2 Authentication and Access Control issue: an access switch is moved to Junos OS Evolved but the team assumes every earlier guest-VLAN feature still exists on L2 802.1X interfaces. It does not explain the condition tested here.
D:“Require inventory ownership and anomaly monitoring for MAC RADIUS exceptions” belongs to a separate Layer 2 Authentication and Access Control issue: a MAC RADIUS device changes its network adapter and can no longer authenticate because its registered identifier is stale. It does not explain the condition tested here.
Question 220
To prevent recurrence of this precise networking failure, which practice should be adopted? OSPFv3 peering comes up but the desired IPv6 loopback is not in the routing database after a rollout.
- Validate per-interface OSPF area assignments from an approved topology matrix before commit.
- Document expected external metrics and run primary/backup failover tests during policy changes.
- Include a checklist of advertised IPv6 service and loopback addresses in OSPFv3 acceptance.
- Specify preferred OSPF DR candidates on shared transit segments and account for non-preemptive elections.
Explanation
Correct Answer
C:Include a checklist of advertised IPv6 service and loopback addresses in OSPFv3 acceptance. This guards against an established OSPFv3 neighbor does not prove every desired IPv6 interface prefix is included in the protocol topology.
Incorrect Answers
A:“Validate per-interface OSPF area assignments from an approved topology matrix before commit” belongs to a separate Interior Gateway Protocols (IGPs) issue: a campus OSPF interface is accidentally placed in area 0 while its neighbor advertises a nonbackbone area, preventing a Full adjacency. It does not explain the condition tested here.
B:“Document expected external metrics and run primary/backup failover tests during policy changes” belongs to a separate Interior Gateway Protocols (IGPs) issue: a branch receives two external paths with different metric-type assumptions after a policy change and prefers the wrong exit. It does not explain the condition tested here.
D:“Specify preferred OSPF DR candidates on shared transit segments and account for non-preemptive elections” belongs to a separate Interior Gateway Protocols (IGPs) issue: an aggregation broadcast VLAN has a DR/BDR placement that conflicts with the approved design after a maintenance reboot. It does not explain the condition tested here.
Enterprise Routing and Switching, Professional (JNCIP-ENT) (JN0-650) Practice Tests